lkml.org 
[lkml]   [2004]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectPROBLEM: PCMCIA in 2.6.0 and 2.4.23 not detecting card inserts.
    1. PCMCIA in 2.6.0 and 2.4.23 not detecting card
    inserts

    2. I am using pcmcia-cs-3.2.7. dmesg output (attached
    below) suggests that Yenta Sockets is active but when
    I insert any card, I hear no beeps, the output of
    /var/log/sys.log does
    not change and
    cardctl status
    says
    Socket 0:
    no card

    3. keywords: PCMCIA module

    4. output of /proc/version Linux version 2.6.0
    (root@localhost) (gcc version 3.3.2) #6 Sat Jan 3
    16:52:54 CST 2004

    7.1 output of scripts/ver_linux
    Gnu C 3.3.2
    Gnu make 3.80
    util-linux 2.12
    mount 2.12
    module-init-tools 3.0-pre3
    e2fsprogs 1.34
    pcmcia-cs 3.2.7
    PPP 2.4.1
    Linux C Library 2.3.2
    Dynamic linker (ldd) 2.3.2
    Linux C++ Library 5.0.5
    Procps 3.1.15
    Net-tools 1.60
    Kbd 1.08
    Sh-utils 5.0
    Modules Loaded snd_intel8x0 snd_ac97_codec
    snd_pcm snd_timer snd_page_alloc snd_mpu401_uart
    snd_rawmidi snd_seq_device sis900 crc32 nvidia ds
    yenta_socket pcmcia_core

    7.2 output of /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 15
    model : 2
    model name : Intel(R) Pentium(R) 4 CPU 2.40GHz
    stepping : 7
    cpu MHz : 2390.695
    cache size : 512 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8
    apic sep mtrr pge mca cmov pat pse36 clflush dts acpi
    mmx fxsr sse sse2 ss ht tm pbe cid
    bogomips : 4718.59

    7.3 output of /proc/modules
    snd_intel8x0 28164 0 - Live 0xf8a22000
    snd_ac97_codec 50948 1 snd_intel8x0, Live 0xf8a61000
    snd_pcm 84004 1 snd_intel8x0, Live 0xf8a4b000
    snd_timer 20996 1 snd_pcm, Live 0xf8a2a000
    snd_page_alloc 9092 2 snd_intel8x0,snd_pcm, Live
    0xf8a1e000
    snd_mpu401_uart 6144 1 snd_intel8x0, Live 0xf8a09000
    snd_rawmidi 20000 1 snd_mpu401_uart, Live 0xf8a13000
    snd_seq_device 6536 1 snd_rawmidi, Live 0xf8a01000
    sis900 16644 0 - Live 0xf8a0d000
    crc32 4096 1 sis900, Live 0xf8a04000
    nvidia 2069736 14 - Live 0xf8b2f000
    ds 10884 2 - Live 0xf88cb000
    yenta_socket 14336 0 - Live 0xf88cf000
    pcmcia_core 60768 2 ds,yenta_socket, Live 0xf88db000

    7.4.1 output of /proc/ioports
    0000-001f : dma1
    0020-0021 : pic1
    0040-005f : timer
    0060-006f : keyboard
    0070-0077 : rtc
    0080-008f : dma page reg
    00a0-00a1 : pic2
    00c0-00df : dma2
    00f0-00ff : fpu
    0170-0177 : ide1
    01f0-01f7 : ide0
    0376-0376 : ide1
    0378-037a : parport0
    03c0-03df : vga+
    03f6-03f6 : ide0
    03f8-03ff : serial
    0c00-0c1f : 0000:00:02.1
    0cf8-0cff : PCI conf1
    4000-40ff : PCI CardBus #02
    4400-44ff : PCI CardBus #02
    cc00-ccff : 0000:00:04.0
    cc00-ccff : sis900
    d000-d07f : 0000:00:02.6
    d400-d4ff : 0000:00:02.6
    d800-d87f : 0000:00:02.7
    d800-d83f : SiS SI7012 - Controller
    dc00-dcff : 0000:00:02.7
    dc00-dcff : SiS SI7012 - AC'97
    ff00-ff0f : 0000:00:02.5

    7.4.2 output of /proc/iomem
    00000000-0009fbff : System RAM
    0009fc00-0009ffff : reserved
    000a0000-000bffff : Video RAM area
    000c0000-000c7fff : Video ROM
    000f0000-000fffff : System ROM
    00100000-3ffeffff : System RAM
    00100000-0028d7d6 : Kernel code
    0028d7d7-00340dff : Kernel data
    3fff0000-3fff0fff : 0000:00:08.0
    3fff0000-3fff0fff : yenta_socket
    40000000-403fffff : PCI CardBus #02
    40400000-407fffff : PCI CardBus #02
    c5b00000-d5cfffff : PCI Bus #01
    c8000000-cfffffff : 0000:01:00.0
    d5c80000-d5cfffff : 0000:01:00.0
    d5e00000-d7efffff : PCI Bus #01
    d6000000-d6ffffff : 0000:01:00.0
    dbffa000-dbffafff : 0000:00:04.0
    dbffa000-dbffafff : sis900
    dbffb000-dbffbfff : 0000:00:03.0
    dbffc000-dbffcfff : 0000:00:03.1
    dbffd000-dbffdfff : 0000:00:03.2
    dbffe000-dbffefff : 0000:00:03.3
    dbfff000-dbffffff : 0000:00:02.3
    dc000000-dfffffff : 0000:00:00.0

    7.5 output of lspci -vvv
    00:00.0 Host bridge: Silicon Integrated Systems [SiS]
    SiS645DX Host & Memory & AGP Controller (rev 01)
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 64
    Region 0: Memory at dc000000 (32-bit,
    non-prefetchable) [size=64M]
    Capabilities: [c0] AGP version 2.0
    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+
    ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
    Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+
    GART64- 64bit- FW- Rate=x4

    00:01.0 PCI bridge: Silicon Integrated Systems [SiS]
    5591/5592 AGP (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
    DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Bus: primary=00, secondary=01, subordinate=01,
    sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: d5e00000-d7efffff
    Prefetchable memory behind bridge:
    c5b00000-d5cfffff
    BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort-
    >Reset- FastB2B-

    00:02.0 ISA bridge: Silicon Integrated Systems [SiS]
    SiS962 [MuTIOL Media IO] (rev 14)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+
    MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0

    00:02.1 SMBus: Silicon Integrated Systems [SiS]:
    Unknown device 0016
    Control: I/O+ Mem- BusMaster- SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin B routed to IRQ 17
    Region 4: I/O ports at 0c00 [size=32]

    00:02.3 FireWire (IEEE 1394): Silicon Integrated
    Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
    Subsystem: Uniwill Computer Corp: Unknown
    device 7007
    Control: I/O- Mem+ BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (1000ns min, 3000ns max)
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at dbfff000 (32-bit,
    non-prefetchable) [size=4K]
    Expansion ROM at dbfc0000 [disabled]
    [size=128K]
    Capabilities: [64] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+
    AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0
    PME-

    00:02.5 IDE interface: Silicon Integrated Systems
    [SiS] 5513 [IDE] (prog-if 80 [Master])
    Subsystem: Uniwill Computer Corp: Unknown
    device 5513
    Control: I/O+ Mem- BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 128
    Region 4: I/O ports at ff00 [size=16]

    00:02.6 Modem: Silicon Integrated Systems [SiS] Intel
    537 [56k Winmodem] (rev a0) (prog-if 00 [Generic])
    Subsystem: Uniwill Computer Corp: Unknown
    device 4003
    Control: I/O+ Mem- BusMaster- SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin C routed to IRQ 18
    Region 0: I/O ports at d400 [size=256]
    Region 1: I/O ports at d000 [size=128]
    Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+
    AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0
    PME-

    00:02.7 Multimedia audio controller: Silicon
    Integrated Systems [SiS] SiS7012 PCI Audio Accelerator
    (rev a0)
    Subsystem: Uniwill Computer Corp: Unknown
    device 5101
    Control: I/O+ Mem- BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (13000ns min, 2750ns max)
    Interrupt: pin C routed to IRQ 18
    Region 0: I/O ports at dc00 [size=256]
    Region 1: I/O ports at d800 [size=128]
    Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+
    AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0
    PME-

    00:03.0 USB Controller: Silicon Integrated Systems
    [SiS] 7001 (rev 0f) (prog-if 10 [OHCI])
    Subsystem: Uniwill Computer Corp: Unknown
    device 7001
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Latency: 64 (20000ns max), cache line size 08
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at dbffb000 (32-bit,
    non-prefetchable) [size=4K]

    00:03.1 USB Controller: Silicon Integrated Systems
    [SiS] 7001 (rev 0f) (prog-if 10 [OHCI])
    Subsystem: Uniwill Computer Corp: Unknown
    device 7001
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Latency: 64 (20000ns max), cache line size 08
    Interrupt: pin B routed to IRQ 21
    Region 0: Memory at dbffc000 (32-bit,
    non-prefetchable) [size=4K]

    00:03.2 USB Controller: Silicon Integrated Systems
    [SiS] 7001 (rev 0f) (prog-if 10 [OHCI])
    Subsystem: Uniwill Computer Corp: Unknown
    device 7001
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Latency: 64 (20000ns max), cache line size 08
    Interrupt: pin C routed to IRQ 22
    Region 0: Memory at dbffd000 (32-bit,
    non-prefetchable) [size=4K]

    00:03.3 USB Controller: Silicon Integrated Systems
    [SiS] SiS7002 USB 2.0 (prog-if 20 [EHCI])
    Subsystem: Uniwill Computer Corp: Unknown
    device 7002
    Control: I/O- Mem+ BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (20000ns max), cache line size 08
    Interrupt: pin D routed to IRQ 23
    Region 0: Memory at dbffe000 (32-bit,
    non-prefetchable) [size=4K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2-
    AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0
    PME-

    00:04.0 Ethernet controller: Silicon Integrated
    Systems [SiS] SiS900 10/100 Ethernet (rev 91)
    Subsystem: Uniwill Computer Corp: Unknown
    device 5100
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (13000ns min, 2750ns max)
    Interrupt: pin A routed to IRQ 19
    Region 0: I/O ports at cc00 [size=256]
    Region 1: Memory at dbffa000 (32-bit,
    non-prefetchable) [size=4K]
    Expansion ROM at dbfa0000 [disabled]
    [size=128K]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+
    AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0
    PME-

    00:08.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus
    Controller
    Subsystem: Uniwill Computer Corp: Unknown
    device 3000
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
    DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 168
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at 3fff0000 (32-bit,
    non-prefetchable) [size=4K]
    Bus: primary=00, secondary=02, subordinate=05,
    sec-latency=176
    Memory window 0: 40000000-403ff000
    (prefetchable)
    Memory window 1: 40400000-407ff000
    I/O window 0: 00004000-000040ff
    I/O window 1: 00004400-000044ff
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort-
    >Reset- 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001

    01:00.0 VGA compatible controller: nVidia Corporation
    NV17 [GeForce4 440 Go 64M] (rev a3) (prog-if 00 [VGA])
    Subsystem: Uniwill Computer Corp: Unknown
    device 2241
    Control: I/O+ Mem+ BusMaster+ SpecCycle-
    MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-
    DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 248 (1250ns min, 250ns max)
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at d6000000 (32-bit,
    non-prefetchable) [size=16M]
    Region 1: Memory at c8000000 (32-bit,
    prefetchable) [size=128M]
    Region 2: Memory at d5c80000 (32-bit,
    prefetchable) [size=512K]
    Expansion ROM at d7ee0000 [disabled]
    [size=128K]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI- D1- D2-
    AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0
    PME-
    Capabilities: [44] AGP version 2.0
    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA-
    ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
    Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+
    GART64- 64bit- FW- Rate=x4

    7.7 output of dmesg
    Linux version 2.6.0 (root@localhost) (gcc version
    3.3.2) #6 Sat Jan 3 16:52:54 CST 2004
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00
    (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000
    (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000
    (reserved)
    BIOS-e820: 0000000000100000 - 000000003fff0000
    (usable)
    BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI
    data)
    BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI
    NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000
    (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000
    (reserved)
    BIOS-e820: 00000000ffee0000 - 00000000fff0ffff
    (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000
    (reserved)
    user-defined physical RAM map:
    user: 0000000000000000 - 000000000009fc00 (usable)
    user: 000000000009fc00 - 00000000000a0000 (reserved)
    user: 00000000000f0000 - 0000000000100000 (reserved)
    user: 0000000000100000 - 000000003fff0000 (usable)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000fba70
    hm, page 000fb000 reserved twice.
    hm, page 000fc000 reserved twice.
    hm, page 000f6000 reserved twice.
    hm, page 000f7000 reserved twice.
    On node 0 totalpages: 262128
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 225280 pages, LIFO batch:16
    HighMem zone: 32752 pages, LIFO batch:7
    DMI 2.3 present.
    ACPI: RSDP (v000 AMI
    ) @ 0x000fa160
    ACPI: RSDT (v001 AMIINT SiS645XX 0x00000010 MSFT
    0x0100000b) @ 0x3fff0000
    ACPI: FADT (v002 AMIINT SiS645XX 0x00000011 MSFT
    0x0100000b) @ 0x3fff0030
    ACPI: MADT (v001 AMIINT SiS645XX 0x00001000 MSFT
    0x0100000b) @ 0x3fff00c0
    ACPI: DSDT (v001 SiS 645 0x00001000 MSFT
    0x0100000d) @ 0x00000000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000]
    global_irq_base[0x0])
    IOAPIC[0]: Assigned apic_id 2
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000,
    IRQ 0-23
    ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2]
    polarity[0x0] trigger[0x0])
    ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9]
    polarity[0x3] trigger[0x3])
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Building zonelist for node : 0
    Kernel command line: root=/dev/hda5 ro mem=1048512K
    Initializing CPU#0
    PID hash table entries: 4096 (order 12: 32768 bytes)
    Detected 2390.695 MHz processor.
    Console: colour VGA+ 80x25
    Memory: 1034492k/1048512k available (1589k kernel
    code, 13080k reserved, 717k data, 136k init, 131008k
    highmem)
    Calibrating delay loop... 4718.59 BogoMIPS
    Dentry cache hash table entries: 131072 (order: 7,
    524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6,
    262144 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096
    bytes)
    CPU: After generic identify, caps: bfebfbff
    00000000 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff
    00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: bfebfbff 00000000
    00000000 00000080
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU#0: Thermal monitoring enabled
    CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19,
    2-20, 2-21, 2-22, 2-23 not connected.
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    number of MP IRQ sources: 15.
    number of IO-APIC #2 registers: 24.
    testing the IO APIC.......................
    IO APIC #2......
    .... register #00: 02000000
    ....... : physical APIC id: 02
    ....... : Delivery Type: 0
    ....... : LTS : 0
    .... register #01: 00178011
    ....... : max redirection entries: 0017
    ....... : PRQ implemented: 1
    ....... : IO APIC version: 0011
    .... register #02: 02000000
    ....... : arbitration: 02
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 000 00 1 0 0 0 0 0 0 00
    01 001 01 0 0 0 0 0 1 1 39
    02 001 01 0 0 0 0 0 1 1 31
    03 001 01 0 0 0 0 0 1 1 41
    04 001 01 0 0 0 0 0 1 1 49
    05 001 01 0 0 0 0 0 1 1 51
    06 001 01 0 0 0 0 0 1 1 59
    07 001 01 0 0 0 0 0 1 1 61
    08 001 01 0 0 0 0 0 1 1 69
    09 001 01 1 1 0 1 0 1 1 71
    0a 001 01 0 0 0 0 0 1 1 79
    0b 001 01 0 0 0 0 0 1 1 81
    0c 001 01 0 0 0 0 0 1 1 89
    0d 001 01 0 0 0 0 0 1 1 91
    0e 001 01 0 0 0 0 0 1 1 99
    0f 001 01 0 0 0 0 0 1 1 A1
    10 000 00 1 0 0 0 0 0 0 00
    11 000 00 1 0 0 0 0 0 0 00
    12 000 00 1 0 0 0 0 0 0 00
    13 000 00 1 0 0 0 0 0 0 00
    14 000 00 1 0 0 0 0 0 0 00
    15 000 00 1 0 0 0 0 0 0 00
    16 000 00 1 0 0 0 0 0 0 00
    17 000 00 1 0 0 0 0 0 0 00
    IRQ to pin mappings:
    IRQ0 -> 0:2
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    .................................... done.
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 2389.0911 MHz.
    ..... host bus clock speed is 132.0772 MHz.
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last
    bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20031002
    IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9
    Mode:1 Active:1)
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    Uncovering SIS962 that hid as a SIS503 (compatible=1)
    Enabling SiS 96x SMBus.
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Embedded Controller [EC0] (gpe 11)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11
    12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11
    12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11
    12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11
    12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11
    12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11
    12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11
    12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11
    12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ
    16 Mode:1 Active:1)
    00:00:01[A] -> 2-16 -> IRQ 16
    IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ
    17 Mode:1 Active:1)
    00:00:01[B] -> 2-17 -> IRQ 17
    IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ
    18 Mode:1 Active:1)
    00:00:01[C] -> 2-18 -> IRQ 18
    IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ
    19 Mode:1 Active:1)
    00:00:01[D] -> 2-19 -> IRQ 19
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    IOAPIC[0]: Set PCI routing entry (2-20 -> 0xc9 -> IRQ
    20 Mode:1 Active:1)
    00:00:03[A] -> 2-20 -> IRQ 20
    IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ
    21 Mode:1 Active:1)
    00:00:03[B] -> 2-21 -> IRQ 21
    IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ
    22 Mode:1 Active:1)
    00:00:03[C] -> 2-22 -> IRQ 22
    IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ
    23 Mode:1 Active:1)
    00:00:03[D] -> 2-23 -> IRQ 23
    Pin 2-19 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-17 already programmed
    PCI: Using ACPI for IRQ routing
    PCI: if you experience problems, try using option
    'pci=noacpi' or even 'acpi=off'
    Machine check exception polling timer started.
    highmem bounce pool size: 64 pages
    ACPI: AC Adapter [AC0] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Lid Switch [LID]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: Processor [CPU1] (supports C1)
    ACPI: Thermal Zone [THRM] (75 C)
    pty: 256 Unix98 ptys configured
    request_module: failed /sbin/modprobe --
    parport_lowlevel. error = -16
    lp: driver loaded but no devices found
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.100 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports,
    IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
    parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
    parport0: irq 7 detected
    lp0: using parport0 (polling).
    Using anticipatory io scheduler
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    Uniform Multi-Platform E-IDE driver Revision:
    7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes;
    override with idebus=xx
    hda: TOSHIBA MK4018GAS, ATA DISK drive
    hdc: Slimtype COMBO LSC-24081, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 78140160 sectors (40007 MB), CHS=65535/16/63
    hda: hda1 hda3 hda4 < hda5 >
    hdc: ATAPI 8X DVD-ROM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.12
    mice: PS/2 mouse device common for all mice
    i8042.c: Detected active multiplexing controller, rev
    1.0.
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    input: PS/2 Synaptics TouchPad on isa0060/serio2
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    input: AT Translated Set 2 keyboard on isa0060/serio0
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Advanced Linux Sound Architecture Driver Version 0.9.7
    (Thu Sep 25 19:16:36 2003 UTC).
    ALSA device list:
    No soundcards found.
    NET: Registered protocol family 2
    IP: routing cache hash table of 8192 buckets, 64Kbytes
    TCP: Hash tables configured (established 262144 bind
    65536)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    PM: Reading pmdisk image.
    PM: Resume from disk failed.
    ACPI: (supports S0 S3 S4 S5)
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 136k freed
    Adding 1534196k swap on /dev/hda3. Priority:-1
    extents:1
    EXT3 FS on hda5, internal journal
    Linux Kernel Card Services
    options: [pci] [cardbus] [pm]
    Intel PCIC probe: not found.
    Yenta: CardBus bridge found at 0000:00:08.0
    [1584:3000]
    Yenta: ISA IRQ list 0000, PCI irq17
    Socket status: 4d41b401
    cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc1f
    cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x837
    0x840-0x87f 0x898-0x89f
    cs: IO port probe 0x0100-0x04ff: excluding 0x3c0-0x3df
    0x480-0x48f 0x4d0-0x4d7
    cs: IO port probe 0x0a00-0x0aff: clean.
    ACPI-0178: *** Warning: The ACPI AML in your
    computer contains errors, please nag the manufacturer
    to correct it.
    ACPI-0181: *** Warning: Allowing relaxed access to
    fields; turn on CONFIG_ACPI_DEBUG for details.
    nvidia: module license 'NVIDIA' taints kernel.
    0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel
    Module 1.0-5328 Wed Dec 17 13:54:51 PST 2003
    0: NVRM: AGPGART: unable to retrieve symbol table
    sis900.c: v1.08.06 9/24/2002
    eth0: Unknown PHY transceiver found at address 0.
    eth0: Realtek RTL8201 PHY transceiver found at address
    1.
    eth0: Unknown PHY transceiver found at address 2.
    eth0: Unknown PHY transceiver found at address 3.
    eth0: Unknown PHY transceiver found at address 4.
    eth0: Unknown PHY transceiver found at address 5.
    eth0: Unknown PHY transceiver found at address 6.
    eth0: Unknown PHY transceiver found at address 7.
    eth0: Unknown PHY transceiver found at address 8.
    eth0: Unknown PHY transceiver found at address 9.
    eth0: Unknown PHY transceiver found at address 10.
    eth0: Unknown PHY transceiver found at address 11.
    eth0: Unknown PHY transceiver found at address 12.
    eth0: Unknown PHY transceiver found at address 13.
    eth0: Unknown PHY transceiver found at address 14.
    eth0: Unknown PHY transceiver found at address 15.
    eth0: Unknown PHY transceiver found at address 16.
    eth0: Unknown PHY transceiver found at address 17.
    eth0: Unknown PHY transceiver found at address 18.
    eth0: Unknown PHY transceiver found at address 19.
    eth0: Unknown PHY transceiver found at address 20.
    eth0: Unknown PHY transceiver found at address 21.
    eth0: Unknown PHY transceiver found at address 22.
    eth0: Unknown PHY transceiver found at address 23.
    eth0: Unknown PHY transceiver found at address 24.
    eth0: Unknown PHY transceiver found at address 25.
    eth0: Unknown PHY transceiver found at address 26.
    eth0: Unknown PHY transceiver found at address 27.
    eth0: Unknown PHY transceiver found at address 28.
    eth0: Unknown PHY transceiver found at address 29.
    eth0: Unknown PHY transceiver found at address 30.
    eth0: Unknown PHY transceiver found at address 31.
    eth0: Using transceiver found at address 31 as default
    eth0: SiS 900 PCI Fast Ethernet at 0xcc00, IRQ 19, xx:xx:xx:xx:xx:xx

    ________________________________________________________________________
    Yahoo! India Mobile: Download the latest polyphonic ringtones.
    Go to http://in.mobile.yahoo.com
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:59    [W:0.063 / U:59.616 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site