lkml.org 
[lkml]   [2004]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: promise (105a:3319) unattended boot
On Fri, 15 Oct 2004, Alistair John Strachan wrote:

> On Friday 15 Oct 2004 15:41, you wrote:
>> Hello.
>>
>> Got here http://pciids.sourceforge.net/iii/?i=105a3319
>> As http://linux.yyz.us/sata/faq-sata-raid.html#tx4 calls it
>> soft/accelerator raid version
>> Going to use latest kernel from /pub/linux/kernel/v2.4/
>>
>> But bios even with keyboard unplugged requires me to press one of 2 keys
>> to either define array OR continue booting in case no array is defined.
>>
>> What would you recommend me to do?
>> - stay with ft3xx module from promise and 10 level RAID array and not use
>> sata_promise?
>> - define some array in bios and completely ignore that fact and use
>> sata_promise, bypass bios and define custom linux soft raid arrays?
>
> If you define an array, AFAIK the controller doesn't do anything physically to
> the discs. It's just the settings it tells the promise driver (thus software
> RAID). If you define ANY array, the drives should still be detected by Linux
> individually and you can use linux/md to RAID them.

for sanity purposes we generally define spanned volumes each composed of
one disk. this still bites you ocasionaly because the controller will
pause when one or more disks are missing which otherwise may or may not be
catostrophic ie if you have a software raid-5 raid 1 or 10 stripe it'll
probably do fine with one disk missing, but the promise will freak again.

> This is how I'm doing it on my older PATA promise card.
>
>> - anything else (no bios flashing and no hw hacking)?

non-raid sata or pata promise cards are darn cheap...

>
>

--
--------------------------------------------------------------------------
Joel Jaeggli Unix Consulting joelja@darkwing.uoregon.edu
GPG Key Fingerprint: 5C6E 0104 BAF0 40B0 5BD3 C38B F000 35AB B67F 56B2

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.046 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site