Messages in this thread | | | Date | Mon, 04 Oct 2004 09:38:35 +0100 | From | Ian Leonard <> | Subject | Problems with Highpoint driver |
| |
I have an Itox G4C600 motherboard with on board Highpoint HPT366/370 ide controller. I am trying to use the 4 available IDE channels separately (i.e. not as raid). The hpt366 driver sees drives on the 1st channel but not on the 2nd. The Highpoint bios sees all drives.
I tried Highpoint's driver and it sees all drives work (although they used the scsi interface which is not good for me).
I had also tried a different board (same model) and this had the odd problem of seeing different combinations of the disks depending on how the SATA was configured in the BIOS.
Kernel is 2.4.28-pre3. Ideas welcome. Thanks.
-- Ian Leonard
Please ignore spelling and punctuation - I did. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |