Messages in this thread | | | Date | Tue, 30 Nov 2004 10:21:44 +1100 | From | Eyal Lebedinsky <> | Subject | 2.6.10-rc2-bk13: 'modprobe -r dvb-bt8xx' oops still going strong |
| |
FYI, 'dmesg' follows. Fresh boot and unload.
ff00000 device at location zero CFI: Found no ichxrom @fff00000 device at location zero JEDEC: Found no ichxrom @fff00000 device at location zero CFI: Found no ichxrom @fff00000 device at location zero JEDEC: Found no ichxrom @fff00000 device at location zero CFI: Found no ichxrom @fff00000 device at location zero JEDEC: Found no ichxrom @fff00000 device at location zero CFI: Found no ichxrom @fff00000 device at location zero JEDEC: Found no ichxrom @fff00000 device at location zero CFI: Found no ichxrom @fff00000 device at location zero Found: SST 49LF004B ichxrom @fff00000: Found 1 x8 devices at 0x0 in 8-bit bank ichxrom @fff00000: Found an alias at 0x80000 for the chip at 0x0 using fwh lock/unlock method number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. CFI: Found no ichxrom @fff80000 device at location zero JEDEC: Found no ichxrom @fff80000 device at location zero CFI: Found no ichxrom @fff80000 device at location zero JEDEC: Found no ichxrom @fff80000 device at location zero CFI: Found no ichxrom @fff80000 device at location zero JEDEC: Found no ichxrom @fff80000 device at location zero CFI: Found no ichxrom @fff80000 device at location zero JEDEC: Found no ichxrom @fff80000 device at location zero CFI: Found no ichxrom @fff80000 device at location zero JEDEC: Found no ichxrom @fff80000 device at location zero CFI: Found no ichxrom @fff80000 device at location zero Found: SST 49LF004B ichxrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank using fwh lock/unlock method number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Intel 810 + AC97 Audio, version 1.01, 09:38:24 Nov 30 2004 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH5 found at IO 0xdc00 and 0xd800, MEM 0xde101000 and 0xde102000, IRQ 17 i810: Intel ICH5 mmio at 0xf89aa000 and 0xf8a08000 i810_audio: Primary codec has ID 2 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 2 ac97_codec: AC97 Audio codec, id: ALG128 (Unknown) i810_audio: AC'97 codec 2 Unable to map surround DAC's (or DAC's not present), total channels = 2 Intel(R) PRO/1000 Network Driver - version 5.5.4-k2 Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:01.0 to 64 divert: allocating divert_blk for eth0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 21 (level, low) -> IRQ 21 bttv0: Bt848 (rev 18) at 0000:03:01.0, irq: 21, latency: 32, mmio: 0xde000000 bttv0: using: STB, Gateway P/N 6000699 (bt848) [card=3,insmod option] bttv0: gpio config override: mask=0x7, mux=0x1,0x0,0x2,0x3,0x4 bttv0: gpio: en=00000000, out=00000000 in=00f080fc [init] tuner: chip found at addr 0xc0 i2c-bus bt848 #0 [sw] tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. bttv0: using tuner=2 tuner: type already set to 5, ignoring request for 2 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL can sleep, using XTAL (35468950). bttv: Bt8xx card found (1). ACPI: PCI interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 22 bttv1: Bt878 (rev 17) at 0000:03:02.0, irq: 22, latency: 32, mmio: 0xde001000 bttv1: detected: AVermedia DVB-T 771 [card=123], PCI subsystem ID is 1461:0771 bttv1: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected] bttv1: gpio config override: mask=0x7, mux=0x1,0x0,0x2,0x3,0x4 bttv1: gpio: en=00000000, out=00000000 in=0090000f [init] bttv1: using tuner=4 bttv1: registered device video1 bttv1: registered device vbi1 bttv1: PLL: 28636363 => 35468950 .. ok bttv1: add subdevice "remote1" bttv1: add subdevice "dvb1" bttv: Bt8xx card found (2). ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 16 (level, low) -> IRQ 16 bttv2: Bt878 (rev 17) at 0000:03:03.0, irq: 16, latency: 32, mmio: 0xde003000 bttv2: detected: AverMedia AverTV DVB-T [card=124], PCI subsystem ID is 1461:0761 bttv2: using: AverMedia AverTV DVB-T 761 [card=124,autodetected] bttv2: gpio config override: mask=0x7, mux=0x1,0x0,0x2,0x3,0x4 bttv2: gpio: en=00000000, out=00000000 in=009c001d [init] bttv2: using tuner=-1 bttv2: registered device video2 bttv2: registered device vbi2 bttv2: PLL: 28636363 => 35468950 .. ok bttv2: add subdevice "remote2" bttv2: add subdevice "dvb2" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI interrupt 0000:03:02.1[A] -> GSI 22 (level, low) -> IRQ 22 bt878(0): Bt878 (rev 17) at 03:02.1, irq: 22, latency: 32, memory: 0xde002000 bt878: Bt878 AUDIO function found (1). ACPI: PCI interrupt 0000:03:03.1[A] -> GSI 16 (level, low) -> IRQ 16 bt878(1): Bt878 (rev 17) at 03:03.1, irq: 16, latency: 32, memory: 0xde004000 btaudio: driver version 0.7 loaded [digital+analog] SCSI subsystem initialized dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 18 (level, low) -> IRQ 18 dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x57 dc395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s dc395x: Connectors: ext50 Termination: Auto Low High dc395x: Performing initial SCSI bus reset scsi0 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 21 (level, low) -> IRQ 21 ohci1394: fw-host0: Remapped memory spaces reg 0xf9076000 ohci1394: fw-host0: Soft reset finished ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: 0000000f ohci1394: fw-host0: 4 iso receive contexts available ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: 000000ff ohci1394: fw-host0: 8 iso transmit contexts available ohci1394: fw-host0: Receive DMA ctx=0 initialized ohci1394: fw-host0: Receive DMA ctx=0 initialized ohci1394: fw-host0: Transmit DMA ctx=0 initialized ohci1394: fw-host0: Transmit DMA ctx=1 initialized ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[dd004000-dd0047ff] Max Packet=[2048] ieee1394: CSR: setting expire to 98, HZ=1000 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex ohci1394: fw-host0: IntEvent: 00020010 ohci1394: fw-host0: irq_handler: Bus reset requested ohci1394: fw-host0: Cancel request received ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409 ohci1394: fw-host0: IntEvent: 00010000 ohci1394: fw-host0: SelfID interrupt received (phyid 0, root) ohci1394: fw-host0: SelfID packet 0x807f8c56 received ieee1394: Including SelfID 0x568c7f80 ohci1394: fw-host0: SelfID for this node is 0x807f8c56 ohci1394: fw-host0: SelfID complete ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0 ieee1394: NodeMgr: Processing host reset for knodemgrd_0 ohci1394: fw-host0: Single packet rcv'd ohci1394: fw-host0: Got phy packet ctx=0 ... discarded ieee1394: send packet local: ffc00140 ffc0ffff f0000400 ieee1394: received packet: ffc00140 ffc0ffff f0000400 ieee1394: send packet local: ffc00160 ffc00000 00000000 31990404 ieee1394: received packet: ffc00160 ffc00000 00000000 31990404 ieee1394: send packet local: ffc00540 ffc0ffff f0000404 ieee1394: received packet: ffc00540 ffc0ffff f0000404 ieee1394: send packet local: ffc00560 ffc00000 00000000 34393331 ieee1394: received packet: ffc00560 ffc00000 00000000 34393331 ieee1394: send packet local: ffc00940 ffc0ffff f0000408 ieee1394: received packet: ffc00940 ffc0ffff f0000408 ieee1394: send packet local: ffc00960 ffc00000 00000000 32a264e0 ieee1394: received packet: ffc00960 ffc00000 00000000 32a264e0 ieee1394: send packet local: ffc00d40 ffc0ffff f000040c ieee1394: received packet: ffc00d40 ffc0ffff f000040c ieee1394: send packet local: ffc00d60 ffc00000 00000000 00610d00 ieee1394: received packet: ffc00d60 ffc00000 00000000 00610d00 ieee1394: send packet local: ffc01140 ffc0ffff f0000410 ieee1394: received packet: ffc01140 ffc0ffff f0000410 ieee1394: send packet local: ffc01160 ffc00000 00000000 ebd66900 ieee1394: received packet: ffc01160 ffc00000 00000000 ebd66900 ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000 ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000 ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000 ieee1394: received packet: ffc01570 ffc00000 00000000 04000000 ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d61000069d6eb] ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0 ohci1394: fw-host0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0, speed=0 ohci1394: fw-host0: Starting transmit DMA ctx=0 ohci1394: fw-host0: IntEvent: 00000001 ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011 ohci1394: fw-host0: Packet sent to node 63 tcode=0x0 tLabel=0x00 ack=0x11 spd=0 data=0x1F0000C0 ctx=0 eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org> divert: not allocating divert_blk for non-ethernet device eth1 eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ohci1394: fw-host0: ohci_iso_recv_init: packet-per-buffer mode, DMA buffer is 16 pages (65536 bytes), using 16 blocks, buf_stride 4096, block_irq_interval 1 ide-cd: ignoring drive hdc hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: ATAPI Model: DVD RW 8XMax Rev: 130D Type: CD-ROM ANSI SCSI revision: 02 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Intel 810 + AC97 Audio, version 1.01, 09:38:24 Nov 30 2004 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH5 found at IO 0xdc00 and 0xd800, MEM 0xde101000 and 0xde102000, IRQ 17 i810: Intel ICH5 mmio at 0xf8a08000 and 0xf8a4e000 i810_audio: Primary codec has ID 2 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 2 ac97_codec: AC97 Audio codec, id: ALG128 (Unknown) i810_audio: AC'97 codec 2 Unable to map surround DAC's (or DAC's not present), total channels = 2 DVB: registering new adapter (bttv1). DVB: registering new adapter (bttv2). xxx attach sp887x: waiting for firmware upload... i2c_adapter i2c-3: sendbytes: error - bailout. sp887x_initial_setup: firmware upload... done. DVB: registering frontend 1 (Microtune MT7202DTF)... mt352_read_register: readreg error (ret == -121) dvbfe_mt352: Setup for AverMedia DVB-T 771 xxx attach DVB: registering frontend 0 (AverMedia DVB-T 771)... mt352_read_register: readreg error (ret == -121) mt352_read_register: readreg error (ret == -38) mt352_read_register: readreg error (ret == -38) input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output bt878(0): unloading bt878_mem: 0xf8f98000. bt878(1): unloading bt878_mem: 0xf8f9a000. bttv0: unloading bttv1: unloading devfs_remove: dvb/adapter0/frontend0 not found, cannot remove [<c01a1405>] devfs_remove+0xae/0xb0 [<c0159906>] invalidate_inode_buffers+0x1b/0x80 [<c01ab627>] inode_free_security+0x59/0x8b [<f91b755e>] dvb_unregister_device+0x39/0x89 [dvb_core] [<f91bfdf4>] dvb_unregister_frontend+0x7b/0xcc [dvb_core] [<c01bec81>] kobject_release+0x0/0xa [<f93ff634>] mt352_detach_client+0x52/0x54 [mt352] [<f93ff040>] mt352_ioctl+0x0/0x2a0 [mt352] [<f8a20361>] i2c_del_adapter+0xeb/0x244 [i2c_core] [<c01beca9>] kobject_put+0x1e/0x22 [<f904d23a>] bttv_remove+0xa4/0x160 [bttv] [<c01c6d09>] pci_device_remove+0x3b/0x3d [<c0217a3e>] device_release_driver+0x7f/0x81 [<f904d684>] bttv_cleanup_module+0x0/0x1f [bttv] [<c0217a60>] driver_detach+0x20/0x2e [<c0217e8a>] bus_remove_driver+0x4d/0x8e [<c02183c0>] driver_unregister+0x13/0x27 [<c01c6f36>] pci_unregister_driver+0x16/0x26 [<f904d693>] bttv_cleanup_module+0xf/0x1f [bttv] [<c0133332>] sys_delete_module+0x14e/0x181 [<c014bc3f>] sys_munmap+0x51/0x76 [<c010308b>] syscall_call+0x7/0xb Unable to handle kernel NULL pointer dereference at virtual address 00000228 printing eip: f9053830 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: tsdev psmouse mt352 sp887x v4l1_compat dvb_core i810_audio ac97_codec sr_mod sg ide_scsi ide_cd cdrom it87 eeprom i2c_isa i2c_i801 i2c_sensor eth1394 ohci_hcd ohci1394 ieee1394 dc395x scsi_mod snd_bt87x bttv tuner video_buf firmware_class i2c_algo_bit v4l2_common btcx_risc videodev e1000 snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd snd_page_alloc soundcore i2c_core cfi_cmdset_0002 cfi_util mtdpart jedec_probe cfi_probe gen_probe ichxrom mtdcore chipreg map_funcs ehci_hcd uhci_hcd usbcore shpchp pci_hotplug intel_mch_agp intel_agp agpgart parport_pc parport evdev nls_cp437 msdos fat dm_mod rtc unix CPU: 0 EIP: 0060:[<f9053830>] Not tainted VLI EFLAGS: 00010206 (2.6.10-rc2-bk13) EIP is at bttv_i2c_info+0x36/0x6a [bttv] eax: 000001a0 ebx: f7acae3c ecx: f7acad80 edx: 00000004 esi: f9066670 edi: 00000000 ebp: f770d200 esp: f6d6be50 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 5863, threadinfo=f6d6b000 task=f6d65520) Stack: f7799400 c01beca9 f7778280 f770d200 f7ab7080 f90664a4 00000000 f905319d f90664a0 f770d200 00000000 f8a208c7 f770d200 f91bfe28 f7799400 c01bec81 f770d200 f7ab7080 f906660c f90664a4 f93ff606 f770d200 f7783d80 f770d200 Call Trace: [<c01beca9>] kobject_put+0x1e/0x22 [<f905319d>] detach_inform+0x24/0x2a [bttv] [<f8a208c7>] i2c_detach_client+0x2e/0x104 [i2c_core] [<f91bfe28>] dvb_unregister_frontend+0xaf/0xcc [dvb_core] [<c01bec81>] kobject_release+0x0/0xa [<f93ff606>] mt352_detach_client+0x24/0x54 [mt352] [<f8a20361>] i2c_del_adapter+0xeb/0x244 [i2c_core] [<c01beca9>] kobject_put+0x1e/0x22 [<f904d23a>] bttv_remove+0xa4/0x160 [bttv] [<c01c6d09>] pci_device_remove+0x3b/0x3d [<c0217a3e>] device_release_driver+0x7f/0x81 [<f904d684>] bttv_cleanup_module+0x0/0x1f [bttv] [<c0217a60>] driver_detach+0x20/0x2e [<c0217e8a>] bus_remove_driver+0x4d/0x8e [<c02183c0>] driver_unregister+0x13/0x27 [<c01c6f36>] pci_unregister_driver+0x16/0x26 [<f904d693>] bttv_cleanup_module+0xf/0x1f [bttv] [<c0133332>] sys_delete_module+0x14e/0x181 [<c014bc3f>] sys_munmap+0x51/0x76 [<c010308b>] syscall_call+0x7/0xb Code: 8b 6c 24 24 8b 7c 24 28 8b 98 d0 01 00 00 8b 13 0f 18 02 90 8d b0 d0 01 00 00 39 f3 74 24 8d 8b 44 ff ff ff 8b 41 70 85 c0 74 09 <83> b8 88 00 00 00 00 75 16 8b 02 89 d3 89 c2 0f 18 00 90 39 f3
-- Eyal Lebedinsky (eyal@eyal.emu.id.au) <http://samba.org/eyal/> If attaching .zip rename to .dat - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |