lkml.org 
[lkml]   [2004]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Anyone got aic7xxx working with 2.4.26?
On Mon, Apr 26, 2004 at 03:32:37PM +0100, David Johnson wrote:

> I was wondering if anyone had aic7xxx SCSI working with kernel 2.4.26?

Yep, no problems at all. Upgraded this weekend from 2.4.23 to 2.4.26, and
it Just Worked(tm):

SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 15 for device 00:09.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 19160B Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
(scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
Vendor: QUANTUM Model: ATLAS_V__9_WLS Rev: 0200
Type: Direct-Access ANSI SCSI revision: 03
Vendor: QUANTUM Model: ATLAS_V__9_WLS Rev: 0200
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 64
scsi0:A:6:0: Tagged Queuing enabled. Depth 64
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0
SCSI device sda: 17930694 512-byte hdwr sectors (9181 MB)
Partition check:
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
SCSI device sdb: 17930694 512-byte hdwr sectors (9181 MB)
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >

--
Jurjen Oskam

"Avoid putting a paging file on a fault-tolerant drive, such as a mirrored
volume or a RAID-5 volume. Paging files do not need fault-tolerance." - Q308417
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:02    [W:0.065 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site