lkml.org 
[lkml]   [2004]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.2-mm1 aka "Geriatric Wombat"
    2.6.2-mm1 tombstone "Badness in kobject_get....." when booting:

    Linux version 2.6.2-mm1 (root@xxxxxxxxxxxxxxxxx) (gcc version 3.3.2
    20031022 (Red Hat Linux 3.3.2-1)) #1 SMP Thu Feb 5 11:10:16 GMT 2004
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    256MB LOWMEM available.
    found SMP MP-table at 000fb560
    hm, page 000fb000 reserved twice.
    hm, page 000fc000 reserved twice.
    hm, page 000f6000 reserved twice.
    hm, page 000f7000 reserved twice.
    On node 0 totalpages: 65536
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 61440 pages, LIFO batch:15
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.1 present.
    ACPI disabled because your bios is from 99 and too old
    You can enable it with acpi=force
    Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
    OEM ID: INTEL Product ID: 440GX APIC at: 0xFEE00000
    Processor #0 6:6 APIC version 17
    Processor #1 6:6 APIC version 17
    I/O APIC #2 Version 17 at 0xFEC00000.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Processors: 2
    Built 1 zonelists
    current: c03bdba0
    current->thread_info: c048e000
    Initializing CPU#0
    Kernel command line: ro root=/dev/hda2
    PID hash table entries: 2048 (order 11: 16384 bytes)
    Detected 400.957 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Memory: 254644k/262144k available (2359k kernel code, 6740k reserved,
    1272k data, 176k init, 0k highmem)
    Calibrating delay loop... 790.52 BogoMIPS
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040
    Enabling fast FPU save and restore... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    CPU0: Intel Celeron (Mendocino) stepping 05
    per-CPU timeslice cutoff: 366.06 usecs.
    task migration cache decay timeout: 1 msecs.
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000004
    ESR value after enabling vector: 00000000
    Booting processor 1/1 eip 2000
    Initializing CPU#1
    masked ExtINT on CPU#1
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Calibrating delay loop... 800.76 BogoMIPS
    CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040
    CPU1: Intel Celeron (Mendocino) stepping 05
    Total of 2 processors activated (1591.29 BogoMIPS).
    ENABLING IO-APIC IRQs
    Setting 2 in the phys_id_present_map
    ...changing IO-APIC physical APIC ID to 2 ... ok.
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22,
    2-23 not connected.
    ..TIMER: vector=0x31 pin1=2 pin2=0
    number of MP IRQ sources: 19.
    number of IO-APIC #2 registers: 24.
    testing the IO APIC.......................
    IO APIC #2......
    .... register #00: 02000000
    ....... : physical APIC id: 02
    ....... : Delivery Type: 0
    ....... : LTS : 0
    .... register #01: 00170011
    ....... : max redirection entries: 0017
    ....... : PRQ implemented: 0
    ....... : IO APIC version: 0011
    .... register #02: 00000000
    ....... : arbitration: 00
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 000 00 1 0 0 0 0 0 0 00
    01 001 01 0 0 0 0 0 1 1 39
    02 001 01 0 0 0 0 0 1 1 31
    03 001 01 0 0 0 0 0 1 1 41
    04 001 01 0 0 0 0 0 1 1 49
    05 001 01 0 0 0 0 0 1 1 51
    06 001 01 0 0 0 0 0 1 1 59
    07 001 01 0 0 0 0 0 1 1 61
    08 001 01 0 0 0 0 0 1 1 69
    09 000 00 1 0 0 0 0 0 0 00
    0a 000 00 1 0 0 0 0 0 0 00
    0b 000 00 1 0 0 0 0 0 0 00
    0c 001 01 0 0 0 0 0 1 1 71
    0d 001 01 0 0 0 0 0 1 1 79
    0e 001 01 0 0 0 0 0 1 1 81
    0f 001 01 0 0 0 0 0 1 1 89
    10 001 01 1 1 0 1 0 1 1 91
    11 000 00 1 0 0 0 0 0 0 00
    12 001 01 1 1 0 1 0 1 1 99
    13 001 01 1 1 0 1 0 1 1 A1
    14 000 00 1 0 0 0 0 0 0 00
    15 000 00 1 0 0 0 0 0 0 00
    16 000 00 1 0 0 0 0 0 0 00
    17 000 00 1 0 0 0 0 0 0 00
    IRQ to pin mappings:
    IRQ0 -> 0:2
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    IRQ16 -> 0:16
    IRQ18 -> 0:18
    IRQ19 -> 0:19
    .................................... done.
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 400.0830 MHz.
    ..... host bus clock speed is 66.0804 MHz.
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 1 CPUs
    zapping low mappings.
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040116
    ACPI: Interpreter disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    SCSI subsystem initialized
    ACPI: ACPI tables contain no PCI IRQ routing entries
    PCI: Invalid ACPI-PCI IRQ routing table
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI->APIC IRQ transform: (B0,I7,P3) -> 19
    PCI->APIC IRQ transform: (B0,I18,P0) -> 18
    PCI->APIC IRQ transform: (B0,I19,P0) -> 19
    PCI->APIC IRQ transform: (B0,I20,P0) -> 16
    PCI->APIC IRQ transform: (B1,I0,P0) -> 16
    Starting balanced_irq
    Total HugeTLB memory allocated, 0
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver 2.1.6 [Flags: R/O].
    udf: registering filesystem
    Initializing Cryptographic API
    Limiting direct PCI/PCI transfers.
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    isapnp: Scanning for PnP cards...
    pnp: SB audio device quirk - increasing port range
    pnp: AWE32 quirk - adding two ports
    isapnp: Card 'Creative SB AWE64 Gold'
    isapnp: 1 Plug & Play card detected total
    pty: 256 Unix98 ptys configured
    Real Time Clock Driver v1.12
    Using anticipatory io scheduler
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    loop: loaded (max 8 devices)
    Linux video capture interface: v1.00
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PIIX4: IDE controller at PCI slot 0000:00:07.1
    PIIX4: chipset revision 1
    PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    hda: QUANTUM FIREBALL SE6.4A, ATA DISK drive
    hdb: WDC AC28400R, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hdc: CREATIVEDVD5240E-1, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 12594960 sectors (6448 MB) w/80KiB Cache, CHS=13328/15/63, UDMA(33)
    hda: hda1 hda2
    hdb: max request size: 128KiB
    hdb: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=16383/16/63, UDMA(33)
    hdb: hdb1 hdb2
    hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA
    Uniform CD-ROM driver Revision: 3.20
    mice: PS/2 mouse device common for all mice
    serio: i8042 AUX port at 0x60,0x64 irq 12
    input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
    serio: i8042 KBD port at 0x60,0x64 irq 1
    input: AT Translated Set 2 keyboard on isa0060/serio0
    I2O Core - (C) Copyright 1999 Red Hat Software
    I2O: Event thread created as pid 18
    i2o: Checking for PCI I2O controllers...
    I2O configuration manager v 0.04.
    (C) Copyright 1999 Red Hat Software
    i2c /dev entries driver
    piix4-smbus 0000:00:07.3: Found 0000:00:07.3 device
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 16384 bind 16384)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 176k freed
    drivers/usb/core/usb.c: registered new driver usbfs
    drivers/usb/core/usb.c: registered new driver hub
    drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface
    driver v2.1
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: irq 19, io base 0000ef80
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    drivers/usb/core/usb.c: registered new driver hiddev
    drivers/usb/core/usb.c: registered new driver hid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    EXT3 FS on hda2, internal journal
    Adding 514040k swap on /dev/hdb1. Priority:-1 extents:1
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: Maximum main memory to use for agp memory: 204M
    agpgart: AGP aperture is 64M @ 0xf8000000
    [drm] Initialized mga 3.1.0 20021029 on minor 0: Matrox G400/G450 (AGP)
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hdb2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org>
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]
    MMIO=[febfe800-febfefff] Max Packet=[2048]
    raw1394: /dev/raw1394 device initialized
    blk: queue c1323c00, I/O limit 4095Mb (mask 0xffffffff)
    blk: queue c1323800, I/O limit 4095Mb (mask 0xffffffff)
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[090050c50000046f]
    Badness in kobject_get at lib/kobject.c:431
    Call Trace:
    [<c0239966>] kobject_get+0x36/0x40
    [<c027cc73>] get_device+0x13/0x20
    [<c027d899>] bus_for_each_dev+0x59/0xc0
    [<d0939355>] nodemgr_node_probe+0x55/0x120 [ieee1394]
    [<d0939200>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
    [<d0939748>] nodemgr_host_thread+0x168/0x190 [ieee1394]
    [<d09395e0>] nodemgr_host_thread+0x0/0x190 [ieee1394]
    [<c010ac15>] kernel_thread_helper+0x5/0x10

    Unable to handle kernel paging request at virtual address 53565755
    printing eip:
    53565755
    *pde = 00000000
    Oops: 0000 [#1]
    PREEMPT SMP
    CPU: 1
    EIP: 0060:[<53565755>] Not tainted VLI
    EFLAGS: 00010206
    EIP is at 0x53565755
    eax: 53565755 ebx: d09680c8 ecx: cf5b1f9c edx: 00000000
    esi: d0938ca0 edi: 00000000 ebp: d0937a80 esp: cf5b1f40
    ds: 007b es: 007b ss: 0068
    Process knodemgrd_0 (pid: 1116, threadinfo=cf5b0000 task=cf934c00)
    Stack: c02399f3 d09680c8 d09680a4 d09680ac d0968000 cf30c644 c027d8af
    d09680c8
    d09680a4 cf5b1f9c d09680a4 d096804c 00000000 cf30c63c cf5b1f9c
    cf08bc18
    cf5b1f9c d0939355 d0968000 cf30c63c cf5b1f9c d0939200 cefb4000
    cf08bc18
    Call Trace:
    [<c02399f3>] kobject_cleanup+0x83/0x90
    [<c027d8af>] bus_for_each_dev+0x6f/0xc0
    [<d0939355>] nodemgr_node_probe+0x55/0x120 [ieee1394]
    [<d0939200>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
    [<d0939748>] nodemgr_host_thread+0x168/0x190 [ieee1394]
    [<d09395e0>] nodemgr_host_thread+0x0/0x190 [ieee1394]
    [<c010ac15>] kernel_thread_helper+0x5/0x10

    Code: Bad EIP value.
    ip_tables: (C) 2000-2002 Netfilter core team
    e100: Intel(R) PRO/100 Network Driver, 3.0.13_dev
    e100: Copyright(c) 1999-2004 Intel Corporation
    e100: eth0: e100_probe: addr 0xfd5ff000, irq 19, MAC addr 08:00:09:DC:E1:1A
    ip_tables: (C) 2000-2002 Netfilter core team
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
    parport0: PC-style at 0x378 [PCSPP]
    parport0: cpp_daisy: aa5500ff(38)
    parport0: assign_addrs: aa5500ff(38)
    parport0: cpp_daisy: aa5500ff(38)
    parport0: assign_addrs: aa5500ff(38)
    lp0: using parport0 (polling).
    pnp: Device 00:01.00 activated.
    pnp: Device 00:01.02 activated.


    Andrew Morton wrote:
    > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.2/2.6.2-mm1/
    >
    >
    > - Merged some page reclaim fixes from Nick and Nikita. These yield some
    > performance improvements in low memory and heavy paging situations.
    >
    > - Various random fixes.
    >
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:00    [W:0.041 / U:62.276 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site