lkml.org 
[lkml]   [2004]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 3/20] FRV: Fujitsu FR-V CPU arch implementation part 1
The attached patches provides part 1 of an architecture implementation
for the Fujitsu FR-V CPU series, configurably as Linux or uClinux.

Signed-Off-By: dhowells@redhat.com
---
diffstat frv-arch_1-2610rc1mm3.diff
Kconfig | 496 +++++++++++++++++++++++++++++++++++++++++++++++++++
Makefile | 118 ++++++++++++
boot/Makefile | 73 +++++++
kernel/vmlinux.lds.S | 187 +++++++++++++++++++
4 files changed, 874 insertions(+)
diff -uNrp /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/Makefile linux-2.6.10-rc1-mm3-frv/arch/frv/Makefile
--- /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.10-rc1-mm3-frv/arch/frv/Makefile 2004-11-05 14:13:03.323544758 +0000
@@ -0,0 +1,118 @@
+#
+# frv/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (c) 2003, 2004 Red Hat Inc.
+# - Written by David Howells <dhowells@redhat.com>
+# - Derived from arch/m68knommu/Makefile,
+# Copyright (c) 1999,2001 D. Jeff Dionne <jeff@lineo.ca>,
+# Rt-Control Inc. / Lineo, Inc.
+#
+# Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uclinux.org>,
+# Kenneth Albanowski <kjahds@kjahds.com>,
+#
+# Based on arch/m68k/Makefile:
+# Copyright (C) 1994 by Hamish Macdonald
+#
+
+CCSPECS := $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-)
+CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS)))
+CPUCLASS := fr400
+
+# test for cross compiling
+COMPILE_ARCH = $(shell uname -m)
+
+ifdef CONFIG_MMU
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+else
+UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+endif
+
+ARCHMODFLAGS += -G0 -mlong-calls
+
+ifdef CONFIG_GPREL_DATA_8
+CFLAGS += -G8
+else
+ifdef CONFIG_GPREL_DATA_4
+CFLAGS += -G4
+else
+ifdef CONFIG_GPREL_DATA_NONE
+CFLAGS += -G0
+endif
+endif
+endif
+
+#LDFLAGS_vmlinux := -Map linkmap.txt
+
+ifdef CONFIG_GC_SECTIONS
+CFLAGS += -ffunction-sections -fdata-sections
+LINKFLAGS += --gc-sections
+endif
+
+ifndef CONFIG_FRAME_POINTER
+CFLAGS += -mno-linked-fp
+endif
+
+ifdef CONFIG_CPU_FR451_COMPILE
+CFLAGS += -mcpu=fr450
+AFLAGS += -mcpu=fr450
+ASFLAGS += -mcpu=fr450
+else
+ifdef CONFIG_CPU_FR551_COMPILE
+CFLAGS += -mcpu=fr550
+AFLAGS += -mcpu=fr550
+ASFLAGS += -mcpu=fr550
+else
+CFLAGS += -mcpu=fr400
+AFLAGS += -mcpu=fr400
+ASFLAGS += -mcpu=fr400
+endif
+endif
+
+# pretend the kernel is going to run on an FR400 with no media-fp unit
+# - reserve CC3 for use with atomic ops
+# - all the extra registers are dealt with only at context switch time
+CFLAGS += -mno-fdpic -mgpr-32 -msoft-float -mno-media
+CFLAGS += -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15
+AFLAGS += -mno-fdpic
+ASFLAGS += -mno-fdpic
+
+# make sure the .S files get compiled with debug info
+# and disable optimisations that are unhelpful whilst debugging
+ifdef CONFIG_DEBUG_INFO
+CFLAGS += -O1
+AFLAGS += -Wa,--gdwarf2
+ASFLAGS += -Wa,--gdwarf2
+endif
+
+head-y := arch/frv/kernel/head.o arch/frv/kernel/init_task.o
+
+core-y += arch/frv/kernel/ arch/frv/mm/
+libs-y += arch/frv/lib/
+
+core-$(CONFIG_MB93090_MB00) += arch/frv/mb93090-mb00/
+
+all: Image
+
+Image: vmlinux
+ $(Q)$(MAKE) $(build)=arch/frv/boot $@
+
+bootstrap:
+ $(Q)$(MAKEBOOT) bootstrap
+
+archmrproper:
+ $(Q)$(MAKE) -C arch/frv/boot mrproper
+
+archclean:
+ $(Q)$(MAKE) -C arch/frv/boot clean
+
+archdep: scripts/mkdep symlinks
+ $(Q)$(MAKE) -C arch/frv/boot dep
diff -uNrp /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/boot/Makefile linux-2.6.10-rc1-mm3-frv/arch/frv/boot/Makefile
--- /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/boot/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.10-rc1-mm3-frv/arch/frv/boot/Makefile 2004-11-05 14:13:03.064566632 +0000
@@ -0,0 +1,73 @@
+#
+# arch/arm/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995-2000 Russell King
+#
+
+SYSTEM =$(TOPDIR)/$(LINUX)
+
+ZTEXTADDR = 0x02080000
+PARAMS_PHYS = 0x0207c000
+INITRD_PHYS = 0x02180000
+INITRD_VIRT = 0x02180000
+
+#
+# If you don't define ZRELADDR above,
+# then it defaults to ZTEXTADDR
+#
+ifeq ($(ZRELADDR),)
+ZRELADDR = $(ZTEXTADDR)
+endif
+
+export SYSTEM ZTEXTADDR ZBSSADDR ZRELADDR INITRD_PHYS INITRD_VIRT PARAMS_PHYS
+
+Image: $(obj)/Image
+
+targets: $(obj)/Image
+
+$(obj)/Image: vmlinux FORCE
+ $(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+
+#$(obj)/Image: $(CONFIGURE) $(SYSTEM)
+# $(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+
+bzImage: zImage
+
+zImage: $(CONFIGURE) compressed/$(LINUX)
+ $(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+
+bootpImage: bootp/bootp
+ $(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+
+compressed/$(LINUX): $(TOPDIR)/$(LINUX) dep
+ @$(MAKE) -C compressed $(LINUX)
+
+bootp/bootp: zImage initrd
+ @$(MAKE) -C bootp bootp
+
+initrd:
+ @test "$(INITRD_VIRT)" != "" || (echo This architecture does not support INITRD; exit -1)
+ @test "$(INITRD)" != "" || (echo You must specify INITRD; exit -1)
+
+#
+# installation
+#
+install: $(CONFIGURE) Image
+ sh ./install.sh $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) Image $(TOPDIR)/System.map "$(INSTALL_PATH)"
+
+zinstall: $(CONFIGURE) zImage
+ sh ./install.sh $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) zImage $(TOPDIR)/System.map "$(INSTALL_PATH)"
+
+#
+# miscellany
+#
+mrproper clean:
+ $(RM) Image zImage bootpImage
+# @$(MAKE) -C compressed clean
+# @$(MAKE) -C bootp clean
+
+dep:
diff -uNrp /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/Kconfig linux-2.6.10-rc1-mm3-frv/arch/frv/Kconfig
--- /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.10-rc1-mm3-frv/arch/frv/Kconfig 2004-11-05 14:13:03.065566547 +0000
@@ -0,0 +1,496 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+config FRV
+ bool
+ default y
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default n
+
+config GENERIC_HARDIRQS
+ bool
+ default n
+
+mainmenu "Fujitsu FR-V Kernel Configuration"
+
+source "init/Kconfig"
+
+
+menu "Fujitsu FR-V system setup"
+
+config MMU
+ bool "MMU support"
+ help
+ This options switches on and off support for the FR-V MMU
+ (effectively switching between vmlinux and uClinux). Not all FR-V
+ CPUs support this. Currently only the FR451 has a sufficiently
+ featured MMU.
+
+config FRV_OUTOFLINE_ATOMIC_OPS
+ bool "Out-of-line the FRV atomic operations"
+ default n
+ help
+ Setting this option causes the FR-V atomic operations to be mostly
+ implemented out-of-line.
+
+ See Documentation/fujitsu/frv/atomic-ops.txt for more information.
+
+config HIGHMEM
+ bool "High memory support"
+ depends on MMU
+ default y
+ help
+ If you wish to use more than 256MB of memory with your MMU based
+ system, you will need to select this option. The kernel can only see
+ the memory between 0xC0000000 and 0xD0000000 directly... everything
+ else must be kmapped.
+
+ The arch is, however, capable of supporting up to 3GB of SDRAM.
+
+config HIGHPTE
+ bool "Allocate page tables in highmem"
+ depends on HIGHMEM
+ default y
+ help
+ The VM uses one page of memory for each page table. For systems
+ with a lot of RAM, this can be wasteful of precious low memory.
+ Setting this option will put user-space page tables in high memory.
+
+choice
+ prompt "uClinux kernel load address"
+ depends on !MMU
+ default UCPAGE_OFFSET_C0000000
+ help
+ This option sets the base address for the uClinux kernel. The kernel
+ will rearrange the SDRAM layout to start at this address, and move
+ itself to start there. It must be greater than 0, and it must be
+ sufficiently less than 0xE0000000 that the SDRAM does not intersect
+ the I/O region.
+
+ The base address must also be aligned such that the SDRAM controller
+ can decode it. For instance, a 512MB SDRAM bank must be 512MB aligned.
+
+config UCPAGE_OFFSET_20000000
+ bool "0x20000000"
+
+config UCPAGE_OFFSET_40000000
+ bool "0x40000000"
+
+config UCPAGE_OFFSET_60000000
+ bool "0x60000000"
+
+config UCPAGE_OFFSET_80000000
+ bool "0x80000000"
+
+config UCPAGE_OFFSET_A0000000
+ bool "0xA0000000"
+
+config UCPAGE_OFFSET_C0000000
+ bool "0xC0000000 (Recommended)"
+
+endchoice
+
+config PROTECT_KERNEL
+ bool "Protect core kernel against userspace"
+ depends on !MMU
+ default y
+ help
+ Selecting this option causes the uClinux kernel to change the
+ permittivity of DAMPR register covering the core kernel image to
+ prevent userspace accessing the underlying memory directly.
+
+choice
+ prompt "CPU Caching mode"
+ default FRV_DEFL_CACHE_WBACK
+ help
+ This option determines the default caching mode for the kernel.
+
+ Write-Back caching mode involves the all reads and writes causing
+ the affected cacheline to be read into the cache first before being
+ operated upon. Memory is not then updated by a write until the cache
+ is filled and a cacheline needs to be displaced from the cache to
+ make room. Only at that point is it written back.
+
+ Write-Behind caching is similar to Write-Back caching, except that a
+ write won't fetch a cacheline into the cache if there isn't already
+ one there; it will write directly to memory instead.
+
+ Write-Through caching only fetches cachelines from memory on a
+ read. Writes always get written directly to memory. If the affected
+ cacheline is also in cache, it will be updated too.
+
+ The final option is to turn of caching entirely.
+
+ Note that not all CPUs support Write-Behind caching. If the CPU on
+ which the kernel is running doesn't, it'll fall back to Write-Back
+ caching.
+
+config FRV_DEFL_CACHE_WBACK
+ bool "Write-Back"
+
+config FRV_DEFL_CACHE_WBEHIND
+ bool "Write-Behind"
+
+config FRV_DEFL_CACHE_WTHRU
+ bool "Write-Through"
+
+config FRV_DEFL_CACHE_DISABLED
+ bool "Disabled"
+
+endchoice
+
+menu "CPU core support"
+
+config CPU_FR401
+ bool "Include FR401 core support"
+ depends on !MMU
+ default y
+ help
+ This enables support for the FR401, FR401A and FR403 CPUs
+
+config CPU_FR405
+ bool "Include FR405 core support"
+ depends on !MMU
+ default y
+ help
+ This enables support for the FR405 CPU
+
+config CPU_FR451
+ bool "Include FR451 core support"
+ default y
+ help
+ This enables support for the FR451 CPU
+
+config CPU_FR451_COMPILE
+ bool "Specifically compile for FR451 core"
+ depends on CPU_FR451 && !CPU_FR401 && !CPU_FR405 && !CPU_FR551
+ default y
+ help
+ This causes appropriate flags to be passed to the compiler to
+ optimise for the FR451 CPU
+
+config CPU_FR551
+ bool "Include FR551 core support"
+ depends on !MMU
+ default y
+ help
+ This enables support for the FR555 CPU
+
+config CPU_FR551_COMPILE
+ bool "Specifically compile for FR551 core"
+ depends on CPU_FR551 && !CPU_FR401 && !CPU_FR405 && !CPU_FR451
+ default y
+ help
+ This causes appropriate flags to be passed to the compiler to
+ optimise for the FR555 CPU
+
+endmenu
+
+choice
+ prompt "System support"
+ default MB93091_VDK
+
+config MB93091_VDK
+ bool "MB93091 CPU board with or without motherboard"
+
+config MB93093_PDK
+ bool "MB93093 PDK unit"
+
+endchoice
+
+if MB93091_VDK
+choice
+ prompt "Motherboard support"
+ default MB93090_MB00
+
+config MB93090_MB00
+ bool "Use the MB93090-MB00 motherboard"
+ help
+ Select this option if the MB93091 CPU board is going to be used with
+ a MB93090-MB00 VDK motherboard
+
+config MB93091_NO_MB
+ bool "Use standalone"
+ help
+ Select this option if the MB93091 CPU board is going to be used
+ without a motherboard
+
+endchoice
+endif
+
+choice
+ prompt "GP-Relative data support"
+ default GPREL_DATA_8
+ help
+ This option controls what data, if any, should be placed in the GP
+ relative data sections. Using this means that the compiler can
+ generate accesses to the data using GR16-relative addressing which
+ is faster than absolute instructions and saves space (2 instructions
+ per access).
+
+ However, the GPREL region is limited in size because the immediate
+ value used in the load and store instructions is limited to a 12-bit
+ signed number.
+
+ So if the linker starts complaining that accesses to GPREL data are
+ out of range, try changing this option from the default.
+
+ Note that modules will always be compiled with this feature disabled
+ as the module data will not be in range of the GP base address.
+
+config GPREL_DATA_8
+ bool "Put data objects of up to 8 bytes into GP-REL"
+
+config GPREL_DATA_4
+ bool "Put data objects of up to 4 bytes into GP-REL"
+
+config GPREL_DATA_NONE
+ bool "Don't use GP-REL"
+
+endchoice
+
+config PCI
+ bool "Use PCI"
+ depends on MB93090_MB00
+ default y
+ help
+ Some FR-V systems (such as the MB93090-MB00 VDK) have PCI
+ onboard. If you have one of these boards and you wish to use the PCI
+ facilities, say Y here.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+config RESERVE_DMA_COHERENT
+ bool "Reserve DMA coherent memory"
+ depends on PCI && !MMU
+ default y
+ help
+ Many PCI drivers require access to uncached memory for DMA device
+ communications (such as is done with some Ethernet buffer rings). If
+ a fully featured MMU is available, this can be done through page
+ table settings, but if not, a region has to be set aside and marked
+ with a special DAMPR register.
+
+ Setting this option causes uClinux to set aside a portion of the
+ available memory for use in this manner. The memory will then be
+ unavailable for normal kernel use.
+
+source "drivers/pci/Kconfig"
+
+config PCMCIA
+ tristate "Use PCMCIA"
+ help
+ Say Y here if you want to attach PCMCIA- or PC-cards to your FR-V
+ board. These are credit-card size devices such as network cards,
+ modems or hard drives often used with laptops computers. There are
+ actually two varieties of these cards: the older 16 bit PCMCIA cards
+ and the newer 32 bit CardBus cards. If you want to use CardBus
+ cards, you need to say Y here and also to "CardBus support" below.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). Please also read the PCMCIA-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as modules, choose M here: the
+ modules will be called pcmcia_core and ds.
+
+#config MATH_EMULATION
+# bool "Math emulation support (EXPERIMENTAL)"
+# depends on EXPERIMENTAL
+# help
+# At some point in the future, this will cause floating-point math
+# instructions to be emulated by the kernel on machines that lack a
+# floating-point math coprocessor. Thrill-seekers and chronically
+# sleep-deprived psychotic hacker types can say Y now, everyone else
+# should probably wait a while.
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+menu "Kernel hacking"
+
+config DEBUG_KERNEL
+ bool "Kernel debugging"
+ help
+ Say Y here if you are developing drivers or trying to debug and
+ identify kernel problems.
+
+config EARLY_PRINTK
+ bool "Early printk"
+ depends on EMBEDDED && DEBUG_KERNEL
+ default n
+ help
+ Write kernel log output directly into the VGA buffer or to a serial
+ port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd or the X server. You should normally N here,
+ unless you want to debug such a crash.
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+
+config DEBUG_SLAB
+ bool "Debug memory allocations"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to have the kernel do limited verification on memory
+ allocation as well as poisoning memory on free to catch use of freed
+ memory.
+
+config MAGIC_SYSRQ
+ bool "Magic SysRq key"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here, you will have some control over the system even
+ if the system crashes for example during kernel debugging (e.g., you
+ will be able to flush the buffer cache to disk, reboot the system
+ immediately or dump some status information). This is accomplished
+ by pressing various keys while holding SysRq (Alt+PrintScreen). It
+ also works on a serial console (on PC hardware at least), if you
+ send a BREAK and then within 5 seconds a command keypress. The
+ keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+ unless you really know what this hack does.
+
+config DEBUG_SPINLOCK
+ bool "Spinlock debugging"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here and build SMP to catch missing spinlock initialization
+ and certain other kinds of spinlock errors commonly made. This is
+ best used in conjunction with the NMI watchdog so that spinlock
+ deadlocks are also debuggable.
+
+config DEBUG_SPINLOCK_SLEEP
+ bool "Sleep-inside-spinlock checking"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here, various routines which may sleep will become very
+ noisy if they are called with a spinlock held.
+
+config DEBUG_PAGEALLOC
+ bool "Page alloc debugging"
+ depends on DEBUG_KERNEL
+ help
+ Unmap pages from the kernel linear mapping after free_pages().
+ This results in a large slowdown, but helps to find certain types
+ of memory corruptions.
+
+config DEBUG_HIGHMEM
+ bool "Highmem debugging"
+ depends on DEBUG_KERNEL && HIGHMEM
+ help
+ This options enables addition error checking for high memory systems.
+ Disable for production systems.
+
+config DEBUG_INFO
+ bool "Compile the kernel with debug info"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the resulting kernel image will include
+ debugging info resulting in a larger kernel image.
+ Say Y here only if you plan to use gdb to debug the kernel.
+ If you don't debug the kernel, you can say N.
+
+config DEBUG_BUGVERBOSE
+ bool "Verbose BUG() reporting"
+ depends on DEBUG_KERNEL
+
+config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the resulting kernel image will be slightly larger
+ and slower, but it will give very useful debugging information.
+ If you don't debug the kernel, you can say N, but we may not be able
+ to solve problems without frame pointers.
+
+config GDBSTUB
+ bool "Remote GDB kernel debugging"
+ depends on DEBUG_KERNEL
+ select DEBUG_INFO
+ select FRAME_POINTER
+ help
+ If you say Y here, it will be possible to remotely debug the kernel
+ using gdb. This enlarges your kernel ELF image disk size by several
+ megabytes and requires a machine with more than 16 MB, better 32 MB
+ RAM to avoid excessive linking time. This is only useful for kernel
+ hackers. If unsure, say N.
+
+choice
+ prompt "GDB stub port"
+ default GDBSTUB_UART1
+ depends on GDBSTUB
+ help
+ Select the on-CPU port used for GDB-stub
+
+config GDBSTUB_UART0
+ bool "/dev/ttyS0"
+
+config GDBSTUB_UART1
+ bool "/dev/ttyS1"
+
+endchoice
+
+config GDBSTUB_IMMEDIATE
+ bool "Break into GDB stub immediately"
+ depends on GDBSTUB
+ help
+ If you say Y here, GDB stub will break into the program as soon as
+ possible, leaving the program counter at the beginning of
+ start_kernel() in init/main.c.
+
+config GDB_CONSOLE
+ bool "Console output to GDB"
+ depends on KGDB
+ help
+ If you are using GDB for remote debugging over a serial port and
+ would like kernel messages to be formatted into GDB $O packets so
+ that GDB prints them as program output, say 'Y'.
+
+endmenu
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff -uNrp /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/kernel/vmlinux.lds.S linux-2.6.10-rc1-mm3-frv/arch/frv/kernel/vmlinux.lds.S
--- /warthog/kernels/linux-2.6.10-rc1-mm3/arch/frv/kernel/vmlinux.lds.S 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.10-rc1-mm3-frv/arch/frv/kernel/vmlinux.lds.S 2004-11-05 14:13:03.258550247 +0000
@@ -0,0 +1,187 @@
+/* ld script to make FRV Linux kernel -*- c -*-
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
+ */
+OUTPUT_FORMAT("elf32-frv", "elf32-frv", "elf32-frv")
+OUTPUT_ARCH(frv)
+ENTRY(_start)
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+jiffies = jiffies_64 + 4;
+
+__page_offset = 0xc0000000; /* start of area covered by struct pages */
+__kernel_image_start = __page_offset; /* address at which kernel image resides */
+
+SECTIONS
+{
+ . = __kernel_image_start;
+
+ /* discardable initialisation code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
+ __init_begin = .;
+
+ _sinittext = .;
+ .init.text : {
+ *(.text.head)
+#ifndef CONFIG_DEBUG_INFO
+ *(.init.text)
+ *(.exit.text)
+ *(.exit.data)
+ *(.exitcall.exit)
+#endif
+ }
+ _einittext = .;
+ .init.data : { *(.init.data) }
+
+ . = ALIGN(8);
+ __setup_start = .;
+ .setup.init : { KEEP(*(.init.setup)) }
+ __setup_end = .;
+
+ __initcall_start = .;
+ .initcall.init : {
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+ SECURITY_INIT
+ . = ALIGN(4);
+ __alt_instructions = .;
+ .altinstructions : { *(.altinstructions) }
+ __alt_instructions_end = .;
+ .altinstr_replacement : { *(.altinstr_replacement) }
+
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) }
+ __per_cpu_end = .;
+
+ . = ALIGN(4096);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
+
+ . = ALIGN(THREAD_SIZE);
+ __init_end = .;
+
+ /* put sections together that have massive alignment issues */
+ . = ALIGN(THREAD_SIZE);
+ .data.init_task : {
+ /* init task record & stack */
+ *(.data.init_task)
+ }
+
+ .trap : {
+ /* trap table management - read entry-table.S before modifying */
+ . = ALIGN(8192);
+ __trap_tables = .;
+ *(.trap.user)
+ *(.trap.kernel)
+ . = ALIGN(4096);
+ *(.trap.break)
+ }
+
+ . = ALIGN(4096);
+ .data.page_aligned : { *(.data.idt) }
+
+ . = ALIGN(L1_CACHE_BYTES);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ /* Text and read-only data */
+ . = ALIGN(4);
+ _text = .;
+ _stext = .;
+ .text : {
+ *(
+ .text.start .text .text.*
+#ifdef CONFIG_DEBUG_INFO
+ .init.text
+ .exit.text
+ .exitcall.exit
+#endif
+ )
+ SCHED_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ *(.exitcall.exit)
+ } = 0x9090
+
+ _etext = .; /* End of text section */
+
+ RODATA
+
+ .rodata : {
+ *(.trap.vector)
+
+ /* this clause must not be modified - the ordering and adjacency are imperative */
+ __trap_fixup_tables = .;
+ *(.trap.fixup.user .trap.fixup.kernel)
+
+ }
+
+ . = ALIGN(8); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { KEEP(*(__ex_table)) }
+ __stop___ex_table = .;
+
+ _sdata = .;
+ .data : { /* Data */
+ *(.data .data.*)
+ *(.exit.data)
+ CONSTRUCTORS
+ }
+
+ _edata = .; /* End of data section */
+
+ /* GP section */
+ . = ALIGN(L1_CACHE_BYTES);
+ _gp = . + 2048;
+ PROVIDE (gp = _gp);
+
+ .sdata : { *(.sdata .sdata.*) }
+
+ /* BSS */
+ . = ALIGN(L1_CACHE_BYTES);
+ __bss_start = .;
+
+ .sbss : { *(.sbss .sbss.*) }
+ .bss : { *(.bss .bss.*) }
+ .bss.stack : { *(.bss) }
+
+ __bss_stop = .;
+ _end = . ;
+ . = ALIGN(PAGE_SIZE);
+ __kernel_image_end = .;
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+
+ .debug_line 0 : { *(.debug_line) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_ranges 0 : { *(.debug_ranges) }
+
+ .comment 0 : { *(.comment) }
+}
+
+__kernel_image_size_no_bss = __bss_start - __kernel_image_start;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:07    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site