Messages in this thread | | | Subject | Re: [sata] libata update | From | Jarno Paananen <> | Date | Wed, 31 Mar 2004 04:43:39 +0300 |
| |
Jeff Garzik <jgarzik@pobox.com> writes:
> Petr Sebor wrote: >> Hi Jeff, >> I have upgraded from 2.6.3 to 2.6.5-rc3 and can't see the secondary >> sata drive anymore... > > Does this patch fix it?
I'm using the 2.4 kernel version (would be using 2.6 if there was support for IT8212 ide-"raid" controller, hint hint Bart :) and had the same problem. This fixed it:
libata version 1.02 loaded. sata_via version 0.20 sata_via(00:0f.0): routed to hard irq line 5 ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 20 ata2: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 20 ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3e01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 72303840 sectors (lba48) ata1: dev 0 configured for UDMA/133 ata2: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3e01 87:4003 88:203f ata2: dev 0 ATA, max UDMA/100, 488397168 sectors (lba48) ata2: dev 0 configured for UDMA/100 scsi1 : sata_via scsi2 : sata_via Vendor: ATA Model: WDC WD360GD-00FN Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD2500JD-22F Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Attached scsi disk sda at scsi0, channel 0, id 3, lun 0 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB) sda: sda1 sda2 sda3 < sda5 sda6 sda7 > SCSI device sdb: 72303840 512-byte hdwr sectors (37020 MB) sdb: sdb1 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: sdc1 < sdc5 sdc6 >
(sda is a real SCSI disk)
Thanks,
// Jarno - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |