![]() | |||||||||||||
Messages in this thread |
---- [ 881183 ] ice1712 rattle noise with 1.0.1 ( kernel 2.6.1) ---- Device: STaudio DSP2000 Problem: All outputs make a rattling noise, peaking to the max levels, with alsa drivers 1.0.1 form kernel 2.6.1 Steps to reproduce: 1) Configure and install alsa drivers form Kernel 2.6.1 for PCI card ice1712 2) Play something with aplay, xmms or try run jackd 3) observe rattling noise. ( Ratling noise pitch increases with sampling frequency. Workaround: Use the same alsa options you selected in the kernel, with kernel 2.6.0 ( alsa 0.9.7 ) Summary: ICE1712 works correctly with older alsa drivers ( 0.9.7). New drivers generate a rattling oise in all outputs. Kernel options used in both cases: # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set Alsa libs tried: alsa-lib-1.0.0_rc2-r1 alsa-lib-0.9.8 alsa-lib-1.0.1 ( independently of which libraries you use, you get the same results ) Severity: High I gotta choose between having sound or kernel security updates. Portage 2.0.49-r15 (default-x86-1.4, gcc-3.2.3, glibc-2.3.2-r3, 2.6.0) ================================================================= System uname: 2.6.0 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz Gentoo Base System version 1.4.3.10 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CFLAGS="-march=i686 -mcpu=pentium3 -O3 -pipe -fomit-frame-pointer" CHOST="i686-pc-linux-gnu" COMPILER="gcc3" CONFIG_PROTECT="/etc /var/qmail/control /usr/kde/2/share/config /usr/kde/3/share/config /usr/X11R6/lib/X11/xkb /usr/kde/3.1/share/config /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/config" CONFIG_PROTECT_MASK="/etc/gconf /etc/env.d" CXXFLAGS="-march=i686 -mcpu=pentium3 -O3 -pipe -fomit-frame-pointer" DISTDIR="/usr/portage/distfiles" FEATURES="sandbox ccache autoaddcvs" GENTOO_MIRRORS="http://cudlug.cudenver.edu/gentoo/ http://mirror.tucdemonic.org/gentoo/ http://gentoo.ccccom.com ftp://gentoo.ccccom.com" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 oss apm avi crypt cups encode foomaticdb gif gtk2 jpeg gnome libg++ mad mikmod mpeg ncurses nls pdflib png quicktime spell truetype xml2 xmms xv zlib gtkhtml gdbm berkdb slang readline arts tetex bonobo svga tcltk guile X sdl gpm tcpd pam libwww ssl perl python esd imlib oggvorbis gtk motif opengl mozilla cdr scanner qt kde alsa jack ladspa" cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.40GHz stepping : 9 cpu MHz : 2406.185 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 4751.36 lspci -vvv 00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 80f6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [2106] Capabilities: [a0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=2 SBA- AGP+ GART64- 64bit- FW- Rate=x8 00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fc800000-fe8fffff Prefetchable memory behind bridge: dff00000-efefffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at ef00 [size=32] 00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 7 Region 4: I/O ports at ef20 [size=32] 00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 5 Region 4: I/O ports at ef40 [size=32] 00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at ef80 [size=32] 00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) (prog-if 20 [EHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [20a0] 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: SERR BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 0400 [size=32] 00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 80f3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at ee80 [size=64] Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA]) Subsystem: Asustek Computer, Inc.: Unknown device 80cf Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=32 ArqSz=2 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x8 02:01.0 Ethernet controller: Intel Corp.: Unknown device 1019 Subsystem: Asustek Computer, Inc.: Unknown device 80f7 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (63750ns min), cache line size 04 Interrupt: pin A routed to IRQ 5 Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at cf80 [size=32] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- 03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 808a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), cache line size 04 Interrupt: pin A routed to IRQ 5 Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at dc00 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:04.0 RAID bus controller: Promise Technology, Inc.: Unknown device 3373 (rev 02) Subsystem: Asustek Computer, Inc.: Unknown device 80f5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 240 (1000ns min, 4500ns max), cache line size 90 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at df00 [size=64] Region 1: I/O ports at dfa0 [size=16] Region 2: I/O ports at d880 [size=128] Region 3: Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at feac0000 (32-bit, non-prefetchable) [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:0b.0 Multimedia audio controller: IC Ensemble Inc ICE1712 [Envy24] (rev 02) Subsystem: IC Ensemble Inc ICE1712 [Envy24] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at df80 [size=32] Region 1: I/O ports at df60 [size=16] Region 2: I/O ports at df50 [size=16] Region 3: I/O ports at de80 [size=64] Capabilities: [80] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2005-03-22 13:00 [from the cache] ©2003-2008 | |||||||||||||