lkml.org 
[lkml]   [2004]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Problems with 2.6.10
Fryderyk Mazurek wrote:
> Hello!
>
> I'm sorry, but acpi=routeirq doesn't work. But to my head came other
> thing. I noticed that I on 2.6.9 (which correct works) I have this
> part of dmesg:

Not surprised, that should be pci=routeirq, as in the original post. Do
you have preempt on?
>
> hdb: Host Protected Area detected.
> current capacity is 66055248 sectors (33820 MB)
> native capacity is 78165360 sectors (40020 MB)
> hdb: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=65531/16/63,
> UDMA(33)
>
> and on 2.6.10 I have:
>
> hdb: Host Protected Area detected.
> current capacity is 66055248 sectors (33820 MB)
> native capacity is 78165360 sectors (40020 MB)
> hdb: Host Protected Area disabled.
> hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
> UDMA(33)
>
> How see, first is 32GB (33820 MB), and second is 40GB (40020MB).
> Correct value should be 32GB, in spite that my disk is 40GB. I want
> to say, that I have a little old BIOS and my BIOS detect only 32GB,
> therefore I have limited size of my disk. And maybe kernel 2.6.10
> influence on my BIOS and force to detect 40GB, which is not
> operable, because my BIOS is too old. I think that maybe to fix it I
> should force my kernel to detect only 32GB, how on kernel 2.6.9.
> Maybe this is a BUG of new kernel?
>
> Fryderyk.
>
> ---- Wiadomość Oryginalna ----
> Od: Bill Davidsen <davidsen@tmr.com>
> Do: Fryderyk Mazurek <dedyk@go2.pl>
> Kopia do: Len Brown <len.brown@intel.com>, linux-kernel@vger.kernel.org
> Data: Wed, 29 Dec 2004 21:14:02 -0500
> Temat: Re: Problems with 2.6.10
>
>
>>Fryderyk Mazurek wrote:
>>
>>>Hello.
>>>
>>>My kernel 2.6.10 I compiled two times. First with ACPI and second
>>>fully without ACPI. And the same situation.
>>>For me this situation is strange, because usually reset should help,
>>>but not this time. I thought that maybe my BIOS is too old. But with
>>>2.6.9 works. Therefore I don't know. Now I use 2.6.9.
>>>
>>>Fryderyk.
>>>
>>>---- Wiadomość Oryginalna ----
>>>Od: Len Brown <len.brown@intel.com>
>>>Do: Fryderyk Mazurek <dedyk@go2.pl>
>>>Kopia do: linux-kernel@vger.kernel.org
>>>Data: 27 Dec 2004 21:44:11 -0500
>>>Temat: Re: Problems with 2.6.10
>>>
>>>
>>>
>>>>On Mon, 2004-12-27 at 12:11, Fryderyk Mazurek wrote:
>>>>
>>>>
>>>>
>>>>>problem starts when I do reboot. On boot screen my bios can't
>
> detect
>
>>>>>my disk. Bios stops and nothing.
>>>>
>>>>Does reboot work if the initial boot is with acpi=off?
>>
>>With that system, perhaps acpi=ht would be better if he uses the
>
> HT. And
>
>>pci=routeirq may help as well, although it told me it was disabling
>>IRQ18 and didn't!


--
bill davidsen <davidsen@tmr.com>
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:09    [W:0.112 / U:0.296 seconds]
©2003-2011 Jasper Spaans. Advertise on this site