Messages in this thread | | | Date | Wed, 28 Apr 2004 01:24:05 +0300 (EEST) | From | Panagiotis Papadakos <> | Subject | Re: [BUG] DVD writing in 2.6.6-rc2 |
| |
I think this is a growisofs 5.19 problem. You should download: http://fy.chalmers.se/~appro/linux/DVD+RW/tools/dvd+rw-tools-5.19-1.4.9.7.tar.gz
Panagiotis Papadakos
On Tue, 27 Apr 2004, Kenneth Johansson wrote:
> I have a problem when using growisofs version 5.19. > > The problem is that in the very end when gowisofs tries to flush the > cache. When stracing the process I can see it sits in a call to poll > that never returns. > > I noticed that if I start growisofs and later attach to it with "strace > -p" I can make it continue with killing the strace process. just to see > it hang in the next poll. But re attaching then killing the strace again > a few times and growisofs finally dose a normal exit. > > This happens every time. > > The only unusual thing with my setup is that I only have the DVD burner > on the IDE controller no disks so I guess it's some type of missed > interrupt. > > I looked at the drivers/ide/pci/via82cxxx.c but that one did not do much > apart from setting a few configurations so I guess it's some generic > code that dose the real work. > > ----------VIA BusMastering IDE Configuration---------------- > Driver Version: 3.38 > South Bridge: VIA vt8233a > Revision: ISA 0x0 IDE 0x6 > Highest DMA rate: UDMA133 > BM-DMA base: 0x9800 > PCI clock: 33.3MHz > Master Read Cycle IRDY: 0ws > Master Write Cycle IRDY: 0ws > BM IDE Status Register Read Retry: yes > Max DRDY Pulse Width: No limit > -----------------------Primary IDE-------Secondary IDE------ > Read DMA FIFO flush: yes yes > End Sector FIFO flush: no no > Prefetch Buffer: no no > Post Write Buffer: no no > Enabled: yes yes > Simplex only: no no > Cable Type: 80w 80w > -------------------drive0----drive1----drive2----drive3----- > Transfer Mode: PIO PIO UDMA UDMA > Address Setup: 120ns 120ns 120ns 120ns > Cmd Active: 360ns 360ns 90ns 90ns > Cmd Recovery: 210ns 210ns 30ns 30ns > Data Active: 330ns 330ns 90ns 90ns > Data Recovery: 270ns 270ns 30ns 30ns > Cycle Time: 600ns 600ns 60ns 60ns > Transfer Rate: 3.3MB/s 3.3MB/s 33.3MB/s 33.3MB/s > > > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |