lkml.org 
[lkml]   [2004]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Make serial console work for any port (take 2)
Date
The current serial console code only works for ports that are either
defined in SERIAL_PORT_DFNS (and set up by serial8250_isa_init_ports())
or registered by early_serial_setup().

On ia64, SERIAL_PORT_DFNS is empty because we discover everything
via ACPI and PCI. And we only use early_serial_setup() for one port
described by the HCDP firmware table.

This patch against 2.6.4-rc1 makes it work for any valid port. If we
don't know about the port early, we just return -ENODEV from the
setup() function, which leaves the serial console disabled. After the
driver has found all the ports, we try to register the serial console
again if it hasn't been enabled already.

Keith Owens noticed that the first version of this patch broke some
serial console setups because many early serial ports are registered
with "type == PORT_UNKNOWN". So this version tests "port->ops"
instead, and Keith has confirmed that this works for him.

===== drivers/serial/8250.c 1.45 vs edited =====
--- 1.45/drivers/serial/8250.c Mon Feb 16 17:20:22 2004
+++ edited/drivers/serial/8250.c Tue Mar 2 14:24:04 2004
@@ -1976,6 +1976,8 @@
if (co->index >= UART_NR)
co->index = 0;
port = &serial8250_ports[co->index].port;
+ if (!port->ops)
+ return -ENODEV;

/*
* Temporary fix.
@@ -2006,6 +2008,14 @@
return 0;
}
console_initcall(serial8250_console_init);
+
+static int __init serial8250_late_console_init(void)
+{
+ if (!(serial8250_console.flags & CON_ENABLED))
+ register_console(&serial8250_console);
+ return 0;
+}
+late_initcall(serial8250_late_console_init);

#define SERIAL8250_CONSOLE &serial8250_console
#else
===== drivers/serial/serial_core.c 1.81 vs edited =====
--- 1.81/drivers/serial/serial_core.c Sat Feb 21 15:42:50 2004
+++ edited/drivers/serial/serial_core.c Tue Mar 2 14:17:22 2004
@@ -1874,9 +1874,6 @@
if (flow == 'r')
termios.c_cflag |= CRTSCTS;

- if (!port->ops)
- return 0; /* "console=" on ia64 */
-
port->ops->set_termios(port, &termios, NULL);
co->cflag = termios.c_cflag;



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:01    [W:0.041 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site