lkml.org 
[lkml]   [2004]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5
On Wed, 5 May 2004, Ross Dickson wrote:

> We need it off for nforce2 to get nmi_watchdog=1 working with ioapic
> 8254 timer pin0 timer override patch routing. I vote to revisit Maciej's
> patch that was dropped by Linus after appearing in 2.6.3-mm3.
> For those with problems of clock skew with the timer into pin0 routing,
> that patch gave a virtual wire timer routing which worked well for those
> users.
>
> It also works around problems for ibm users.
> http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-04/4421.html
>
> That patch is last posted here (Maciej please correct me if i'm wrong)
> http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-04/3174.html

That's my latest version, although the one in -mm had a minor readability
improvement, so you may use that one instead.

BTW, can you please check if the chipset fixup cures the timer IRQ line
noise?

--
+ Maciej W. Rozycki, Technical University of Gdansk, Poland +
+--------------------------------------------------------------+
+ e-mail: macro@ds2.pg.gda.pl, PGP key available +
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:02    [W:1.359 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site