Messages in this thread | | | Subject | [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work | From | florian <> | Date | Mon, 06 Dec 2004 12:48:55 +0100 |
| |
Distribution: Fedora Core 3 Kernel: upgraded to 2.6.9-1.681_FC3
Hardware: Mainboard - Unknown (I think it's from Medion) Graphikcard - Ati Radeon 9100 PRO IGP Sound: ATI AC'97 Harddisk - 120 GB IDE DVD: Medion DVD-RW+/- USB 2.0
USB devices: Mouse - optical wheel mouse USB - vendor: Elta Printer - HP deskjet Scanner - Mustek 600 CU USB 4 Port Hub (only the mous is connectet with the hub)
Subject: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
Description:
My first problem ist the "USB Legacy Support" (to enable/disable in the BIOS). If this is enabled the system is going to hang. And there is only this message "Disabling IRQ #3". I can't start the "Fedora core 3" and "Fedora Core 1" installation if "Legacy Support" is enabeld. If I disable this, I can install "Fedora Core 1/3". After the installation I tryed to enable "Legacy Support" but the same problem takes affect.
In "Fedora Core 2" this problem don't exist but no USB device works. And after I updated the system ("yum update") the same problem like in FC3 is the result.
Now I'm using FC3, "Legacy Support" is disabeld. But there still exist some problems. My printer and my scanner won't work. Both devices worked correctly on my old PC with FC1.
CUPS hangs if I try to start the daemon and XSANE don't find any device.
At boottime some messages like "irq 5: nobody cared! ... please report a bug...." was displayed.
I have already tryed "acpi=off" I have build my own kernel 2.6.9 with ACPI on/off and device management for BIOS and the kernel
My Questions:
How can I enable "USB Legacy Support" without errors? How can I resolve the problem with the USB devices?
I've found via google some BIOS Bugs for "USB Legacy Support", but this bug occurs only on Windows XP (I don't found this for Linux). I tried allready to update my BIOS and now USB is disabled for all devices (Mouse, Printer, Scanner, USB-FlashMemory)
[florian@orange-bud ~]$ cat /proc/interrupts CPU0 0: 1405240 XT-PIC timer 1: 1422 XT-PIC i8042 2: 0 XT-PIC cascade 5: 100012 XT-PIC ehci_hcd, ohci_hcd, ohci_hcd 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 11: 2174 XT-PIC ATI IXP, eth0 12: 83685 XT-PIC i8042 14: 62240 XT-PIC ide0 15: 22 XT-PIC ide1 NMI: 0 ERR: 6 [florian@orange-bud ~]$
this is the output from dmesg:
this is like the message at boottime there stands IRQ 3 in the past and now (after BIOS update) IRQ 5.
irq 5: nobody cared! (screaming interrupt?) irq 5: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5
dmesg before the BIOS was updated: the current dmesg is at the bottom
Linux version 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc version3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Nov 18 15:10:10 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS) BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 446MB LOWMEM available. zapping low mappings. On node 0 totalpages: 114416 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 110320 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 FIC ) @ 0x000f6a00 ACPI: RSDT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef3000 ACPI: FADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef3040 ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/ hdc=ide-scsi rhgb quiet ide_setup: hdc=ide-scsi mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023db000 soft=023da000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2793.878 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449444k/457664k available (2084k kernel code, 7684k reserved, 651k data, 148k init, 0k highmem) Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 383k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *12 ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 3 (level, low) -> IRQ 3 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:14.2[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 11 (level, low) -> IRQ 11 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1101309616.763:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 5E743E255A7478EF - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Thermal Zone [THRM] (-127 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Unsupported Ati chipset (device id: 7833) irq 12: nobody cared! (screaming interrupt?) irq 12: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<0223aede>] (i8042_interrupt+0x0/0x251) Disabling IRQ #12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST3120026A, ATA DISK drive Probing IDE interface ide1... hdc: MEDION DVD RW DVR-MCC, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice irq 12: nobody cared! (screaming interrupt?) irq 12: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<0223aede>] (i8042_interrupt+0x0/0x251) Disabling IRQ #12 input: AT Translated Set 2 keyboard on isa0060/serio0 irq 12: nobody cared! (screaming interrupt?) irq 12: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<0223aede>] (i8042_interrupt+0x0/0x251) Disabling IRQ #12 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4bios S5) ACPI wakeup devices: PCI0 USB0 USB1 USB2 AUDO MODM P2P MAC Freeing unused kernel memory: 148k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Losing some ticks... checking if CPU frequency changed. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks spurious 8259A interrupt: IRQ7. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. inserting floppy driver for 2.6.9-1.681_FC3 FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10 divert: allocating divert_blk for eth0 eth0: RealTek RTL8139 at 0xd000, 00:40:ca:85:f7:15, IRQ 10 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 3 (level, low) -> IRQ 3 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: irq 3, pci mem 1e81c000 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 3 (level, low) -> IRQ 3 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: irq 3, pci mem 1e830000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 3 (level, low) -> IRQ 3 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: irq 3, pci mem 1e864000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ohci_hcd 0000:00:13.0: wakeup ohci_hcd 0000:00:13.1: wakeup usb 2-1: new full speed USB device using address 2 hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 3-1: new full speed USB device using address 2 usb 3-2: new full speed USB device using address 3 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb 2-1.1: new low speed USB device using address 3 input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:13.0-1.1 NET: Registered protocol family 10 Disabled Privacy Extensions on device 0236dc20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. ACPI: Power Button (FF) [PWRF] EXT3 FS on hda5, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Losing some ticks... checking if CPU frequency changed. Adding 1020088k swap on /dev/hda9. Priority:-1 extents:1 SCSI subsystem initialized ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MEDION Model: DVD RW DVR-MCC Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> microcode: CPU0 updated from revision 0x7 to 0xb, date = 05122004 Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing too many ticks! TSC cannot be used as a timesource. Possible reasons for this are: You're running with Speedstep, You don't have DMA enabled for your hard disk (see hdparm), Incorrect TSC synchronization on an SMP system (see dmesg). Falling back to a sane timesource now. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 eth0: no IPv6 routers present i2c /dev entries driver Installing knfsd (copyright (C) 1996 okir@monad.swb.de). application sox uses obsolete OSS audio interface ---------------------------------------------------------------------------------
dmesg before BIOS update: in modprobe.conf ohci_hcd is disabled - IRQ 12 (PS/2 Mouse) won't be disabled
Linux version 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc version3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Nov 18 15:10:10 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS) BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 446MB LOWMEM available. zapping low mappings. On node 0 totalpages: 114416 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 110320 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 FIC ) @ 0x000f6870 ACPI: RSDT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef3000 ACPI: FADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef3040 ACPI: MADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef6380 ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/ hdc=ide-scsi rhgb quiet ide_setup: hdc=ide-scsi mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023db000 soft=023da000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2794.523 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449444k/457664k available (2084k kernel code, 7684k reserved, 651k data, 148k init, 0k highmem) Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 383k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5 (level, low) -> IRQ 5 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1101687518.695:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 5E743E255A7478EF - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Thermal Zone [THRM] (-127 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Unsupported Ati chipset (device id: 7833) serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST3120026A, ATA DISK drive Probing IDE interface ide1... hdc: MEDION DVD RW DVR-MCC, ATAPI CD/DVD-ROM drive ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports already in use, skipping probe Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4bios S5) ACPI wakeup devices: PCI0 USB0 USB1 USB2 AUDO MODM P2P MAC UAR1 UAR2 PS2M PS2K Freeing unused kernel memory: 148k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Losing some ticks... checking if CPU frequency changed. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Losing some ticks... checking if CPU frequency changed. spurious 8259A interrupt: IRQ7. inserting floppy driver for 2.6.9-1.681_FC3 FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth0 eth0: RealTek RTL8139 at 0xd000, 00:40:ca:85:f7:15, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: BIOS handoff failed (160, 1010001) ehci_hcd 0000:00:13.2: continuing after BIOS bug... irq 5: nobody cared! (screaming interrupt?) irq 5: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 ehci_hcd 0000:00:13.2: irq 5, pci mem 1e81c000 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: irq 5, pci mem 1e830000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: irq 5, pci mem 1e864000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Losing some ticks... checking if CPU frequency changed. NET: Registered protocol family 10 Disabled Privacy Extensions on device 0236dc20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. ACPI: Power Button (FF) [PWRF] EXT3 FS on hda5, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com Losing some ticks... checking if CPU frequency changed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1020088k swap on /dev/hda9. Priority:-1 extents:1 SCSI subsystem initialized ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MEDION Model: DVD RW DVR-MCC Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 Losing some ticks... checking if CPU frequency changed. sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> microcode: CPU0 updated from revision 0x7 to 0xb, date = 05122004 Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing too many ticks! TSC cannot be used as a timesource. Possible reasons for this are: You're running with Speedstep, You don't have DMA enabled for your hard disk (see hdparm), Incorrect TSC synchronization on an SMP system (see dmesg). Falling back to a sane timesource now. ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 i2c /dev entries driver eth0: no IPv6 routers present Installing knfsd (copyright (C) 1996 okir@monad.swb.de). application sox uses obsolete OSS audio interface application xine uses obsolete OSS audio interface [root@orange-bud ~]# ------------------------------------------------------------------------------------
current dmesg:
[florian@orange-bud ~]$ dmesg Linux version 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc version3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Nov 18 15:10:10 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS) BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 446MB LOWMEM available. zapping low mappings. On node 0 totalpages: 114416 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 110320 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 FIC ) @ 0x000f6870 ACPI: RSDT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef3000 ACPI: FADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef3040 ACPI: MADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @ 0x1bef6380 ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=LABEL=/ hdc=ide-scsi rhgb quiet ide_setup: hdc=ide-scsi mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023db000 soft=023da000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2794.154 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449444k/457664k available (2084k kernel code, 7684k reserved, 651k data, 148k init, 0k highmem) Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 383k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5 (level, low) -> IRQ 5 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1102076498.583:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 5E743E255A7478EF - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Thermal Zone [THRM] (-127 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Unsupported Ati chipset (device id: 7833) serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST3120026A, ATA DISK drive Probing IDE interface ide1... hdc: MEDION DVD RW DVR-MCC, ATAPI CD/DVD-ROM drive ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports already in use, skipping probe Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4bios S5) ACPI wakeup devices: PCI0 USB0 USB1 USB2 AUDO MODM P2P MAC UAR1 UAR2 PS2M PS2K Freeing unused kernel memory: 148k freed EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing some ticks... checking if CPU frequency changed. Losing too many ticks! TSC cannot be used as a timesource. Possible reasons for this are: You're running with Speedstep, You don't have DMA enabled for your hard disk (see hdparm), Incorrect TSC synchronization on an SMP system (see dmesg). Falling back to a sane timesource now. kjournald starting. Commit interval 5 seconds EXT3-fs: hda5: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 1482218 ext3_orphan_cleanup: deleting unreferenced inode 1368622 ext3_orphan_cleanup: deleting unreferenced inode 1636111 ext3_orphan_cleanup: deleting unreferenced inode 16939 ext3_orphan_cleanup: deleting unreferenced inode 1370088 ext3_orphan_cleanup: deleting unreferenced inode 1744627 ext3_orphan_cleanup: deleting unreferenced inode 1636096 ext3_orphan_cleanup: deleting unreferenced inode 1370076 ext3_orphan_cleanup: deleting unreferenced inode 1641024 ext3_orphan_cleanup: deleting unreferenced inode 1370025 ext3_orphan_cleanup: deleting unreferenced inode 1370022 ext3_orphan_cleanup: deleting unreferenced inode 1368810 EXT3-fs: hda5: 12 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-1.681_FC3 FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth0 eth0: RealTek RTL8139 at 0xd000, 00:40:ca:85:f7:15, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: BIOS handoff failed (160, 1010001) ehci_hcd 0000:00:13.2: continuing after BIOS bug... irq 5: nobody cared! (screaming interrupt?) irq 5: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 ehci_hcd 0000:00:13.2: irq 5, pci mem 1e81c000 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: irq 5, pci mem 1e830000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: irq 5, pci mem 1e864000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET: Registered protocol family 10 Disabled Privacy Extensions on device 0236dc20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: Power Button (FF) [PWRF] EXT3 FS on hda5, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1020088k swap on /dev/hda9. Priority:-1 extents:1 SCSI subsystem initialized ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MEDION Model: DVD RW DVR-MCC Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> microcode: CPU0 updated from revision 0x7 to 0xb, date = 05122004 ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 eth0: no IPv6 routers present spurious 8259A interrupt: IRQ7. i2c /dev entries driver Installing knfsd (copyright (C) 1996 okir@monad.swb.de). application sox uses obsolete OSS audio interface [florian@orange-bud ~]$ -- florian <florian_kr@gmx.de> [unhandled content-type:application/pgp-signature] | |