[lkml]   [2004]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5
    Am Dienstag, 4. Mai 2004 01:11 schrieb Bartlomiej Zolnierkiewicz:
    > On Tuesday 04 of May 2004 00:09, Allen Martin wrote:
    > > I'm happy to be able to make this information public to the Linux
    > > community. This information has been previously released to BIOS /
    > > board vendors as an appnote, but in the interest of getting a workaround
    > > into the hands of users the quickest we're making it public for possible
    > > inclusion into the Linux kernel.
    > This is a great news! Below is an untested patch to address this issue.
    The patch also applies cleanly to kernel 2.6.5, which is what I am running.
    The machine is now running for more than 21 hours with APIC enabled and it
    seems it is completely stable now. Without the patch I was able to lock the
    system solid in less than a minute by just pushing some MB of data across the
    LAN. I have been running continuous network copies of a 400MB file for about
    8 hours and experienced no problems.

    As a side note: the idle CPU temperature reported by ACPI on my Shuttle
    iDeq200N barebone has gone from approx. 50 degrees down to approx. 43

    Patrick Dreker

    GPG KeyID : 0xFCC2F7A7 (Patrick Dreker)
    Fingerprint: 7A21 FC7F 707A C498 F370 1008 7044 66DA FCC2 F7A7
    Key available from keyservers
    [unhandled content-type:application/pgp-signature]
     \ /
      Last update: 2005-03-22 14:02    [W:0.024 / U:75.148 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site