lkml.org 
[lkml]   [2004]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: won't work: 2.6.0 && SiI 3112 SATA
Karel Kulhavý a écrit le 06.01.2004 13:56:

> I try to make Adaptec SATA RAID AAR-1210SA (in fact, SiI 3112 ACT 144 chip)
> work under 2.6.0
>
> When booting, get "hde: lost interrupt" and DMA errors. Tried to switch
> on/off local and I/O APIC (singleproc board) and the errors stay the same.
>
> Are these errors experienced on all SiI3112 boards? Are they experienced
> also in 2.4 kernel? Shall I try some "newer" kernel than 2.6.0?

I have NF7-S too (and Seagate sata 120), and it works for me with :

- 2.4.23 and libata
(ftp://ftp.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.4.23-libata2.patch.bz2)
- 2.6.0 and libata (CONFIG_SCSI_SATA=m and CONFIG_SCSI_SATA_SIL=m)

But it doesn't work with the siimage driver (CONFIG_BLK_DEV_SIIMAGE=m)
under 2.4.23 (didn't try it under 2.6, since it worked with libata...)

Question (for Jeff ?) :

Why is my drive (with 2.4.23 and libata2) on /dev/sda ? Why isn't it on
/dev/hde, like (afaik) everybody else ? I'd like to run hdparm to
improve performance (hdparm -tT gives ~ 20 Mb/s)

Thanks

--


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.050 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site