Messages in this thread | | | From | Dmitry Torokhov <> | Subject | Re: Synaptics touchpad + external mouse with Linux 2.6? | Date | Tue, 23 Mar 2004 01:00:37 -0500 |
| |
On Tuesday 23 March 2004 12:40 am, Aaron Lehmann wrote: > On Mon, Mar 22, 2004 at 11:32:29PM -0500, Dmitry Torokhov wrote: > > Because it is not implementation, it is hardware limitation. Synaptics native > > protocol uses 6 bytes, standard PS/2 3 or 4. The protocols are not compatible > > at all so unless the PC has an active multiplexing controller (which provides > > up to 4 completely independent AUX ports) all devices have to speak the same > > protocol. > > This only matters if you plug in a PS/2 mouse. If you have a USB > mouse, that's another issue entirely. Ideally XFree86 should read > /dev/input/mice and not have to worry about the specifics of the > device.
You can do that if you do not care about extended features, just use /dev/input/mice and all should be fine (well, for tapping to work you will have to pass psmouse.proto as in-kernel synaptics->PS/2 protocol emulation does not process taps).
> When you use the synaptics driver, XFree86 won't accept input > from USB mice. It may be possible to work around this by using > multiple Input sections,
That is correct. You should use one input section for devices speaking PS/2 protocol and other input sections for devices using other protocols.
> but that seems especially awkward when > Synaptics events are presented in both /dev/input/mice and /dev/psaux.
Well, that is not a surprise as /dev/input/mice is a synonim for /dev/psaux in 2.6. If you have your XFree reading from both devices you will get duplicate events no matter what hardware it is (USB, PS/2, Synaptics). Now, default XFree86 Synaptics setup has "auto-dev" protocol and "/dev/psaux" device, but with "auto-dev" protocol the driver actually scans /dev/input/eventX devices for Synaptics and /dev/psaux is only used as a fall-back so the same setup works in 2.4.
> > I recently switched from the synaptics driver reading /dev/psaux to > the generic ImPS/2 driver reading /dev/input/mice. (Note that the only > reason I ever installed the synaptics driver was that a kernel upgrade > forced me to.) It performs bearably, but I personally wish that I > could click by tapping and use the odd scrolling button as button3 > (this only works when I hit the button exactly in the middle).
Try psmouse.proto=bare or psmouse.proto=imps
> At lease I can plug in external mice without hassle.
That means that your hardware does not have the problem I described in my other mail.
-- Dmitry - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |