![]() | |||||||||||||
Messages in this thread |
Kyle wrote: > hdparm /dev/hda > /dev/hda: > multcount = 16 (on) > IO_support = 1 (32-bit) > unmaskirq = 1 (on) > using_dma = 1 (on) > keepsettings = 0 (off) > readonly = 0 (off) > readahead = 256 (on) > geometry = 30401/255/63, sectors = 488397168, start = 0 > > tried with hdparm -a8192 /dev/hda, not much different > /dev/hdc same as /dev/hda > Looks fine. That's strange. Maybe reboot the system and check /proc/interrupts to see if none of them is excessive. What's your .config? Try with as less as possible IDE stuff enabled. Bas. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2005-03-22 13:00 [from the cache] ©2003-2008 | |||||||||||||