lkml.org 
[lkml]   [2004]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: 8139too not working in 2.6 (works now)
    Date
    From

    I tried "acpi=off" and it worked like a charm. He's the new
    /proc/interrupts:

    carbon:~# cat /proc/interrupts
    CPU0 CPU1
    0: 857627 12 IO-APIC-edge timer
    1: 1073 0 IO-APIC-edge i8042
    2: 0 0 XT-PIC cascade
    8: 1 1 IO-APIC-edge rtc
    12: 87 0 IO-APIC-edge i8042
    14: 4103 2 IO-APIC-edge ide0
    15: 4900 2 IO-APIC-edge ide1
    21: 4505 1 IO-APIC-level eth0
    27: 1484 0 IO-APIC-level i91u, uhci_hcd, uhci_hcd,
    uhci_hcd
    NMI: 0 0
    LOC: 857482 857455
    ERR: 0
    MIS: 0

    Hope this helps someone else too.

    Thanks a lot, Mirko.

    On Tue, 27 Apr 2004 00:14:29 +0900, OGAWA Hirofumi
    <hirofumi@mail.parknet.co.jp> wrote:

    > "Mirko Caserta" <mirko@mcaserta.com> writes:
    >
    >> Anyway, it doesn't look like an irq problem to me. It looks more like
    >> a wrong detection of the TX triggering level in the driver.
    >
    > In interrupts-2.6.6-rc2-mm2-broken-out,
    >
    > CPU0 CPU1
    > 0: 103394 48 IO-APIC-edge timer
    > 1: 157 0 IO-APIC-edge i8042
    > 5: 2 1 IO-APIC-edge eth0
    > ^^^^^^^^^^^^-- wrong
    > 8: 2 0 IO-APIC-edge rtc
    > 9: 0 0 IO-APIC-level acpi
    > 11: 3 1 IO-APIC-edge i91u
    > 12: 87 0 IO-APIC-edge i8042
    > 14: 1068 2 IO-APIC-edge ide0
    > 15: 953 1 IO-APIC-edge ide1
    >
    > The above must be IO-APIC-level.
    > And the following is interesting one.
    >
    > ACPI: ACPI tables contain no PCI IRQ routing entries
    > PCI: Invalid ACPI-PCI IRQ routing table
    > PCI: Probing PCI hardware
    > PCI: Using IRQ router default [1106/3091] at 0000:00:00.0
    > PCI BIOS passed nonexistent PCI bus 0!
    > PCI BIOS passed nonexistent PCI bus 0!
    > PCI BIOS passed nonexistent PCI bus 0!
    > PCI BIOS passed nonexistent PCI bus 0!
    > PCI BIOS passed nonexistent PCI bus 0!
    > PCI BIOS passed nonexistent PCI bus 1!
    > PCI BIOS passed nonexistent PCI bus 0!
    >
    > Um.. can you try "pci=noacpi" or "acpi=off"?


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:02    [W:0.024 / U:87.188 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site