Messages in this thread | | | From | Gene Heskett <> | Subject | Re: Ho ho ho - Linux v2.6.10 (module strangeness) | Date | Sun, 26 Dec 2004 11:14:13 -0500 |
| |
On Sunday 26 December 2004 06:48, Chris Rankin wrote: >I'm also seeing "unresolved symbols" messages (with >ohci1394), but the modules are present and do load. > >The eth1394 module was also managing to grab "eth0" >from e1000, despite this line in my modprobe.conf >file: > >install eth1394 { /sbin/modprobe e1000; /sbin/modprobe >--ignore-install eth1394; } > >I had to blacklist the eth1394 module so that the >hot-plugging would ignore it. > >"pci=routeirq" was used because my radeon DRM module >wouldn't behave without it. > >And the ttyS0 and ttyS1 ports are being reported twice >by the serial code. Very strange. > >Cheers, >Chris
I can confirm this last item, except its 3 times here on this box, from my /var/log/dmesg: ----------------------- Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ------------------------
And I note this just above that: ------------------------ vesafb: probe of vesafb0 failed with error -6 ------------------------ The video card is an agp, Radeon 9200 SE, 128 megs ram. Is its vesa broken? An append to the kernel line in grub.conf of vga=791 gets a blank screen till I log in blind and do a startx.
>---------------------------------------------------- > >Linux version 2.6.10 (chris@volcano.underworld) (gcc >version 3.4.3) #1 SMP Sun Dec 26 00:02:33 GMT 2004 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 >(usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 >(reserved) > BIOS-e820: 0000000000100000 - 000000003ff75000 >(usable) > BIOS-e820: 000000003ff75000 - 000000003ff77000 (ACPI >NVS) > BIOS-e820: 000000003ff77000 - 000000003ff98000 (ACPI >data) > BIOS-e820: 000000003ff98000 - 0000000040000000 >(reserved) > BIOS-e820: 00000000fec00000 - 00000000fec90000 >(reserved) > BIOS-e820: 00000000fee00000 - 00000000fee10000 >(reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 >(reserved) >127MB HIGHMEM available. >896MB LOWMEM available. >found SMP MP-table at 000fe710 >On node 0 totalpages: 262005 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 225280 pages, LIFO batch:16 > HighMem zone: 32629 pages, LIFO batch:7 >DMI 2.3 present. >ACPI: RSDP (v000 DELL >) @ 0x000febc0 >ACPI: RSDT (v001 DELL WS 650 0x00000008 ASL >0x00000061) @ 0x000fd4d4 >ACPI: FADT (v001 DELL WS 650 0x00000008 ASL >0x00000061) @ 0x000fd50c >ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT >0x0100000d) @ 0xffff373d >ACPI: MADT (v001 DELL WS 650 0x00000008 ASL >0x00000061) @ 0x000fd580 >ACPI: BOOT (v001 DELL WS 650 0x00000008 ASL >0x00000061) @ 0x000fd604 >ACPI: ASF! (v016 DELL WS 650 0x00000008 ASL >0x00000061) @ 0x000fd62c >ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT >0x0100000d) @ 0x00000000 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >Processor #0 15:2 APIC version 20 >ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) >Processor #6 15:2 APIC version 20 >ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >Processor #1 15:2 APIC version 20 >ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) >Processor #7 15:2 APIC version 20 >ACPI: IOAPIC (id[0x08] address[0xfec00000] >gsi_base[0]) >IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, >GSI 0-23 >ACPI: IOAPIC (id[0x09] address[0xfec80000] >gsi_base[24]) >IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, >GSI 24-47 >ACPI: IOAPIC (id[0x0a] address[0xfec80800] >gsi_base[48]) >IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, >GSI 48-71 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl >dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Enabling APIC mode: Flat. Using 3 I/O APICs >Using ACPI (MADT) for SMP configuration information >Built 1 zonelists >Kernel command line: ro root=LABEL=/ nmi_watchdog=1 >pci=routeirq console=ttyS0,115200n8 console=tty0 >mapped APIC to ffffd000 (fee00000) >mapped IOAPIC to ffffc000 (fec00000) >mapped IOAPIC to ffffb000 (fec80000) >mapped IOAPIC to ffffa000 (fec80800) >Initializing CPU#0 >CPU 0 irqstacks, hard=c0356000 soft=c034e000 >PID hash table entries: 4096 (order: 12, 65536 bytes) >Detected 2659.014 MHz processor. >Using tsc for high-res timesource >Console: colour VGA+ 80x25 >Dentry cache hash table entries: 131072 (order: 7, >524288 bytes) >Inode-cache hash table entries: 65536 (order: 6, >262144 bytes) >Memory: 1034968k/1048020k available (1466k kernel >code, 12384k reserved, 693k data, 176k init, 130516k >highmem) >Checking if this processor honours the WP bit even in >supervisor mode... Ok. >Calibrating delay loop... 5242.88 BogoMIPS >(lpj=2621440) >Mount-cache hash table entries: 512 (order: 0, 4096 >bytes) >CPU: After generic identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 >00000000 00000080 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU0: Intel P4/Xeon Extended MCE MSRs (12) available >CPU0: Thermal monitoring enabled >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Checking 'hlt' instruction... OK. >CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09 >per-CPU timeslice cutoff: 1462.47 usecs. >task migration cache decay timeout: 2 msecs. >Booting processor 1/1 eip 3000 >CPU 1 irqstacks, hard=c0357000 soft=c034f000 >Initializing CPU#1 >Calibrating delay loop... 5308.41 BogoMIPS >(lpj=2654208) >CPU: After generic identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 >00000000 00000080 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#1. >CPU1: Intel P4/Xeon Extended MCE MSRs (12) available >CPU1: Thermal monitoring enabled >CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09 >Booting processor 2/6 eip 3000 >CPU 2 irqstacks, hard=c0358000 soft=c0350000 >Initializing CPU#2 >Calibrating delay loop... 5308.41 BogoMIPS >(lpj=2654208) >CPU: After generic identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 3 >CPU: After all inits, caps: bfebfbff 00000000 >00000000 00000080 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#2. >CPU2: Intel P4/Xeon Extended MCE MSRs (12) available >CPU2: Thermal monitoring enabled >CPU2: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09 >Booting processor 3/7 eip 3000 >CPU 3 irqstacks, hard=c0359000 soft=c0351000 >Initializing CPU#3 >Calibrating delay loop... 5308.41 BogoMIPS >(lpj=2654208) >CPU: After generic identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 >00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 3 >CPU: After all inits, caps: bfebfbff 00000000 >00000000 00000080 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#3. >CPU3: Intel P4/Xeon Extended MCE MSRs (12) available >CPU3: Thermal monitoring enabled >CPU3: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09 >Total of 4 processors activated (21168.12 BogoMIPS). >ENABLING IO-APIC IRQs >..TIMER: vector=0x31 pin1=2 pin2=-1 >testing NMI watchdog ... OK. >checking TSC synchronization across 4 CPUs: passed. >Brought up 4 CPUs >CPU0: > domain 0: span 03 > groups: 01 02 > domain 1: span 0f > groups: 03 0c >CPU1: > domain 0: span 03 > groups: 02 01 > domain 1: span 0f > groups: 03 0c >CPU2: > domain 0: span 0c > groups: 04 08 > domain 1: span 0f > groups: 0c 03 >CPU3: > domain 0: span 0c > groups: 08 04 > domain 1: span 0f > groups: 0c 03 >checking if image is initramfs...it isn't (no cpio >magic); looks like an initrd >Freeing initrd memory: 407k freed >NET: Registered protocol family 16 >PCI: PCI BIOS revision 2.10 entry at 0xfbdd5, last >bus=5 >PCI: Using configuration type 1 >mtrr: v2.0 (20020519) >ACPI: Subsystem revision 20041105 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (00:00) >PCI: Probing PCI hardware (bus 00) >PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 >PCI: Transparent bridge - 0000:00:1e.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table >[\_SB_.PCI0.PCI1._PRT] >ACPI: PCI Interrupt Routing Table >[\_SB_.PCI0.PCI1.PCI2._PRT] >ACPI: PCI Interrupt Routing Table >[\_SB_.PCI0.PCI1.PCI3._PRT] >ACPI: PCI Interrupt Routing Table >[\_SB_.PCI0.PCI4._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 >*11 12 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 >*11 12 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 >11 12 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 >11 12 15) >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 >*11 12 15) >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 >*11 12 15) >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 >*11 12 15) >ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 >*11 12 15) >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >pnp: PnP ACPI: found 12 devices >PCI: Using ACPI for IRQ routing >** Routing PCI interrupts for all devices because >"pci=routeirq" >** was specified. If this was required to make a >driver work, >** please email the output of "lspci" to >bjorn.helgaas@hp.com >** so I can fix the driver. >ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, >low) -> IRQ 16 >ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, >low) -> IRQ 19 >ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, >low) -> IRQ 18 >ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, >low) -> IRQ 23 >ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, >low) -> IRQ 18 >ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, >low) -> IRQ 17 >ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, >low) -> IRQ 17 >ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, >low) -> IRQ 16 >ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 24 (level, >low) -> IRQ 24 >ACPI: PCI interrupt 0000:05:0c.0[A] -> GSI 20 (level, >low) -> IRQ 20 >ACPI: PCI interrupt 0000:05:0d.0[A] -> GSI 21 (level, >low) -> IRQ 21 >ACPI: PCI interrupt 0000:05:0d.2[B] -> GSI 22 (level, >low) -> IRQ 22 >pnp: 00:0b: ioport range 0x800-0x85f could not be >reserved >pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved >pnp: 00:0b: ioport range 0x860-0x8ff could not be >reserved >Simple Boot Flag at 0x7a set to 0x80 >Machine check exception polling timer started. >highmem bounce pool size: 64 pages >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 1024 (order 0, 4096 >bytes) >Initializing Cryptographic API >Real Time Clock Driver v1.12 >serio: i8042 AUX port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, >IRQ sharing enabled >ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >io scheduler noop registered >io scheduler cfq registered >elevator: using cfq as default io scheduler >Floppy drive(s): fd0 is 1.44M >FDC 0 is a post-1991 82077 >RAMDISK driver initialized: 16 RAM disks of 4096K size >1024 blocksize >Uniform Multi-Platform E-IDE driver Revision: >7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; >override with idebus=xx >ICH4: IDE controller at PCI slot 0000:00:1f.1 >PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) >ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, >low) -> IRQ 18 >ICH4: chipset revision 1 >ICH4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: >hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: >hdc:DMA, hdd:DMA >Probing IDE interface ide0... >hda: IC35L090AVV207-0, ATA DISK drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive >hdd: SONY CD-RW CRX216E, ATAPI CD/DVD-ROM drive >ide1 at 0x170-0x177,0x376 on irq 15 >hda: max request size: 1024KiB >hda: 156250000 sectors (80000 MB) w/1821KiB Cache, >CHS=16383/255/63, UDMA(100) >hda: cache flushes supported > hda: hda1 hda2 hda3 hda4 < hda5 hda6 > >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard on isa0060/serio0 >device-mapper: 4.3.0-ioctl (2004-09-30) initialised: >dm-devel@redhat.com >NET: Registered protocol family 2 >IP: routing cache hash table of 8192 buckets, 64Kbytes >TCP: Hash tables configured (established 262144 bind >65536) >NET: Registered protocol family 1 >Starting balanced_irq >ACPI wakeup devices: >VBTN PCI0 USB0 USB1 USB2 PCI1 PCI2 PCI3 PCI4 KBD >ACPI: (supports S0 S1 S3 S4 S5) >RAMDISK: Compressed image found at block 0 >VFS: Mounted root (ext2 filesystem). >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >Freeing unused kernel memory: 176k freed >EXT3 FS on hda5, internal journal >Adding 2040212k swap on /dev/hda6. Priority:-1 >extents:1 >kjournald starting. Commit interval 5 seconds >EXT3 FS on hda3, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 >hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, >UDMA(33) >IA-32 Microcode Update Driver: v1.14 ><tigran@veritas.com> >microcode: CPU2 updated from revision 0xf to 0x2d, >date = 08112004 >microcode: CPU1 updated from revision 0xf to 0x2d, >date = 08112004 >microcode: CPU3 updated from revision 0xf to 0x2d, >date = 08112004 >microcode: CPU0 updated from revision 0xf to 0x2d, >date = 08112004 >Linux agpgart interface v0.100 (c) Dave Jones >agpgart: Detected an Intel E7505 Chipset. >agpgart: Maximum main memory to use for agp memory: >941M >agpgart: AGP aperture is 128M @ 0xe0000000 >usbcore: registered new driver usbfs >usbcore: registered new driver hub >USB Universal Host Controller Interface driver v2.2 >ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, >low) -> IRQ 16 >uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM >(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 >PCI: Setting latency timer of device 0000:00:1d.0 to >64 >uhci_hcd 0000:00:1d.0: irq 16, io base 0xff80 >uhci_hcd 0000:00:1d.0: new USB bus registered, >assigned bus number 1 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, >low) -> IRQ 19 >uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM >(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 >PCI: Setting latency timer of device 0000:00:1d.1 to >64 >uhci_hcd 0000:00:1d.1: irq 19, io base 0xff60 >uhci_hcd 0000:00:1d.1: new USB bus registered, >assigned bus number 2 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, >low) -> IRQ 18 >uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM >(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 >PCI: Setting latency timer of device 0000:00:1d.2 to >64 >uhci_hcd 0000:00:1d.2: irq 18, io base 0xff40 >uhci_hcd 0000:00:1d.2: new USB bus registered, >assigned bus number 3 >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >usb 2-1: new full speed USB device using uhci_hcd and >address 2 >Linux video capture interface: v1.00 >pwc Philips webcam module version 10.0.5-unofficial >loaded. >pwc Supports Philips PCA645/646, PCVC675/680/690, >PCVC720[40]/730/740/750 & PCVC830/840. >pwc Also supports the Askey VC010, various Logitech >Quickcams, Samsung MPC-C10 and MPC-C30, >pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye >and Visionite VCS-UC300 and VCS-UM100. >pwc Default image size set to qcif [176x144]. >pwc Enabling power save on open/close. >pwc Logitech QuickCam Zoom (new model) USB webcam >detected. >pwc Registered as /dev/video0. >usbcore: registered new driver Philips webcam >ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, >low) -> IRQ 23 >ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM >(ICH4/ICH4-M) USB 2.0 EHCI Controller >PCI: Setting latency timer of device 0000:00:1d.7 to >64 >ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xffa20800 >ehci_hcd 0000:00:1d.7: new USB bus registered, >assigned bus number 4 >PCI: cache line size of 128 is not supported by device >0000:00:1d.7 >ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, >driver 26 Oct 2004 >usbcore: registered new driver snd-usb-audio >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 6 ports detected >usb 2-1: USB disconnect, address 2 >ieee1394: Initialized config rom entry `ip1394' >ohci1394: Unknown symbol hpsb_iso_wake >ohci1394: Unknown symbol hpsb_packet_received >ohci1394: Unknown symbol dma_prog_region_free >ohci1394: Unknown symbol hpsb_add_host >ohci1394: Unknown symbol dma_region_sync_for_device >ohci1394: Unknown symbol dma_prog_region_init >ohci1394: Unknown symbol dma_prog_region_alloc >ohci1394: Unknown symbol dma_region_offset_to_bus >ohci1394: Unknown symbol hpsb_alloc_host >ohci1394: Unknown symbol hpsb_selfid_complete >ohci1394: Unknown symbol hpsb_remove_host >ohci1394: Unknown symbol hpsb_iso_packet_received >ohci1394: Unknown symbol hpsb_iso_packet_sent >ohci1394: Unknown symbol hpsb_packet_sent >ohci1394: Unknown symbol dma_region_sync_for_cpu >ohci1394: Unknown symbol hpsb_selfid_received >ohci1394: Unknown symbol hpsb_bus_reset >ohci1394: Unknown symbol hpsb_iso_wake >ohci1394: Unknown symbol hpsb_packet_received >ohci1394: Unknown symbol dma_prog_region_free >ohci1394: Unknown symbol hpsb_add_host >usb 2-1: new full speed USB device using uhci_hcd and >address 3 >ohci1394: Unknown symbol dma_region_sync_for_device >ohci1394: Unknown symbol dma_prog_region_init >ohci1394: Unknown symbol dma_prog_region_alloc >ohci1394: Unknown symbol dma_region_offset_to_bus >ohci1394: Unknown symbol hpsb_alloc_host >ohci1394: Unknown symbol hpsb_selfid_complete >ohci1394: Unknown symbol hpsb_remove_host >ohci1394: Unknown symbol hpsb_iso_packet_received >ohci1394: Unknown symbol hpsb_iso_packet_sent >ohci1394: Unknown symbol hpsb_packet_sent >ohci1394: Unknown symbol dma_region_sync_for_cpu >ohci1394: Unknown symbol hpsb_selfid_received >ohci1394: Unknown symbol hpsb_bus_reset >ohci1394: $Rev: 1223 $ Ben Collins ><bcollins@debian.org> >ACPI: PCI interrupt 0000:05:0c.0[A] -> GSI 20 (level, >low) -> IRQ 20 >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] >MMIO=[ff2ff800-ff2fffff] Max Packet=[2048] >ACPI: PCI interrupt 0000:05:0d.2[B] -> GSI 22 (level, >low) -> IRQ 22 >ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[22] >MMIO=[ff2ff000-ff2ff7ff] Max Packet=[2048] >pwc Logitech QuickCam Zoom (new model) USB webcam >detected. >pwc Registered as /dev/video0. >ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, >low) -> IRQ 17 >PCI: Setting latency timer of device 0000:00:1f.5 to >64 >intel8x0_measure_ac97_clock: measured 50031 usecs >intel8x0: clocking to 48000 >usb 2-1: khubd timed out on ep0out >ieee1394: Node added: ID:BUS[0-00:1023] >GUID[0050c500001076df] >ieee1394: Host added: ID:BUS[0-01:1023] >GUID[84ffffffffffff00] >ieee1394: unsolicited response packet received - no >tlabel match >usb 2-1: khubd timed out on ep0in >ieee1394: raw1394: /dev/raw1394 device initialized >video1394: Installed video1394 module >ieee1394: Host added: ID:BUS[1-00:1023] >GUID[00023c00a1037111] >Intel(R) PRO/1000 Network Driver - version >5.5.4-k2-NAPI >Copyright (c) 1999-2004 Intel Corporation. >ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 24 (level, >low) -> IRQ 24 >e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network >Connection >ACPI: PCI interrupt 0000:05:0d.0[A] -> GSI 21 (level, >low) -> IRQ 21 >parport_pc: Ignoring new-style parameters in presence >of obsolete ones >parport: PnPBIOS parport detected. >parport0: PC-style at 0x378 (0x778), irq 7, dma 1 >[PCSPP,TRISTATE,COMPAT,ECP,DMA] >ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller >(OHCI) Driver (PCI) >NET: Registered protocol family 17 >e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps >Full Duplex >nfs warning: mount version older than kernel >SCSI subsystem initialized >NET: Registered protocol family 10 >Disabled Privacy Extensions on device c02eb2a0(lo) >IPv6 over IPv4 tunneling driver >Installing knfsd (copyright (C) 1996 >okir@monad.swb.de). >lp0: using parport0 (interrupt-driven). >/home/chris/LINUX/linux-2.6.10/drivers/usb/serial/usb-serial.c: >USB Serial support registered for Generic >usbcore: registered new driver usbserial_generic >usbcore: registered new driver usbserial >/home/chris/LINUX/linux-2.6.10/drivers/usb/serial/usb-serial.c: >USB Serial Driver core v2.0 >IA-32 Microcode Update Driver v1.14 unregistered >p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock >Modulation available >input: PC Speaker >input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 >ACPI: Power Button (FF) [PWRF] >NET: Registered protocol family 15 >radeon: Ignoring new-style parameters in presence of >obsolete ones >[drm] Initialized radeon 1.13.0 20041207 on minor 0: >ATI Technologies Inc RV280 [Radeon 9200] >ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, >low) -> IRQ 16 >agpgart: Found an AGP 3.0 compliant device at >0000:00:00.0. >agpgart: X passes broken AGP3 flags (1f00420f). Fixed. >agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x >mode >agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x >mode >pwc Failed to restore power to the camera! (-32) >pwc Failed to set LED on/off time. >pwc set_video_mode(176x144 @ 10, palette 15). >pwc decode_size = 1. >pwc Using alternate setting 1. >[drm] Loading R200 Microcode >mask: 0000000000000001 usage: 0000000000000000 >video1394_0: Iso receive DMA: 10 buffers of size >155648 allocated for a frame size 153600, each with 39 >prgs >video1394_0: iso context 0 listen on channel 0 >video1394_0: Iso context 0 stop talking on channel 0 >pwc set_video_mode(160x120 @ 10, palette 15). >pwc decode_size = 1. >pwc Using alternate setting 1. >pwc set_video_mode(160x120 @ 10, palette 15). >pwc decode_size = 1. >pwc Using alternate setting 1. > >-------------------------------------------------------------------- >---- > >Module Size Used by >snd_pcm_oss 46752 0 >snd_mixer_oss 17024 1 snd_pcm_oss >radeon 127520 2 >i2c_algo_bit 9224 1 radeon >emu10k1_gp 3712 0 >gameport 4480 1 emu10k1_gp >snd_rtctimer 3344 0 >deflate 3712 0 >zlib_deflate 22040 1 deflate >zlib_inflate 17664 1 deflate >twofish 38784 0 >serpent 15616 0 >aes_i586 38772 0 >blowfish 9088 0 >des 12544 0 >sha256 9984 0 >crypto_null 2944 0 >af_key 28048 2 >binfmt_misc 9864 1 >eeprom 6680 0 >i2c_sensor 3840 1 eeprom >button 5904 0 >processor 16512 0 >psmouse 19080 0 >pcspkr 4300 0 >p4_clockmod 5412 2 >speedstep_lib 4096 1 p4_clockmod >usbserial 25576 0 >lp 9736 0 >nfsd 191264 9 >exportfs 5760 1 nfsd >md5 4736 1 >ipv6 223488 20 >sd_mod 13184 0 >scsi_mod 98944 1 sd_mod >autofs 13440 0 >nfs 186212 1 >lockd 58280 3 nfsd,nfs >sunrpc 125284 21 nfsd,nfs,lockd >af_packet 17160 0 >ohci_hcd 19720 0 >parport_pc 37828 1 >parport 31304 2 lp,parport_pc >snd_emu10k1 86916 0 >snd_util_mem 4224 1 snd_emu10k1 >snd_hwdep 8224 1 snd_emu10k1 >e1000 79540 0 >video1394 15820 0 >raw1394 25196 0 >snd_intel8x0 27936 0 >snd_ac97_codec 67936 2 >snd_emu10k1,snd_intel8x0 >i2c_i801 8204 0 >i2c_core 18176 4 >i2c_algo_bit,eeprom,i2c_sensor,i2c_i801 >ohci1394 30084 1 video1394 >ieee1394 289464 3 >video1394,raw1394,ohci1394 >ehci_hcd 27652 0 >snd_usb_audio 60864 0 >snd_pcm 79364 5 >snd_pcm_oss,snd_emu10k1,snd_intel8x0,snd_ac97_codec,snd_usb_audio >snd_timer 21252 3 >snd_rtctimer,snd_emu10k1,snd_pcm >snd_page_alloc 8196 3 >snd_emu10k1,snd_intel8x0,snd_pcm >snd_usb_lib 11776 1 snd_usb_audio >snd_rawmidi 20256 2 >snd_emu10k1,snd_usb_lib >snd_seq_device 7820 2 >snd_emu10k1,snd_rawmidi >snd 45028 13 >snd_pcm_oss,snd_mixer_oss,snd_rtctimer,snd_emu10k1,snd_hwdep,snd_int >el8x0,snd_ac97_codec,snd_usb_audio,snd_pcm,snd_timer,snd_usb_lib,snd >_rawmidi,snd_seq_device soundcore 7904 1 snd >pwc 78448 0 >videodev 8192 1 pwc >uhci_hcd 29200 0 >usbcore 99704 8 >usbserial,ohci_hcd,ehci_hcd,snd_usb_audio,snd_usb_lib,pwc,uhci_hcd >intel_agp 18972 1 >agpgart 27308 1 intel_agp >ide_cd 36100 0 >cdrom 36252 1 ide_cd >ext3 113800 2 >jbd 52888 1 ext3 > > > > > > >___________________________________________________________ >ALL-NEW Yahoo! Messenger - all new features - even more fun! > http://uk.messenger.yahoo.com - >To unsubscribe from this list: send the line "unsubscribe > linux-kernel" in the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html >Please read the FAQ at http://www.tux.org/lkml/
-- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.30% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attorneys please note, additions to this message by Gene Heskett are: Copyright 2004 by Maurice Eugene Heskett, all rights reserved. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |