lkml.org 
[lkml]   [2004]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: ATA/133 Problems with multiple cards
    Date
    [Heavily stripped address lists]

    On Sunday 17 October 2004 04:51, James Stevenson wrote:
    >
    > then i can only turn the dma up to ATA/100 if i set it to ata/133
    > it will cause the errors. I assume this is something todo with the
    > promise bois not setting up the 3rd card at boot time. It only
    > shows drive listing for 2 of the 3 cards.

    As noted before, this effect was always related to different firmware
    versions on the cards here. Please check boot messages of all cards
    separately, and confirm, that this isn't your problem.

    Thanks,
    Pete

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:07    [W:0.034 / U:30.368 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site