lkml.org 
[lkml]   [2004]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    Subjectprocesses hung in D (raid5/dm/ext3)
    From
    I'm getting processes hung in the D state accessing the mount point of
    the home directories on my file server - the same machine for which I
    just described a problem about NFS, see:

    Message-ID: <20040615000436.GA12516@porto.bmb.uga.edu>
    or
    http://www.uwsg.iu.edu/hypermail/linux/kernel/0406.1/1345.html

    The filesystem in question is ext3 on LVM2 on software RAID5. The past
    two nights in a row (I created the raid array on Sunday) system backups
    or updatedb processes get hung accessing /export/home. Since this is a
    frequently accessed directory, basically all of the processes on the
    system eventually get hung requiring a reboot by sysrq. I manually
    fscked both /export/home and / and both are fine after reboot.

    The kernel is 2.6.7-rc3-bk4 with 2 patches:

    http://www.uwsg.iu.edu/hypermail/linux/kernel/0406.1/0996.html
    http://www.uwsg.iu.edu/hypermail/linux/kernel/0406.1/0889.html

    The raid array and PV/VG/LVs were created under 2.6.5 with the 32/64
    dm-ioctl.h patch (this is a 64-bit machine with a 32-bit userspace).

    Please let me know if any other information would help in tracking this
    down, I am *very* eager to get this fixed...

    Thanks for your help,
    -ryan

    #
    # Automatically generated make config: don't edit
    #
    CONFIG_X86_64=y
    CONFIG_64BIT=y
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_RWSEM_GENERIC_SPINLOCK=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_EARLY_PRINTK=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_GENERIC_ISA_DMA=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y
    CONFIG_STANDALONE=y

    #
    # General setup
    #
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    # CONFIG_POSIX_MQUEUE is not set
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    CONFIG_LOG_BUF_SHIFT=17
    CONFIG_HOTPLUG=y
    # CONFIG_IKCONFIG is not set
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_KMOD is not set
    CONFIG_STOP_MACHINE=y

    #
    # Processor type and features
    #
    CONFIG_MK8=y
    # CONFIG_MPSC is not set
    # CONFIG_GENERIC_CPU is not set
    CONFIG_X86_L1_CACHE_BYTES=64
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_X86_TSC=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_MICROCODE=y
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_MTRR=y
    CONFIG_SMP=y
    # CONFIG_PREEMPT is not set
    # CONFIG_SCHED_SMT is not set
    CONFIG_K8_NUMA=y
    CONFIG_DISCONTIGMEM=y
    CONFIG_NUMA=y
    CONFIG_HAVE_DEC_LOCK=y
    CONFIG_NR_CPUS=8
    CONFIG_GART_IOMMU=y
    CONFIG_SWIOTLB=y
    CONFIG_X86_MCE=y

    #
    # Power management options
    #
    # CONFIG_PM is not set

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    # CONFIG_ACPI_AC is not set
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_TOSHIBA is not set
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI etc.)
    #
    CONFIG_PCI=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y

    #
    # PCMCIA/CardBus support
    #
    # CONFIG_PCMCIA is not set

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats / Emulations
    #
    CONFIG_BINFMT_ELF=y
    # CONFIG_BINFMT_MISC is not set
    CONFIG_IA32_EMULATION=y
    # CONFIG_IA32_AOUT is not set
    CONFIG_COMPAT=y
    CONFIG_SYSVIPC_COMPAT=y
    CONFIG_UID16=y

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    # CONFIG_FW_LOADER is not set
    # CONFIG_DEBUG_DRIVER is not set

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    CONFIG_PARPORT_PC_CML1=y
    # CONFIG_PARPORT_SERIAL is not set
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    # CONFIG_PARPORT_OTHER is not set
    # CONFIG_PARPORT_1284 is not set

    #
    # Plug and Play support
    #

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=y
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=y
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_CARMEL is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_SIZE=4096
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_LBD=y

    #
    # ATA/ATAPI/MFM/RLL support
    #
    # CONFIG_IDE is not set

    #
    # SCSI device support
    #
    CONFIG_SCSI=y
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    CONFIG_CHR_DEV_ST=y
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    CONFIG_CHR_DEV_SG=y

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI Transport Attributes
    #
    CONFIG_SCSI_SPI_ATTRS=y
    # CONFIG_SCSI_FC_ATTRS is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_MEGARAID is not set
    # CONFIG_SCSI_SATA is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    CONFIG_SCSI_SYM53C8XX_2=y
    CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
    CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
    CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
    # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    CONFIG_SCSI_QLA2XXX=y
    # CONFIG_SCSI_QLA21XX is not set
    # CONFIG_SCSI_QLA22XX is not set
    # CONFIG_SCSI_QLA2300 is not set
    # CONFIG_SCSI_QLA2322 is not set
    # CONFIG_SCSI_QLA6312 is not set
    # CONFIG_SCSI_QLA6322 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_DEBUG is not set

    #
    # Multi-device support (RAID and LVM)
    #
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    # CONFIG_MD_LINEAR is not set
    # CONFIG_MD_RAID0 is not set
    CONFIG_MD_RAID1=y
    CONFIG_MD_RAID5=y
    # CONFIG_MD_RAID6 is not set
    # CONFIG_MD_MULTIPATH is not set
    CONFIG_BLK_DEV_DM=y
    # CONFIG_DM_CRYPT is not set

    #
    # Fusion MPT device support
    #
    CONFIG_FUSION=y
    CONFIG_FUSION_MAX_SGE=40
    CONFIG_FUSION_ISENSE=m
    # CONFIG_FUSION_CTL is not set

    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    # CONFIG_NETLINK_DEV is not set
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_IPV6 is not set
    # CONFIG_NETFILTER is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_SCTP is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # CONFIG_NET_FASTROUTE is not set
    # CONFIG_NET_HW_FLOWCONTROL is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    CONFIG_NETDEVICES=y
    # CONFIG_DUMMY is not set
    CONFIG_BONDING=m
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    # CONFIG_NET_ETHERNET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SK98LIN is not set
    CONFIG_TIGON3=y

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input I/O drivers
    #
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_INPUT_MOUSE is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_ACPI=y
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    CONFIG_PRINTER=y
    # CONFIG_LP_CONSOLE is not set
    # CONFIG_PPDEV is not set
    # CONFIG_TIPAR is not set
    # CONFIG_QIC02_TAPE is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    CONFIG_WATCHDOG=y
    # CONFIG_WATCHDOG_NOWAYOUT is not set

    #
    # Watchdog Device Drivers
    #
    CONFIG_SOFT_WATCHDOG=y
    # CONFIG_ACQUIRE_WDT is not set
    # CONFIG_ADVANTECH_WDT is not set
    # CONFIG_ALIM1535_WDT is not set
    # CONFIG_ALIM7101_WDT is not set
    # CONFIG_SC520_WDT is not set
    # CONFIG_EUROTECH_WDT is not set
    # CONFIG_IB700_WDT is not set
    # CONFIG_WAFER_WDT is not set
    # CONFIG_I8XX_TCO is not set
    # CONFIG_SC1200_WDT is not set
    # CONFIG_SCx200_WDT is not set
    # CONFIG_60XX_WDT is not set
    # CONFIG_CPU5_WDT is not set
    # CONFIG_W83627HF_WDT is not set
    # CONFIG_W83877F_WDT is not set
    # CONFIG_MACHZ_WDT is not set

    #
    # PCI-based Watchdog Cards
    #
    # CONFIG_PCIPCWATCHDOG is not set
    # CONFIG_WDTPCI is not set

    #
    # USB-based Watchdog Cards
    #
    # CONFIG_USBPCWATCHDOG is not set
    CONFIG_HW_RANDOM=y
    # CONFIG_NVRAM is not set
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set

    #
    # Ftape, the floppy tape device driver
    #
    CONFIG_AGP=y
    CONFIG_AGP_AMD64=y
    # CONFIG_AGP_INTEL_MCH is not set
    # CONFIG_DRM is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    CONFIG_HANGCHECK_TIMER=y

    #
    # I2C support
    #
    CONFIG_I2C=y
    CONFIG_I2C_CHARDEV=y

    #
    # I2C Algorithms
    #
    # CONFIG_I2C_ALGOBIT is not set
    # CONFIG_I2C_ALGOPCF is not set

    #
    # I2C Hardware Bus support
    #
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    CONFIG_I2C_AMD8111=y
    # CONFIG_I2C_I801 is not set
    # CONFIG_I2C_I810 is not set
    CONFIG_I2C_ISA=y
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_PARPORT is not set
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_PROSAVAGE is not set
    # CONFIG_I2C_SAVAGE4 is not set
    # CONFIG_SCx200_ACB is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # CONFIG_I2C_VOODOO3 is not set

    #
    # Hardware Sensors Chip support
    #
    CONFIG_I2C_SENSOR=y
    # CONFIG_SENSORS_ADM1021 is not set
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_FSCHER is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    CONFIG_SENSORS_LM85=y
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_VIA686A is not set
    CONFIG_SENSORS_W83781D=y
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83627HF is not set

    #
    # Other I2C Chip support
    #
    # CONFIG_SENSORS_EEPROM is not set
    # CONFIG_SENSORS_PCF8574 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_SENSORS_RTC8564 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set

    #
    # Graphics support
    #
    # CONFIG_FB is not set
    # CONFIG_VIDEO_SELECT is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y

    #
    # Sound
    #
    # CONFIG_SOUND is not set

    #
    # USB support
    #
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_BANDWIDTH is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
    # CONFIG_USB_OHCI_HCD is not set
    CONFIG_USB_UHCI_HCD=y

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_BLUETOOTH_TTY is not set
    # CONFIG_USB_ACM is not set
    # CONFIG_USB_PRINTER is not set
    CONFIG_USB_STORAGE=y
    # CONFIG_USB_STORAGE_DEBUG is not set
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_DPCM is not set
    # CONFIG_USB_STORAGE_HP8200e is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set

    #
    # USB Human Interface Devices (HID)
    #
    # CONFIG_USB_HID is not set

    #
    # USB HID Boot Protocol drivers
    #
    # CONFIG_USB_KBD is not set
    # CONFIG_USB_MOUSE is not set
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_MTOUCH is not set
    # CONFIG_USB_EGALAX is not set
    # CONFIG_USB_XPAD is not set
    # CONFIG_USB_ATI_REMOTE is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_HPUSBSCSI is not set

    #
    # USB Multimedia devices
    #
    # CONFIG_USB_DABUSB is not set

    #
    # Video4Linux support is needed for USB Multimedia device support
    #

    #
    # USB Network adaptors
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set

    #
    # USB port drivers
    #
    # CONFIG_USB_USS720 is not set

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_TIGL is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGETSERVO is not set
    # CONFIG_USB_TEST is not set

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    # CONFIG_EXT2_FS_XATTR is not set
    CONFIG_EXT3_FS=y
    # CONFIG_EXT3_FS_XATTR is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    # CONFIG_QUOTA is not set
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    # CONFIG_ZISOFS is not set
    # CONFIG_UDF_FS is not set

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    # CONFIG_NTFS_FS is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    # CONFIG_DEVFS_FS is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    # CONFIG_NFS_V4 is not set
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=y
    CONFIG_NFSD_V3=y
    # CONFIG_NFSD_V4 is not set
    CONFIG_NFSD_TCP=y
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=y
    CONFIG_SUNRPC=y
    # CONFIG_RPCSEC_GSS_KRB5 is not set
    # CONFIG_SMB_FS is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=y

    #
    # Profiling support
    #
    # CONFIG_PROFILING is not set

    #
    # Kernel hacking
    #
    CONFIG_DEBUG_KERNEL=y
    # CONFIG_DEBUG_SLAB is not set
    CONFIG_MAGIC_SYSRQ=y
    CONFIG_DEBUG_SPINLOCK=y
    # CONFIG_INIT_DEBUG is not set
    # CONFIG_DEBUG_INFO is not set
    # CONFIG_FRAME_POINTER is not set
    # CONFIG_IOMMU_DEBUG is not set

    #
    # Security options
    #
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    # CONFIG_CRYPTO is not set

    #
    # Library routines
    #
    # CONFIG_CRC32 is not set
    # CONFIG_LIBCRC32C is not set


    Bootdata ok (command line is BOOT_IMAGE=Linux ro root=851 console=ttyS0,19200n8)
    Linux version 2.6.7-rc3-bk4 (root@carignan) (gcc version 3.3.2 20030908 (Debian prerelease)) #6 SMP Sun Jun 13 00:37:31 EDT 2004
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
    BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
    BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
    BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
    Scanning NUMA topology in Northbridge 24
    Number of nodes 2 (10010)
    Node 0 MemBase 0000000000000000 Limit 000000003fffffff
    Node 1 MemBase 0000000040000000 Limit 000000007fff0000
    Using node hash shift of 24
    Bootmem setup node 0 0000000000000000-000000003fffffff
    Bootmem setup node 1 0000000040000000-000000007fff0000
    No mptable found.
    On node 0 totalpages: 262143
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 258047 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    On node 1 totalpages: 262128
    DMA zone: 0 pages, LIFO batch:1
    Normal zone: 262128 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f4680
    ACPI: XSDT (v001 A M I OEMXSDT 0x06000318 MSFT 0x00000097) @ 0x000000007fff0100
    ACPI: FADT (v001 A M I OEMFACP 0x06000318 MSFT 0x00000097) @ 0x000000007fff0281
    ACPI: MADT (v001 A M I OEMAPIC 0x06000318 MSFT 0x00000097) @ 0x000000007fff0380
    ACPI: OEMB (v001 A M I OEMBIOS 0x06000318 MSFT 0x00000097) @ 0x000000007ffff040
    ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000007fff3530
    ACPI: DSDT (v001 0ABCF 0ABCF007 0x00000007 INTL 0x02002026) @ 0x0000000000000000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:5 APIC version 16
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 15:5 APIC version 16
    ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
    IOAPIC[0]: Assigned apic_id 2
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x03] address[0xfebfe000] global_irq_base[0x18])
    IOAPIC[1]: Assigned apic_id 3
    IOAPIC[1]: apic_id 3, version 17, address 0xfebfe000, GSI 24-27
    ACPI: IOAPIC (id[0x04] address[0xfebff000] global_irq_base[0x1c])
    IOAPIC[2]: Assigned apic_id 4
    IOAPIC[2]: apic_id 4, version 17, address 0xfebff000, GSI 28-31
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    Checking aperture...
    CPU 0: aperture @ 1ee0000000 size 64 MB
    Aperture from northbridge cpu 0 beyond 4GB. Ignoring.
    No AGP bridge found
    Built 2 zonelists
    Kernel command line: BOOT_IMAGE=Linux ro root=851 console=ttyS0,19200n8
    Initializing CPU#0
    PID hash table entries: 16 (order 4: 256 bytes)
    time.c: Using 1.193182 MHz PIT timer.
    time.c: Detected 1394.659 MHz processor.
    Console: colour VGA+ 80x25
    Memory: 2062444k/2097088k available (2625k kernel code, 0k reserved, 1205k data, 180k init)
    Calibrating delay loop... 2736.12 BogoMIPS
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    Using local APIC NMI watchdog using perfctr0
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU0: AMD Opteron(tm) Processor 240 stepping 01
    per-CPU timeslice cutoff: 1023.75 usecs.
    task migration cache decay timeout: 2 msecs.
    Booting processor 1/1 rip 6000 rsp 10040e3ff58
    Initializing CPU#1
    Calibrating delay loop... 2785.28 BogoMIPS
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    AMD Opteron(tm) Processor 240 stepping 01
    Total of 2 processors activated (5521.40 BogoMIPS).
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 4-0, 4-1, 4-2, 4-3 not connected.
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    Using local APIC timer interrupts.
    Detected 12.452 MHz APIC timer.
    checking TSC synchronization across 2 CPUs: passed.
    time.c: Using PIT/TSC based timekeeping.
    Brought up 2 CPUs
    CPU0: online
    domain 0: span 01
    groups: 01
    domain 1: span 03
    groups: 01 02
    CPU1: online
    domain 0: span 02
    groups: 02
    domain 1: span 03
    groups: 02 01
    NET: Registered protocol family 16
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040326
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
    00:00:07[A] -> 2-16 -> IRQ 16
    IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
    00:00:07[B] -> 2-17 -> IRQ 17
    IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1)
    00:00:07[C] -> 2-18 -> IRQ 18
    IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
    00:00:07[D] -> 2-19 -> IRQ 19
    IOAPIC[1]: Set PCI routing entry (3-3 -> 0xc9 -> IRQ 27 Mode:1 Active:1)
    00:02:08[A] -> 3-3 -> IRQ 27
    IOAPIC[1]: Set PCI routing entry (3-0 -> 0xd1 -> IRQ 24 Mode:1 Active:1)
    00:02:08[B] -> 3-0 -> IRQ 24
    IOAPIC[1]: Set PCI routing entry (3-1 -> 0xd9 -> IRQ 25 Mode:1 Active:1)
    00:02:08[C] -> 3-1 -> IRQ 25
    IOAPIC[1]: Set PCI routing entry (3-2 -> 0xe1 -> IRQ 26 Mode:1 Active:1)
    00:02:08[D] -> 3-2 -> IRQ 26
    IOAPIC[2]: Set PCI routing entry (4-0 -> 0xe9 -> IRQ 28 Mode:1 Active:1)
    00:01:03[A] -> 4-0 -> IRQ 28
    IOAPIC[2]: Set PCI routing entry (4-1 -> 0x32 -> IRQ 29 Mode:1 Active:1)
    00:01:03[B] -> 4-1 -> IRQ 29
    IOAPIC[2]: Set PCI routing entry (4-2 -> 0x3a -> IRQ 30 Mode:1 Active:1)
    00:01:03[C] -> 4-2 -> IRQ 30
    IOAPIC[2]: Set PCI routing entry (4-3 -> 0x42 -> IRQ 31 Mode:1 Active:1)
    00:01:03[D] -> 4-3 -> IRQ 31
    number of MP IRQ sources: 16.
    number of IO-APIC #2 registers: 24.
    number of IO-APIC #3 registers: 4.
    number of IO-APIC #4 registers: 4.
    testing the IO APIC.......................

    IO APIC #2......
    .... register #00: 02000000
    ....... : physical APIC id: 02
    .... register #01: 00170011
    ....... : max redirection entries: 0017
    ....... : PRQ implemented: 0
    ....... : IO APIC version: 0011
    .... register #02: 02000000
    ....... : arbitration: 02
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 000 00 1 0 0 0 0 0 0 00
    01 001 01 0 0 0 0 0 1 1 39
    02 001 01 0 0 0 0 0 1 1 31
    03 001 01 0 0 0 0 0 1 1 41
    04 001 01 0 0 0 0 0 1 1 49
    05 001 01 0 0 0 0 0 1 1 51
    06 001 01 0 0 0 0 0 1 1 59
    07 001 01 0 0 0 0 0 1 1 61
    08 001 01 0 0 0 0 0 1 1 69
    09 001 01 0 1 0 1 0 1 1 71
    0a 001 01 0 0 0 0 0 1 1 79
    0b 001 01 0 0 0 0 0 1 1 81
    0c 001 01 0 0 0 0 0 1 1 89
    0d 001 01 0 0 0 0 0 1 1 91
    0e 001 01 0 0 0 0 0 1 1 99
    0f 001 01 0 0 0 0 0 1 1 A1
    10 001 01 1 1 0 1 0 1 1 A9
    11 001 01 1 1 0 1 0 1 1 B1
    12 001 01 1 1 0 1 0 1 1 B9
    13 001 01 1 1 0 1 0 1 1 C1
    14 000 00 1 0 0 0 0 0 0 00
    15 000 00 1 0 0 0 0 0 0 00
    16 000 00 1 0 0 0 0 0 0 00
    17 000 00 1 0 0 0 0 0 0 00

    IO APIC #3......
    .... register #00: 03000000
    ....... : physical APIC id: 03
    .... register #01: 00030011
    ....... : max redirection entries: 0003
    ....... : PRQ implemented: 0
    ....... : IO APIC version: 0011
    .... register #02: 00000000
    ....... : arbitration: 00
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 001 01 1 1 0 1 0 1 1 D1
    01 001 01 1 1 0 1 0 1 1 D9
    02 001 01 1 1 0 1 0 1 1 E1
    03 001 01 1 1 0 1 0 1 1 C9

    IO APIC #4......
    .... register #00: 04000000
    ....... : physical APIC id: 04
    .... register #01: 00030011
    ....... : max redirection entries: 0003
    ....... : PRQ implemented: 0
    ....... : IO APIC version: 0011
    .... register #02: 00000000
    ....... : arbitration: 00
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 001 01 1 1 0 1 0 1 1 E9
    01 001 01 1 1 0 1 0 1 1 32
    02 001 01 1 1 0 1 0 1 1 3A
    03 001 01 1 1 0 1 0 1 1 42
    IRQ to pin mappings:
    IRQ0 -> 0:2
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    IRQ16 -> 0:16
    IRQ17 -> 0:17
    IRQ18 -> 0:18
    IRQ19 -> 0:19
    IRQ24 -> 1:0
    IRQ25 -> 1:1
    IRQ26 -> 1:2
    IRQ27 -> 1:3
    IRQ28 -> 2:0
    IRQ29 -> 2:1
    IRQ30 -> 2:2
    IRQ31 -> 2:3
    .................................... done.
    PCI: Using ACPI for IRQ routing
    PCI-DMA: Disabling IOMMU.
    IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
    IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    ACPI: Power Button (FF) [PWRF]
    ACPI: Processor [CPU1] (supports C1, 8 throttling states)
    ACPI: Processor [CPU2] (supports C1)
    lp: driver loaded but no devices found
    Real Time Clock Driver v1.12
    hw_random: AMD768 system management I/O registers at 0x5000.
    hw_random hardware driver 1.0.0 loaded
    Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
    Linux agpgart interface v0.100 (c) Dave Jones
    Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    parport0: PC-style at 0x378 [PCSPP(,...)]
    lp0: using parport0 (polling).
    Using anticipatory io scheduler
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    tg3.c:v3.5 (May 25, 2004)
    eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:51:d6:c9
    eth0: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
    eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:51:d6:ca
    eth1: HostTXDS[0] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
    sym0: <875> rev 0x26 at pci 0000:03:04.0 irq 16
    sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
    sym0: open drain IRQ line driver, using on-chip SRAM
    sym0: using LOAD/STORE-based firmware.
    sym0: SCSI BUS has been reset.
    scsi0 : sym-2.1.18j
    Vendor: SONY Model: SDX-400C Rev: 0702
    Type: Sequential-Access ANSI SCSI revision: 02
    scsi(0:0:4:0): Beginning Domain Validation
    sym0:4: wide asynchronous.
    sym0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
    scsi(0:0:4:0): Domain Validation skipping write tests
    scsi(0:0:4:0): Ending Domain Validation
    Vendor: OVERLAND Model: LIBRARYPRO Rev: 0417
    Type: Medium Changer ANSI SCSI revision: 02
    scsi(0:0:6:0): Beginning Domain Validation
    sym0:6: wide asynchronous.
    sym0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100.0 ns, offset 15)
    scsi(0:0:6:0): Domain Validation skipping write tests
    scsi(0:0:6:0): Ending Domain Validation
    st: Version 20040403, fixed bufsize 32768, s/g segs 256
    Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0
    st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575
    Attached scsi generic sg0 at scsi0, channel 0, id 4, lun 0, type 1
    Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 8
    Fusion MPT base driver 3.01.06
    Copyright (c) 1999-2004 LSI Logic Corporation
    mptbase: Initiating ioc0 bringup
    ioc0: 53C1030: Capabilities={Initiator}
    mptbase: Initiating ioc1 bringup
    ioc1: 53C1030: Capabilities={Initiator}
    Fusion MPT SCSI Host driver 3.01.06
    scsi1 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=24
    Vendor: SUPER Model: GEM318 Rev: 0
    Type: Processor ANSI SCSI revision: 02
    Attached scsi generic sg2 at scsi1, channel 0, id 8, lun 0, type 3
    Vendor: SEAGATE Model: ST3146807LC Rev: 0006
    Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sda: 286749488 512-byte hdwr sectors (146816 MB)
    SCSI device sda: drive cache: write back
    sda: sda1
    Attached scsi disk sda at scsi1, channel 0, id 9, lun 0
    Attached scsi generic sg3 at scsi1, channel 0, id 9, lun 0, type 0
    Vendor: SEAGATE Model: ST3146807LC Rev: 0006
    Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sdb: 286749488 512-byte hdwr sectors (146816 MB)
    SCSI device sdb: drive cache: write back
    sdb: sdb1
    Attached scsi disk sdb at scsi1, channel 0, id 10, lun 0
    Attached scsi generic sg4 at scsi1, channel 0, id 10, lun 0, type 0
    Vendor: SEAGATE Model: ST3146807LC Rev: 0006
    Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sdc: 286749488 512-byte hdwr sectors (146816 MB)
    SCSI device sdc: drive cache: write back
    sdc: sdc1
    Attached scsi disk sdc at scsi1, channel 0, id 11, lun 0
    Attached scsi generic sg5 at scsi1, channel 0, id 11, lun 0, type 0
    Vendor: SEAGATE Model: ST3146807LC Rev: 0007
    Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sdd: 286749488 512-byte hdwr sectors (146816 MB)
    SCSI device sdd: drive cache: write back
    sdd: sdd1
    Attached scsi disk sdd at scsi1, channel 0, id 12, lun 0
    Attached scsi generic sg6 at scsi1, channel 0, id 12, lun 0, type 0
    Vendor: SEAGATE Model: ST3146807LC Rev: 0007
    Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sde: 286749488 512-byte hdwr sectors (146816 MB)
    SCSI device sde: drive cache: write back
    sde: sde1
    Attached scsi disk sde at scsi1, channel 0, id 13, lun 0
    Attached scsi generic sg7 at scsi1, channel 0, id 13, lun 0, type 0
    scsi2 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=25
    Vendor: SEAGATE Model: ST336607LW Rev: 0007
    Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sdf: 71687372 512-byte hdwr sectors (36704 MB)
    SCSI device sdf: drive cache: write back
    sdf: sdf1 sdf2 sdf3 sdf4
    Attached scsi disk sdf at scsi2, channel 0, id 0, lun 0
    Attached scsi generic sg8 at scsi2, channel 0, id 0, lun 0, type 0
    USB Universal Host Controller Interface driver v2.2
    Initializing USB Mass Storage driver...
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    mice: PS/2 mouse device common for all mice
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    i2c /dev entries driver
    md: raid1 personality registered as nr 3
    md: raid5 personality registered as nr 4
    raid5: measuring checksumming speed
    generic_sse: 4256.000 MB/sec
    raid5: using function: generic_sse (4256.000 MB/sec)
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
    NET: Registered protocol family 2
    IP: routing cache hash table of 8192 buckets, 128Kbytes
    TCP: Hash tables configured (established 262144 bind 65536)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: considering sde1 ...
    md: adding sde1 ...
    md: adding sdd1 ...
    md: adding sdc1 ...
    md: adding sdb1 ...
    md: adding sda1 ...
    md: created md0
    md: bind<sda1>
    md: bind<sdb1>
    md: bind<sdc1>
    md: bind<sdd1>
    md: bind<sde1>
    md: running: <sde1><sdd1><sdc1><sdb1><sda1>
    raid5: device sde1 operational as raid disk 4
    raid5: device sdd1 operational as raid disk 3
    raid5: device sdc1 operational as raid disk 2
    raid5: device sdb1 operational as raid disk 1
    raid5: device sda1 operational as raid disk 0
    raid5: allocated 5300kB for md0
    raid5: raid level 5 set md0 active with 5 out of 5 devices, algorithm 2
    RAID5 conf printout:
    --- rd:5 wd:5 fd:0
    disk 0, o:1, dev:sda1
    disk 1, o:1, dev:sdb1
    disk 2, o:1, dev:sdc1
    disk 3, o:1, dev:sdd1
    disk 4, o:1, dev:sde1
    md: ... autorun DONE.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 180k freed
    Adding 2097136k swap on /dev/sdf2. Priority:-1 extents:1
    EXT3 FS on sdf1, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sdf3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-32, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-34, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-33, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-35, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-0, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-8, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-9, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-10, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-11, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-12, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-13, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-14, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-15, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-16, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-17, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-18, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-19, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-20, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-21, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-22, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-23, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-24, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-25, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-26, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-27, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-28, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-29, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-30, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-31, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Ethernet Channel Bonding Driver: v2.6.0 (January 14, 2004)
    bonding: MII link monitoring set to 100 ms
    bonding: bond0: enslaving eth0 as an active interface with a down link.
    bonding: bond0: enslaving eth1 as an active interface with a down link.
    tg3: eth0: Link is up at 1000 Mbps, full duplex.
    tg3: eth0: Flow control is off for TX and off for RX.
    bonding: bond0: link status definitely up for interface eth0.
    tg3: eth1: Link is up at 1000 Mbps, full duplex.
    tg3: eth1: Flow control is off for TX and off for RX.
    bonding: bond0: link status definitely up for interface eth1.
    nfs warning: mount version older than kernel
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:03    [W:0.101 / U:58.864 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site