lkml.org 
[lkml]   [2004]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.6 problem, cd and hd on second ide channel
Date

There is ACPI bug in 2.6.6 related to IRQ routing. Try 2.6.7-rc1.

http://bugme.osdl.org/show_bug.cgi?id=2665

On Thursday 27 of May 2004 19:13, George Georgalis wrote:
> I'm experiencing a problem booting 2.6.6 on a via c3 motherboard.
> A very similar .config works fine with 2.6.5, I've attached a
> diff of a working 2.6.5 .config and a broken .2.6.6 .config; along
> with the full (non working) 2.6.6 config.
>
> Under 2.6.6, when only the cdrom is connected on the second channel
> (/dev/hdd) boot seems normal, until a delay after "ATAPI reset", then
> boot continues normally.
>
> When /dev/hdc is connected, "lost interrupt" errors prevent 2.6.6 from
> booting, but 2.6.5 has no problem.
>
> I've tried toggling the ide interrupt sharing option, doesn't seem to
> have effect on the problem. Below is hdparm output, hdc is identical to
> hda.
>
>
> # hdparm -i /dev/hdd
>
> /dev/hdd:
>
> Model=SONY DVD RW DW-U14A, FwRev=1.0d, SerialNo=FA674550
> Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
> RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
> BuffType=unknown, BuffSize=0kB, MaxMultSect=0
> (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
> IORDY=on/off, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 *udma2
> AdvancedPM=no
> Drive conforms to: device does not report version:
>
>
>
> # hdparm -i /dev/hda
>
> /dev/hda:
>
> Model=Maxtor 6E040L0, FwRev=NAR61EA0, SerialNo=E1PJRQ0E
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80293248
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive conforms to: :
>
> # uname -a
> Linux kw-rox.dynalias.net 2.6.6-c3 #2 Thu May 27 11:45:39 EDT 2004 i686
> unknown
>
> Output of lspci is also attached.
>
> Happy to provide more specific details, for the asking. Any ideas of
> what's going on here, or a fix?
>
> Thanks,
> // George

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:03    [W:0.215 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site