lkml.org 
[lkml]   [2004]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [2.6 patch] Build Error 2: build of pca200e.bin fails
On Sun, Nov 28, 2004 at 08:21:21PM +0100, Adrian Bunk wrote:
> On Fri, Nov 19, 2004 at 05:03:29AM -0500, Manfred Schwarb wrote:
> > Hi,
> >
> > OK, I know I'm stupid...
> > I always forget to unset my GZIP options, as I have
> > "export GZIP='-9 -N'" in my .bashrc.
> >
> > This results in the following:
> >
> > objcopy -Iihex pca200e.data -Obinary pca200e.bin.gz
> > gzip -df pca200e.bin.gz
> > ./fore200e_mkfirm -k -b _fore200e_pca_fw \
> > -i pca200e.bin -o fore200e_pca_fw.c
> > ./fore200e_mkfirm: can't open pca200e.bin for reading
> > make[2]: *** [fore200e_pca_fw.c] Error 254
> > make[2]: Leaving directory `/usr/src/linux-2.4.28/drivers/atm'
> > make[1]: *** [_modsubdir_atm] Error 2
> > make[1]: Leaving directory `/usr/src/linux-2.4.28/drivers'
> > make: *** [_mod_drivers] Error 2
> >
> >
> > The following patch would correct this:
> >
> > --- linux-2.4.28/drivers/atm/Makefile.orig 2004-11-19 09:33:21.000000000 +0000
> > +++ linux-2.4.28/drivers/atm/Makefile 2004-11-19 09:38:07.000000000 +0000
> > @@ -92,7 +92,7 @@
> > # deal with the various suffixes of the binary firmware images
> > %.bin %.bin1 %.bin2: %.data
> > objcopy -Iihex $< -Obinary $@.gz
> > - gzip -df $@.gz
> > + gzip -n -df $@.gz
> >
> > fore_200e.o: $(fore_200e-objs)
> > $(LD) -r -o $@ $(fore_200e-objs)
>
>
> I have no problems with this patch, but shouldn't the same be done
> in 2.6?
>
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
>
> --- linux-2.6.10-rc2-mm3-full/drivers/atm/Makefile.old 2004-11-28 20:18:04.000000000 +0100
> +++ linux-2.6.10-rc2-mm3-full/drivers/atm/Makefile 2004-11-28 20:18:15.000000000 +0100
> @@ -68,4 +68,4 @@
> # deal with the various suffixes of the binary firmware images
> $(obj)/%.bin $(obj)/%.bin1 $(obj)/%.bin2: $(src)/%.data
> objcopy -Iihex $< -Obinary $@.gz
> - gzip -df $@.gz
> + gzip -n -df $@.gz

Isnt it exactly the same of what has been merged in v2.4?

I can't see any difference.

[marcelo@dmt atm]$ bk diffs -u -r1.8 -r1.9 Makefile
===== Makefile 1.8 vs 1.9 =====
--- 1.8/drivers/atm/Makefile Mon Jul 28 11:35:31 2003
+++ 1.9/drivers/atm/Makefile Mon Nov 22 21:54:09 2004
@@ -92,7 +92,7 @@
# deal with the various suffixes of the binary firmware images
%.bin %.bin1 %.bin2: %.data
objcopy -Iihex $< -Obinary $@.gz
- gzip -df $@.gz
+ gzip -n -df $@.gz

fore_200e.o: $(fore_200e-objs)
$(LD) -r -o $@ $(fore_200e-objs)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.035 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site