lkml.org 
[lkml]   [2004]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.2-rc2-mm1 now boots, 2.6.2-rc? doesn't

Hi Andrew,

Thank you for your -mm1 patch to 2.6.2-rc2, I've now got my system up
and running again. I'm not sure where the problem was, since I didn't
find the problem point after sprinkling a bunch of AAA(); debugging
printks() all over the stuff in arch/i386/kernel/setup.c and some
other files in there as well.

Would it make sense for me to try and work backwards from the -mm1 and
see which patch(es) makes the difference?

One thing I notice is that now my interrupts are all on just one
processor:

> cat /proc/interrupts CPU0 CPU1
0: 59000197 20 IO-APIC-edge timer
1: 1867 1 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
8: 3 1 IO-APIC-edge rtc
11: 1 0 IO-APIC-edge Cyclom-Y
12: 703 1 IO-APIC-edge i8042
14: 281 0 IO-APIC-edge ide0
16: 42762 3 IO-APIC-level ide2, ide3, ohci_hcd
17: 183325 1 IO-APIC-level ehci_hcd, eth0
18: 119211 1 IO-APIC-level aic7xxx, aic7xxx, Ensoniq AudioPCI
19: 0 0 IO-APIC-level ohci_hcd
NMI: 0 0
LOC: 58999640 58999802
ERR: 0
MIS: 26

Should I think about using that daemon to move interrupts around?
Gotta go find the pointer to that stuff again.

Thanks again Andrew!

John
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.044 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site