lkml.org 
[lkml]   [2004]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: i810 AGP fails to initialise (was Re: 2.6.6-mm2)
From
Date
Andi Kleen <ak@suse.de> writes:

> On Mon, May 17, 2004 at 09:49:56AM +0100, Sean Neakums wrote:
>> Sean Neakums <sneakums@zork.net> writes:
>>
>> > Sean Neakums <sneakums@zork.net> writes:
>> >
>> >> Andi Kleen <ak@suse.de> writes:
>> >>
>> >>> Sean, can you double check that when you compile the AGP driver as module
>> >>> that the 7124 PCI ID appears in modinfo intel-agp ?
>> >>> And does the module also refuse to load ?
>> >>
>> >> I rebuilt with agpgart, intel-agp and i810 as modules, modprobed them,
>> >> and it works.
>> >
>> > I just realised that I probably forgot to reapply the patch before
>> > doing this test. Will check Monday. Sorry about this.
>>
>> Below is modinfo output. The module loads but doesn't initialise the
>> AGP.
>
> Someone else reported that it worked modular at least. When you apply
> the following patch what output do you get in the kernel log when you
> load the module?

Linux agpgart interface v0.100 (c) Dave Jones
agp_intel_init
agp_intel_probe device 7124
no cap
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:03    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site