lkml.org 
[lkml]   [2004]   [May]   [12]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
DateWed, 12 May 2004 11:56:14 +0200
FromZoltan Menyhart <>
SubjectWho owns those locks ?
Got a dead lock ?
No idea how you got there ?

Why don't you put the ID of the owner of the lock in the lock word ?
Here is your patch for IA-64.
Doesn't cost any additional instruction, you can have it in your
"production" kernel, too.

The current task pointers are identity mapped memory addresses.
I shift them to the right by 12 bits (these bits are always 0-s).
In that way, addresses up to 16 Tbytes can fit into the lock word.

Interrupt handlers use the current task pointers as IDs, too.
An interrupt handler has to free all the locks it has taken,
therefore using the same ID as the task pre-empted uses, is not
confusing. Locks which are taken with / without interrupt disabling
form two distinct sets.
If you are back into the pre-empted task and should there is a
"left over" lock with the ID of the task => you've got a hint ;-)

In debug mode, you can check if the lock is yours before setting it free:

#define spin_is_mine(x)	((x)->lock == (__u32)((__u64) current >> 12))

Good luck.


Zoltán Menyhárt--- 2.6.5.ref/include/asm-ia64/spinlock.h	Sun Apr  4 05:36:17 2004
+++ 2.6.5.new/include/asm-ia64/spinlock.h	Wed May 12 10:29:38 2004
@@ -45,7 +45,8 @@
 	asm volatile ("{\n\t"
 		      "  mov ar.ccv = r0\n\t"
 		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
+		      /* "  mov r30 = 1;;\n\t" */
+		      "  shr.u r30 = r13, 12;;\n\t"	/* Current task pointer */
 		      "}\n\t"
 		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
 		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
@@ -57,7 +58,8 @@
 	asm volatile ("{\n\t"
 		      "  mov ar.ccv = r0\n\t"
 		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
+		      /* "  mov r30 = 1;;\n\t" */
+		      "  shr.u r30 = r13, 12;;\n\t"	/* Current task pointer */
 		      "}\n\t"
 		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
 		      "cmp4.ne p14, p0 = r30, r0\n"
@@ -68,7 +70,8 @@
 # ifdef CONFIG_ITANIUM
 	/* don't use brl on Itanium... */
 	/* mis-declare, so we get the entry-point, not it's function descriptor: */
-	asm volatile ("mov r30 = 1\n\t"
+	asm volatile (/* "  mov r30 = 1;;\n\t" */
+		      "  shr.u r30 = r13, 12;;\n\t"	/* Current task pointer */
 		      "mov ar.ccv = r0;;\n\t"
 		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
 		      "movl r29 = ia64_spinlock_contention;;\n\t"
@@ -77,7 +80,8 @@
 		      "(p14) br.call.spnt.many b6 = b6"
 		      : "=r"(ptr) : "r"(ptr) : IA64_SPINLOCK_CLOBBERS);
 # else
-	asm volatile ("mov r30 = 1\n\t"
+	asm volatile (/* "  mov r30 = 1;;\n\t" */
+		      "  shr.u r30 = r13, 12;;\n\t"	/* Current task pointer */
 		      "mov ar.ccv = r0;;\n\t"
 		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
 		      "cmp4.ne p14, p0 = r30, r0\n\t"
@@ -89,14 +93,17 @@
 #else /* !ASM_SUPPORTED */
 # define _raw_spin_lock(x)								\
 do {											\
-	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
-	__u64 ia64_spinlock_val;							\
-	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
+	__u32	*ia64_spinlock_ptr = (__u32 *) (x);					\
+	__u64	ia64_spinlock_val;							\
+	__u32	new_spinlock_val = (__u32)((__u64) current >> 12);			\
+											\
+	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, new_spinlock_val, 0);	\
 	if (unlikely(ia64_spinlock_val)) {						\
 		do {									\
 			while (*ia64_spinlock_ptr)					\
 				ia64_barrier();						\
-			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
+			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr,	\
+								new_spinlock_val, 0);	\
 		} while (ia64_spinlock_val);						\
 	}										\
 } while (0)
\
 
 \ /
  Last update: 2005-03-22 13:03    [W:0.425 / U:0.010 seconds]
©2003-2008 Jasper Spaans