lkml.org 
[lkml]   [2004]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Network error with Intel E1000 Adapter on update 2.4.25 ==> 2.6.3
From
Date
On Fri, 2004-02-27 at 13:38, Marc-Christian Petersen wrote:
> On Friday 27 February 2004 13:22, Martin Bene wrote:
>
> Hi Martin,
>
> > When trying to update the kernel from 2.4.25 to 2.6.3 I run into a probelm:
> > While the driver for the onboard Intel E1000 network adapter loads OK, it
> > doesn't seem to find an interrupt for the interface - ifconfig shows:
> > eth0 Link encap:Ethernet HWaddr 00:0E:A6:2D:7A:64
> > BROADCAST MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> > Base address:0x9000 Memory:fc000000-fc020000
> > [ ... ripped the rest ... ]
> > Board is an Asus PC-DL, Intel 875P Chipset, one Xeon 2.8Ghz CPU, Onboard
> > e1000 Network interface. Any idea how I can get the onboard NIC to work?
>
> full output of /var/log/dmesg || dmesg after bootup might help.

e1000 is known to have problems in 2.6.3

Please try the latest 2.6.3-bk snapshot, it may work better, it has
helped at least one other reporter of e1000 problems in 2.6.3

--
/Martin
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 14:01    [W:0.043 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site