Messages in this thread |  | | | From | Bartlomiej Zolnierkiewicz <> | | Subject | Re: HDIO_SET_DMA failed: with nforce2 board | | Date | Mon, 17 May 2004 18:13:07 +0200 |
| |
On Sunday 15 of February 2004 10:18, mike@kordik.net wrote: > > On Monday 17 of May 2004 13:39, Mike Kordik wrote: > >> On Mon, 2004-05-17 at 07:13, Bartlomiej Zolnierkiewicz wrote: > >> > On Monday 17 of May 2004 04:15, Mike wrote: > >> > > I have an nforce2 based board and I cannot enable dma. > >> > > >> > 'dmesg' output, please > >> > >> I posted using PAN and I am trying to respond with PAM but todays posts > >> and some of yesterdays are not showing up. I do not know what the > >> problem is but I apologize for responding this way. Here is my dmesg > >> output: > > > > OK, thanks. > > > >> Linux version 2.6.4-rc1-mm1 (root@cdimage) (gcc version 3.3.3 20040217 > >> (Gentoo Linux 3.3.3, propolice-3.3-7)) #3 Mon May 17 00:17:40 EDT 2004 > > > > ... > > > >> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > >> ide: Assuming 33MHz system bus speed for PIO modes; override with > >> idebus=xx > >> pnp: the driver 'ide' has been registered > >> hda: Maxtor 6Y120L0, ATA DISK drive > >> hdb: WDC WD1600BB-00HTA0, ATA DISK drive > >> hdc: MATSHITADVD-ROM SR-8582, ATAPI CD/DVD-ROM drive > >> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > >> ide1 at 0x170-0x177,0x376 on irq 15 > > > > AMD/nVidia IDE driver didn't recognize the controller > > (or driver wasn't compiled in for some reason). > > > > I need full .config and 'lspci -vvv' output to know more. > > > > Bartlomiej > > Bartlomiej, > Thank you for your help! > > I double checked my boot partition to make sure I actually had copied over > the latest kernel I had compiled and it has the right date and time stamp > on it. > > The info you requessted. > > .config:
Weird, everything looks OK. Can you retest with vanilla 2.6.4-rc1?
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |