lkml.org 
[lkml]   [2004]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: aic79xx trouble
Date
Oh, I forgot the system specifications:

- dual opteron on tyan S2882 board
- vanilla linux-2.4.26

Also, is acpi relevant? It is enabled in the kernel-configuration and the the
kernel prints quite a lot of error messages when it parses the dsdt.


On Thursday 13 May 2004 21:25, Bernd Schubert wrote:
> Hello,
>
> we are just in the process of setting up a new server, which will serve the
> data of an IDE/SCSI raid system (transtec 5008). Some partions of this raid
> device are also mirrored via drbd to a failover system. During a full
> resync of all (3) failover partitions *from* the failover server, the
> main-server first logs many scsi errors and later the access to the
> raid-partitions completely locks up.
>
> Below is some relevant dmesg output, I already enabled the verbose option
> for the aic79xx driver. Should I also enable debugging, if so, which mode?
>
> Any help is highly appreciated.
>
>
> Thanks in advance,
> Bernd
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 14:03    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site