![]() | |||||||||||||
Messages in this thread |
Hi. > I just bought the Soyo KT600 Dragon Ultra Platinum Edition > http://www.soyousa.com/products/proddesc.php?id=280 > The below lspci and dmesg output appears to be telling me that the > motherboard has: > REPORTED > ======== > KT400 > 8 usb 1.1 ports > 2 usb 2.0 ports > > IN THE MOTHERBOARD SPEC > ======================= > KT600 > 8 usb 2.0 ports > 0 usb 1.1 ports > > I am not much of a kernel guru and know zero about USB. Can someone > explain this to me? Is it a kernel issue of misidentifying hardware? > Did someone put the wrong motherboard in the box? I tried looking at > the kt600/kt400 chips under the fan/heatsink but the darn thing seems to > be glued onto the motherboard. The fan/heatsink wasn't glued to my boards at least (I have two of those). You just have to squeeze the plastic things on the back of the board and it'll go off. I had a fan on mine. You? All ports are USB 2.0. What you're missing is that you (afaik) use UHCI to talk to USB 1.1 devices (1.5 and 12Mbit/s) and EHCI to talk to USB 2.0 devices (up to 480Mbit/s). It should just work out of the box. Try inserting a USB 2.0 device into each port and see what it says. It works as USB 2 here with my Creative Zen NX and I tried a few ports. THe only thing that isn't USB2 is the card reader package that you got in the box. It's USB1.1 only. // Stefan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2005-03-22 13:00 [W:0.957 / U:0.040 seconds] ©2003-2008 Jasper Spaans | |||||||||||||