lkml.org 
[lkml]   [2004]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] I2C update for 2.6.10-rc1
Date
From
ChangeSet 1.2014.1.14, 2004/11/08 16:33:52-08:00, greg@kroah.com

I2C: remove probe_range from I2C sensor drivers, as it's not used.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


drivers/i2c/chips/pc87360.c | 2 --
drivers/i2c/chips/smsc47m1.c | 2 --
drivers/i2c/i2c-sensor-detect.c | 9 ---------
include/linux/i2c-sensor.h | 11 -----------
4 files changed, 24 deletions(-)

diff -Nru a/drivers/i2c/chips/pc87360.c b/drivers/i2c/chips/pc87360.c
--- a/drivers/i2c/chips/pc87360.c 2004-11-08 18:55:16 -08:00
+++ b/drivers/i2c/chips/pc87360.c 2004-11-08 18:55:16 -08:00
@@ -57,8 +57,6 @@
.normal_i2c_range = normal_i2c_range,
.normal_isa = normal_isa,
.normal_isa_range = normal_isa_range,
- .probe = normal_i2c, /* cheat */
- .probe_range = normal_i2c_range, /* cheat */
.ignore = normal_i2c, /* cheat */
.ignore_range = normal_i2c_range, /* cheat */
.forces = forces,
diff -Nru a/drivers/i2c/chips/smsc47m1.c b/drivers/i2c/chips/smsc47m1.c
--- a/drivers/i2c/chips/smsc47m1.c 2004-11-08 18:55:16 -08:00
+++ b/drivers/i2c/chips/smsc47m1.c 2004-11-08 18:55:16 -08:00
@@ -46,8 +46,6 @@
.normal_i2c_range = normal_i2c_range,
.normal_isa = normal_isa,
.normal_isa_range = normal_isa_range,
- .probe = normal_i2c, /* cheat */
- .probe_range = normal_i2c_range, /* cheat */
.ignore = normal_i2c, /* cheat */
.ignore_range = normal_i2c_range, /* cheat */
.forces = forces,
diff -Nru a/drivers/i2c/i2c-sensor-detect.c b/drivers/i2c/i2c-sensor-detect.c
--- a/drivers/i2c/i2c-sensor-detect.c 2004-11-08 18:55:16 -08:00
+++ b/drivers/i2c/i2c-sensor-detect.c 2004-11-08 18:55:16 -08:00
@@ -138,15 +138,6 @@
found = 1;
}
}
- for (i = 0; !found && (address_data->probe_range[i] != I2C_CLIENT_END); i += 3) {
- if ( ((adapter_id == address_data->probe_range[i]) ||
- ((address_data->probe_range[i] == ANY_I2C_BUS) && !is_isa)) &&
- (addr >= address_data->probe_range[i + 1]) &&
- (addr <= address_data->probe_range[i + 2])) {
- found = 1;
- dev_dbg(&adapter->dev, "found probe_range parameter for adapter %d, addr %04x\n", adapter_id, addr);
- }
- }
if (!found)
continue;

diff -Nru a/include/linux/i2c-sensor.h b/include/linux/i2c-sensor.h
--- a/include/linux/i2c-sensor.h 2004-11-08 18:55:16 -08:00
+++ b/include/linux/i2c-sensor.h 2004-11-08 18:55:16 -08:00
@@ -58,12 +58,6 @@
A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the address. These
addresses are also probed, as if they were in the 'normal' list.
- probe_range: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END
- values.
- A list of triples. The first value is a bus number (ANY_I2C_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second and third are addresses.
- These form an inclusive range of addresses that are also probed, as
- if they were in the 'normal' list.
ignore: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values.
A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the I2C address. These
@@ -84,7 +78,6 @@
unsigned int *normal_isa;
unsigned int *normal_isa_range;
unsigned short *probe;
- unsigned short *probe_range;
unsigned short *ignore;
unsigned short *ignore_range;
struct i2c_force_data *forces;
@@ -100,9 +93,6 @@
#define SENSORS_INSMOD \
I2C_CLIENT_MODULE_PARM(probe, \
"List of adapter,address pairs to scan additionally"); \
- I2C_CLIENT_MODULE_PARM(probe_range, \
- "List of adapter,start-addr,end-addr triples to scan " \
- "additionally"); \
I2C_CLIENT_MODULE_PARM(ignore, \
"List of adapter,address pairs not to scan"); \
I2C_CLIENT_MODULE_PARM(ignore_range, \
@@ -114,7 +104,6 @@
.normal_isa = normal_isa, \
.normal_isa_range = normal_isa_range, \
.probe = probe, \
- .probe_range = probe_range, \
.ignore = ignore, \
.ignore_range = ignore_range, \
.forces = forces, \
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site