Messages in this thread | | | Date | Thu, 29 Apr 2004 21:36:52 -0500 | From | "Justin R. Wilson" <> | Subject | PROBLEM: Network and Sound mutually exclusive |
| |
1. Network works and sound works but not at the same time. 2. My wireless network card and sound card work but they don't work at the same time. I can be surfing the web, then go to play an ogg file and my browser stops dead. When I press pause on the ogg, the browser works again. There is also no error messages which really stumps me. 3. Keywords: networking, wireless, alsa, orinoco_pci 4. Kernel version: 2.4.25-jrw-1 5. Output of Oops... nothing 6. A small shell script or example program which triggers the problem (none) 7. Environment 7.1. Software (add the output of the ver_linux script here) Linux hydrogen 2.4.25-jrw-1 #1 Thu Apr 29 18:55:06 CDT 2004 i686 AMD Athlon(tm) Processor AuthenticAMD GNU/Linux
Gnu C 3.3.2 Gnu make 3.80 util-linux 2.12 mount 2.12 modutils 2.4.26 e2fsprogs 1.34 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.15 Net-tools 1.60 Kbd 1.08 Sh-utils 5.0.91 Modules Loaded tdfx agpgart lp parport_pc parport snd-pcm-oss snd-mixer-oss snd-seq-midi snd-ens1371 snd-pcm snd-page-alloc snd-rawmidi gameport snd-ac97-codec snd-seq-oss snd-seq-midi-event snd-seq snd-timer snd-seq-device snd soundcore msr microcode cpuid via82cxxx orinoco_pci orinoco hermes tulip crc32
7.2. Processor information (from /proc/cpuinfo): processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : AMD Athlon(tm) Processor stepping : 1 cpu MHz : 750.050 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 1497.49
7.3. Module information (from /proc/modules): tdfx 35288 1 agpgart 14544 0 (autoclean) (unused) lp 7200 0 (autoclean) parport_pc 16100 1 parport 26888 1 [lp parport_pc] snd-pcm-oss 38404 0 snd-mixer-oss 13624 1 [snd-pcm-oss] snd-seq-midi 4032 0 (autoclean) (unused) snd-ens1371 13824 2 (autoclean) snd-pcm 62468 0 (autoclean) [snd-pcm-oss snd-ens1371] snd-page-alloc 6804 0 (autoclean) [snd-pcm] snd-rawmidi 14784 0 (autoclean) [snd-seq-midi snd-ens1371] gameport 1676 0 (autoclean) [snd-ens1371] snd-ac97-codec 48284 0 (autoclean) [snd-ens1371] snd-seq-oss 29696 0 (unused) snd-seq-midi-event 3840 0 [snd-seq-midi snd-seq-oss] snd-seq 39024 2 [snd-seq-midi snd-seq-oss snd-seq-midi-event] snd-timer 15844 0 [snd-pcm snd-seq] snd-seq-device 4336 0 [snd-seq-midi snd-rawmidi snd-seq-oss snd-seq] snd 34980 1 [snd-pcm-oss snd-mixer-oss snd-seq-midi snd-ens1371 snd-pcm snd-rawmidi snd-ac97-codec snd-seq-oss snd-seq-midi-event snd-seq snd-timer snd-seq-device] soundcore 4196 8 [snd] msr 1544 0 (unused) microcode 5440 0 (unused) cpuid 1032 0 (unused) via82cxxx 11080 1 orinoco_pci 3364 1 orinoco 37972 0 [orinoco_pci] hermes 6020 0 [orinoco_pci orinoco] tulip 40800 0 (unused) crc32 2912 0 [tulip]
7.4. Loaded driver and hardware information (/proc/ioports, /proc/iomem) 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 9000-90ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100 9000-90ff : tulip 9400-943f : Ensoniq 5880 AudioPCI 9400-943f : Ensoniq AudioPCI b000-b01f : VIA Technologies, Inc. USB (#2) b000-b01f : usb-uhci b400-b41f : VIA Technologies, Inc. USB b400-b41f : usb-uhci b800-b80f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE b800-b807 : ide0 b808-b80f : ide1 d000-dfff : PCI Bus #01 d800-d8ff : 3Dfx Interactive, Inc. Voodoo 3 e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-2ffebfff : System RAM 00189000-002cc2a1 : Kernel code 2ffec000-2ffeefff : ACPI Tables 2ffef000-2fffefff : reserved 2ffff000-2fffffff : ACPI Non-volatile Storage dd800000-dd8003ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100 dd800000-dd8003ff : tulip de000000-e0ffffff : PCI Bus #01 de000000-dfffffff : 3Dfx Interactive, Inc. Voodoo 3 e1000000-e1000fff : Harris Semiconductor Prism 2.5 Wavelan chipset e1f00000-e3ffffff : PCI Bus #01 e2000000-e3ffffff : 3Dfx Interactive, Inc. Voodoo 3 e4000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] ffff0000-ffffffff : reserved
7.5. PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 8023 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: de000000-e0ffffff Prefetchable memory behind bridge: e1f00000-e3ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) Subsystem: Asustek Computer, Inc.: Unknown device 8023 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at b800 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 10) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at b400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 10) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at b000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0a.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) Subsystem: Ensoniq Creative SoundBlaster AudioPCI 128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 9400 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0c.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11) Subsystem: Linksys: Unknown device 0570 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (63750ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 9000 [size=256] Region 1: Memory at dd800000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [c0] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0d.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01) Subsystem: Linksys WMP11 Wireless 802.11b PCI Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: Memory at e1000000 (32-bit, prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA]) Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Interrupt: pin A routed to IRQ 11 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M] Region 2: I/O ports at d800 [size=256] Expansion ROM at e1ff0000 [disabled] [size=64K] Capabilities: [54] AGP version 1.0 Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit+ FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 7.6. SCSI information (from /proc/scsi/scsi): none [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): root@hydrogen proc # cat /proc/interrupts CPU0 0: 244128 XT-PIC timer 1: 6083 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 6176 XT-PIC usb-uhci, usb-uhci, eth1 10: 630 XT-PIC Ensoniq AudioPCI 12: 91229 XT-PIC PS/2 Mouse 14: 12294 XT-PIC ide0 15: 33 XT-PIC ide1 NMI: 0 LOC: 244088 ERR: 51 MIS: 0 root@hydrogen proc #
I've spent a few months looking for a solution and I couldn't find anything so I thought I'd ask the pros. Thanks for everything.
Justin R. Wilson jrw972@mizzou.edu
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |