Messages in this thread |  | | | Date | Fri, 24 Dec 2004 18:29:42 +0000 | | From | mp@aktivix ... | | Subject | IRQ disabling, irqpoll don't help |
| |
hi,
i get similar output as reported here recently: http://lkml.org/lkml/2004/12/6/75
thought this might help (pls CC mp [at] aktivix dot org) if replying)
using 2.6.9-1.681_FC3 (laptop, all updated with apt freshrpms):
dmesg <snip>
hub 4-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: IRQ 0 for device 0000:00:0b.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Please try using pci=biosirq. Yenta: CardBus bridge found at 0000:00:0b.0 [1734:1032] irq 3: nobody cared! (screaming interrupt?) irq 3: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<0228080f>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #3 <end> or different boot attempt:
<snip> hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Yenta: CardBus bridge found at 0000:00:0b.0 [1734:1032] irq 3: nobody cared! (screaming interrupt?) irq 3: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #3 <end> or:
dmesg <snip> vesafb: probe of vesafb0 failed with error -6 ide2: Wait for ready failed before probe ! ide3: Wait for ready failed before probe ! ide4: Wait for ready failed before probe ! ide5: Wait for ready failed before probe ! cdrom: open failed. <end>
have tried more boot option combinations of apci=off | irc=usepirqmask | pci=bioirq etc. according to the various output recommendations than i care to/can recount... using irqpoll causes a consistent hang up in boot, as does irqnodebug Prior to this state, btw, there was a consistent "hdc: lost interrupt: drive appears confused", which seems to have been 'solved' by disabling HAL..... cheers, mp [root@maz ~]# dmesg|less|grep BIOS BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1 apm: BIOS not found. ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio[mp@maz ~]$ dmesg Linux version 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Nov 18 15:10:10 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 1023MB LOWMEM available. zapping low mappings. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 258032 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Built 1 zonelists Kernel command line: ro root=LABEL=/ acpi=off pci=usepirqmask pci=biosirq mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023db000 soft=023da000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1995.050 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1034276k/1048512k available (2084k kernel code, 13516k reserved, 651k data, 148k init, 0k highmem) Calibrating delay loop... 3932.16 BogoMIPS (lpj=1966080) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383f1ff c1cbf9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon(tm) XP 2600+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 383k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/3177] at 0000:00:11.0 PCI: Hardcoded IRQ 14 for device 0000:00:11.1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1103910238.289:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 5E743E255A7478EF - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xe0000000 i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 PCI: Hardcoded IRQ 14 for device 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: FUJITSU MHT2040AT, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: DVD+RW RW8160, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 4.1 Sensor: 8 new absolute packet format input: SynPS/2 Synaptics TouchPad on isa0060/serio2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 37449) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: SGTC: 13333 powernow: Minimum speed 1396 MHz. Maximum speed 1995 MHz. Freeing unused kernel memory: 148k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-1.681_FC3 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker divert: allocating divert_blk for eth0 eth0: VIA Rhine II at 0xdffff600, 00:03:0d:07:e0:19, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021. via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. PCI: Setting latency timer of device 0000:00:11.5 to 64 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: irq 10, pci mem 42836700 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 11, io base 0000e000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 3, io base 0000e400 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 5, io base 0000e800 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Yenta: CardBus bridge found at 0000:00:0b.0 [1734:1032] irq 3: nobody cared! (screaming interrupt?) irq 3: Please try booting with acpi=off and report a bug Stack pointer is garbage, not printing trace handlers: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #3 Yenta: ISA IRQ mask 0x0290, PCI irq 0 Socket status: 30000006 ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[dffff800-dfffffff] Max Packet=[2048] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on hda5, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d49755510d7] cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8191 buckets, 65528 max) - 356 bytes per conntrack eth0: link up, 10Mbps, half-duplex, lpa 0x0021 i2c /dev entries driver parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready NET: Registered protocol family 10 Disabled Privacy Extensions on device 0236dc20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present [drm] Initialized radeon 1.11.0 20020828 on minor 0: agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Loading R200 Microcode spurious 8259A interrupt: IRQ7. psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 4 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 4 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio2/input0 - driver resynched.[root@maz ~]# lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 00:0b.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller (rev 20) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01)[root@maz ~]# procinfo Linux 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc 3.4.2 20041017 ) #1 Thu Nov 18 15:10:10 EST 2004 1CPU [maz]
Memory: Total Used Free Shared Buffers Mem: 1035140 483028 552112 0 20500 Swap: 1052216 0 1052216
Bootup: Fri Dec 24 17:43:54 2004 Load average: 0.05 0.07 0.08 1/103 3059
user : 0:01:10.58 3.5% page in : 0 nice : 0:00:00.86 0.0% page out: 0 system: 0:00:25.78 1.3% swap in : 0 idle : 0:31:43.85 95.1% swap out: 0 uptime: 0:33:22.14 context : 726064
irq 0: 2001406 timer irq 8: 1 rtc irq 1: 4314 i8042 irq 9: 1 irq 2: 0 cascade [4] irq 10: 2 ehci_hcd, ohci1394 irq 3: 100000 uhci_hcd irq 11: 118733 uhci_hcd, eth0, rade irq 4: 1 irq 12: 295557 i8042 irq 5: 2038 VIA8233, uhci_hcd irq 14: 16818 ide0 irq 7: 21 irq 15: 18 ide1
|  |