lkml.org 
[lkml]   [2004]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.3 BUG - can't write DVD-RAM - reported as write-protected
Hi,

to me this seems to be a problem with dvdram drives connected to a scsi
hba.
I've got exactly the same software setup based on 2.6.2 on 3 systems
with
a dvdram drive. One is a Panasonic LFD-201 (SCSI), another one is a
Panasonic
LFD-521 (IDE), the third is an LG-4020B (IDE).

The SCSI LFD-201 is connected to an Adaptec 7890. There is no way I can
use it to write data. A mount always happens read-only. Even though "Can
write DVD-RAM" is reported in /proc/sys/dev/cdrom/info.

Another phenomen: mkfs.ext2 /dev/scd0 runs as usual. No errors or any
other messages. The drive led lightens up. However - the dvdram doesn't
have
an ext2 fs afterwards. If I do a tune2fs -c 0 -t 0 /dev/scd0 it tells me
"bad superblock".

The 2 IDE dvdram drives in the other machines perform the task as
expected.

If I take the dvdram out of the scsi drive into the ide drives, format
it with mkfs.ext2, put it back into the scsi drive, then I see an ext2
fs
on it.

Just for clarification: They all workfine with all their speced out
capabilities
with plain Suse 9.0 out-of-the-box! (off-course with ide-scsi, kernel
2.4.21-192)

To me this looks like a problem in 2.6.2/3 with scsi connected dvdram
drives only..?
So may be the problem lies not in the cdrom stuff but in interfacing
that to the
scsi layer..?

As a remark: I noticed that /proc/sys/dev/cdrom/info doesn't report
anything
related to dvd-rw nor dvd+rw write capabilites for the ide based LG
GSA-4040B
or the Panasonic LFD-521E (dvd-rw only!). Is this intentional?

regs

td


Jens Axboe schrieb:
>
> On Tue, Mar 09 2004, Olaf Fr?czyk wrote:
> > On Sun, 2004-03-07 at 11:59, Jens Axboe wrote:
> > > On Fri, Mar 05 2004, Olaf Fr?czyk wrote:
> > > > On Fri, 2004-03-05 at 09:23, Jens Axboe wrote:
> > > > > On Thu, Mar 04 2004, Olaf Fr?czyk wrote:
> > > > > > Hi,
> > > > > > I switched to 2.6.3 from 2.4.x serie.
> > > > > > When I mount DVD-RAM it is mounted read-only:
> > > > > >
> > > > > > [root@venus olaf]# mount /dev/dvdram /mnt/dvdram
> > > > > > mount: block device /dev/dvdram is write-protected, mounting read-only
> > > > > > [root@venus olaf]#
> > > > > >
> > > > > > In 2.4 it is mounted correctly as read-write.
> > > > > >
> > > > > > Drive: Panasonic LF-201, reported in Linux as:
> > > > > > MATSHITA DVD-RAM LF-D200 A120
> > > > > >
> > > > > > SCSI controller: Adaptec 2940U2W
> > > > >
> > > > > What does cat /proc/sys/dev/cdrom/info say? Do you get any kernel
> > > > > messages in dmesg when the rw mount fails?
> > > >
> > > > I get nothing in /var/log/dmesg and in /var/log/messages
> > > > In /proc/sys/dev/cdrom/info I get:
> > > > [olaf@venus olaf]$ cat /proc/sys/dev/cdrom/info
> > > > CD-ROM information, Id: cdrom.c 3.20 2003/12/17
> > > >
> > > > drive name: sr1 sr0 hdc
> > > > drive speed: 0 16 44
> > > > drive # of slots: 1 1 1
> > > > Can close tray: 1 1 1
> > > > Can open tray: 1 1 1
> > > > Can lock tray: 1 1 1
> > > > Can change speed: 1 1 1
> > > > Can select disk: 0 0 0
> > > > Can read multisession: 1 1 1
> > > > Can read MCN: 1 1 1
> > > > Reports media changed: 1 1 1
> > > > Can play audio: 1 1 1
> > > > Can write CD-R: 0 1 1
> > > > Can write CD-RW: 0 1 1
> > > > Can read DVD: 1 0 0
> > > > Can write DVD-R: 0 0 0
> > > > Can write DVD-RAM: 1 0 0
> > > > Can read MRW: 0 0 1
> > > > Can write MRW: 0 0 1
> > > >
> > > > The one I'm mounting is /dev/scd1.
> > > > As there is capablity to write-protect DVD-RAM disk (like a 1.44"
> > > > Floppy), I think that the linux kernel interprets some message from
> > > > device in wrong way.
> > >
> > > Please repeat with this patch applied and send back the results, thanks.
> > >
> > > ===== drivers/cdrom/cdrom.c 1.48 vs edited =====
> > > --- 1.48/drivers/cdrom/cdrom.c Mon Feb 9 21:58:21 2004
> > > +++ edited/drivers/cdrom/cdrom.c Sun Mar 7 11:58:40 2004
> > > @@ -645,9 +645,12 @@
> > > {
> > > disc_information di;
> > >
> > > - if (cdrom_get_disc_info(cdi, &di))
> > > + if (cdrom_get_disc_info(cdi, &di)) {
> > > + printk("cdrom: read di failed\n");
> > > return 0;
> > > + }
> > >
> > > + printk("cdrom: erasable: %d\n", di.erasable);
> > > return di.erasable;
> > > }
> > >
> > I get:
> > cdrom: read di failed
>
> Can you try to instrument drivers/cdrom/cdrom.c:cdrom_get_disc_info()
> and find out where it fails? Change the cgc.quiet = 1 to a = 0 in there
> as well (that alone might be enough to pin point the problem).
>
> --
> Jens Axboe
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:01    [W:0.133 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site