lkml.org 
[lkml]   [2004]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] smsc-ircc2: Add PnP support.
matthieu castet wrote:
> Meelis Roos wrote:
>
>> mc> try to do an "echo auto > /sys/bus/pnp/device_number/resources"
>> mc> mc> It will reenable the device.
>>
>> I tried this on my Toshiba Satellite 1800-314 and the device gets IO
>> resources but is still disabled. echo activate > ... will enable it but
>> the smc-ircc2 driver still finds that the device is disabled (in
>> 2.6.10-rc2+yesterdays BK):
>>
>> nartsiss:~# cat /sys/bus/pnp/devices/00\:0a/options
>> Dependent: 01 - Priority acceptable
>> port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
>> Dependent: 02 - Priority acceptable
>> port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
>> Dependent: 03 - Priority acceptable
>> port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
>> Dependent: 04 - Priority acceptable
>> port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
>
> that's very strange : you must have 2 io entries, 1 dma entry and an irq
> entry.
> Could you try pnpacpi from mm series ?
no need : it is in rc2.
So do you use pnpacpi ?
If so, could you send your dsdt and try with pnpbios?

Matthieu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:08    [W:1.611 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site