[lkml]   [2004]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: 2.6.x support for prism2 USB wireless adapter?
    The prism2_usb driver is from the linux-wlan-ng project at

    This driver driver compiles OK under 2.6.3 and loads, but the problem is
    that the device is not recognised by the USB kernel subsystem before that..

    Under 2.4.23 (and without loading the prism2_usb driver) I get the
    following output from #lsusb:
    Bus 001 Device 001: ID 0000:0000
    Bus 001 Device 002: ID 066b:2212 Linksys, Inc. WUSB11v2.5 802.11b Adapter

    Under 2.6.3 I get:
    Bus 001 Device 001: ID 0000:0000

    Robert Gadsdon

    Greg KH wrote:
    > On Mon, Feb 23, 2004 at 01:11:34AM +0000, Robert Gadsdon wrote:
    >>I had my Linksys prism2 USB wireless adapter (WUSB11 v2.5) working
    >>reasonably well with kernel 2.4.23, but with kernel 2.6.3 (and udev 018)
    >>I get:
    >>usb 1-1: new full speed USB device using address 5
    >>drivers/usb/core/config.c: invalid interface number (1/1)
    >>usb 1-1: can't read configurations, error -22
    >>#modprobe prism2_usb gives:
    >>prism2usb_init: prism2_usb.o: 0.2.1-pre20 Loaded
    >>prism2usb_init: dev_info is: prism2_usb
    >>drivers/usb/core/usb.c: registered new driver prism2_usb
    >>#lsusb does not show the device at all...
    >>Is this still 'work in progress'?
    > I don't see this driver in the kernel tree. Where did you find it?
    > thanks,
    > greg k-h

    Robert Gadsdon
    01442 872 633
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 14:01    [W:0.026 / U:2.592 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site