lkml.org 
[lkml]   [2004]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] i2c driver fixes for 2.6.1
Date
From
ChangeSet 1.1474.98.23, 2004/01/19 12:52:59-08:00, khali@linux-fr.org

[PATCH] I2C: New driver: w83l785ts

Here is a patch that adds a new chip driver to Linux 2.6.1 (+ previous
patches). The w83l785ts driver handles a single chipset, the Winbond
W83L785TS-S. I am the author of the original driver as found in
lm_sensors 2.8.3. Wolfgang Ziegler AKA fago made an initial port to
Linux 2.6, which I reviewed, and here it is.


drivers/i2c/chips/Kconfig | 12 +
drivers/i2c/chips/Makefile | 1
drivers/i2c/chips/w83l785ts.c | 309 ++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c-id.h | 1
4 files changed, 323 insertions(+)


diff -Nru a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
--- a/drivers/i2c/chips/Kconfig Mon Jan 19 15:28:47 2004
+++ b/drivers/i2c/chips/Kconfig Mon Jan 19 15:28:47 2004
@@ -137,4 +137,16 @@
This driver can also be built as a module. If so, the module
will be called w83781d.

+config SENSORS_W83L785TS
+ tristate "Winbond W83L785TS-S"
+ depends on I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for the Winbond W83L785TS-S
+ sensor chip, which is used on the Asus A7N8X, among other
+ motherboards.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83l785ts.
+
endmenu
diff -Nru a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
--- a/drivers/i2c/chips/Makefile Mon Jan 19 15:28:47 2004
+++ b/drivers/i2c/chips/Makefile Mon Jan 19 15:28:47 2004
@@ -15,3 +15,4 @@
obj-$(CONFIG_SENSORS_LM85) += lm85.o
obj-$(CONFIG_SENSORS_LM90) += lm90.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
+obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
diff -Nru a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/chips/w83l785ts.c Mon Jan 19 15:28:47 2004
@@ -0,0 +1,309 @@
+/*
+ * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+ *
+ * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
+ * by Winbond. It reports a single external temperature with a 1 deg
+ * resolution and a 3 deg accuracy. Datasheet can be obtained from
+ * Winbond's website at:
+ * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
+ *
+ * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare
+ * <khali@linux-fr.org>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/*
+ * Address to scan
+ * Address is fully defined internally and cannot be changed.
+ */
+
+static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(w83l785ts);
+
+/*
+ * The W83L785TS-S registers
+ * Manufacturer ID is 0x5CA3 for Winbond.
+ */
+
+#define W83L785TS_REG_MAN_ID1 0x4D
+#define W83L785TS_REG_MAN_ID2 0x4C
+#define W83L785TS_REG_CHIP_ID 0x4E
+#define W83L785TS_REG_CONFIG 0x40
+#define W83L785TS_REG_TYPE 0x52
+#define W83L785TS_REG_TEMP 0x27
+#define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */
+
+/*
+ * Conversions
+ * The W83L785TS-S uses signed 8-bit values.
+ */
+
+#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int w83l785ts_attach_adapter(struct i2c_adapter *adapter);
+static int w83l785ts_detect(struct i2c_adapter *adapter, int address,
+ int kind);
+static int w83l785ts_detach_client(struct i2c_client *client);
+static void w83l785ts_update_client(struct i2c_client *client);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver w83l785ts_driver = {
+ .owner = THIS_MODULE,
+ .name = "w83l785ts",
+ .id = I2C_DRIVERID_W83L785TS,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = w83l785ts_attach_adapter,
+ .detach_client = w83l785ts_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct w83l785ts_data {
+
+ struct semaphore update_lock;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+
+ /* registers values */
+ u8 temp, temp_over;
+};
+
+/*
+ * Internal variables
+ */
+
+static int w83l785ts_id = 0;
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_temp(struct device *dev, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83l785ts_data *data = i2c_get_clientdata(client);
+ w83l785ts_update_client(client);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+}
+
+static ssize_t show_temp_over(struct device *dev, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83l785ts_data *data = i2c_get_clientdata(client);
+ w83l785ts_update_client(client);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
+}
+
+static DEVICE_ATTR(temp_input, S_IRUGO, show_temp, NULL)
+static DEVICE_ATTR(temp_max, S_IRUGO, show_temp_over, NULL)
+
+/*
+ * Real code
+ */
+
+static int w83l785ts_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_ADAP_CLASS_SMBUS))
+ return 0;
+ return i2c_detect(adapter, &addr_data, w83l785ts_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *new_client;
+ struct w83l785ts_data *data;
+ int err = 0;
+ const char *name = "";
+
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ goto exit;
+
+ if (!(new_client = kmalloc(sizeof(struct i2c_client) +
+ sizeof(struct w83l785ts_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ memset(new_client, 0x00, sizeof(struct i2c_client) +
+ sizeof(struct w83l785ts_data));
+
+
+ /* The W83L785TS-specific data is placed right after the common I2C
+ * client data. */
+ data = (struct w83l785ts_data *) (new_client + 1);
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &w83l785ts_driver;
+ new_client->flags = 0;
+
+ /*
+ * Now we do the remaining detection. A negative kind means that
+ * the driver was loaded with no force parameter (default), so we
+ * must both detect and identify the chip (actually there is only
+ * one possible kind of chip for now, W83L785TS-S). A zero kind means
+ * that the driver was loaded with the force parameter, the detection
+ * step shall be skipped. A positive kind means that the driver
+ * was loaded with the force parameter and a given kind of chip is
+ * requested, so both the detection and the identification steps
+ * are skipped.
+ */
+ if (kind < 0) { /* detection */
+ if (((i2c_smbus_read_byte_data(new_client,
+ W83L785TS_REG_CONFIG) & 0x80) != 0x00)
+ || ((i2c_smbus_read_byte_data(new_client,
+ W83L785TS_REG_TYPE) & 0xFC) != 0x00)) {
+ dev_dbg(&adapter->dev,
+ "W83L785TS-S detection failed at 0x%02x.\n",
+ address);
+ goto exit_free;
+ }
+ }
+
+ if (kind <= 0) { /* identification */
+ u16 man_id;
+ u8 chip_id;
+
+ man_id = (i2c_smbus_read_byte_data(new_client,
+ W83L785TS_REG_MAN_ID1) << 8) +
+ i2c_smbus_read_byte_data(new_client,
+ W83L785TS_REG_MAN_ID2);
+ chip_id = i2c_smbus_read_byte_data(new_client,
+ W83L785TS_REG_CHIP_ID);
+
+ if (man_id == 0x5CA3) { /* Winbond */
+ if (chip_id == 0x70) { /* W83L785TS-S */
+ kind = w83l785ts;
+ name = "w83l785ts";
+ }
+ }
+
+ if (kind <= 0) { /* identification failed */
+ dev_info(&adapter->dev,
+ "Unsupported chip (man_id=0x%04X, "
+ "chip_id=0x%02X).\n", man_id, chip_id);
+ goto exit_free;
+ }
+ }
+
+ /* We can fill in the remaining client fields. */
+ strlcpy(new_client->name, name, I2C_NAME_SIZE);
+ new_client->id = w83l785ts_id++;
+ data->valid = 0;
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived. */
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_free;
+
+ /*
+ * Initialize the W83L785TS chip
+ * Nothing yet, assume it is already started.
+ */
+
+ /* Register sysfs hooks */
+ device_create_file(&new_client->dev, &dev_attr_temp_input);
+ device_create_file(&new_client->dev, &dev_attr_temp_max);
+
+ return 0;
+
+exit_free:
+ kfree(new_client);
+exit:
+ return err;
+}
+
+static int w83l785ts_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev, "Client deregistration failed, "
+ "client not detached.\n");
+ return err;
+ }
+
+ kfree(client);
+ return 0;
+}
+
+static void w83l785ts_update_client(struct i2c_client *client)
+{
+ struct w83l785ts_data *data = i2c_get_clientdata(client);
+
+ down(&data->update_lock);
+
+ if (!data->valid
+ || (jiffies - data->last_updated > HZ * 2)
+ || (jiffies < data->last_updated)) {
+ dev_dbg(&client->dev, "Updating w83l785ts data.\n");
+ data->temp = i2c_smbus_read_byte_data(client,
+ W83L785TS_REG_TEMP);
+ data->temp_over = i2c_smbus_read_byte_data(client,
+ W83L785TS_REG_TEMP_OVER);
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+}
+
+static int __init sensors_w83l785ts_init(void)
+{
+ return i2c_add_driver(&w83l785ts_driver);
+}
+
+static void __exit sensors_w83l785ts_exit(void)
+{
+ i2c_del_driver(&w83l785ts_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("W83L785TS-S driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83l785ts_init);
+module_exit(sensors_w83l785ts_exit);
diff -Nru a/include/linux/i2c-id.h b/include/linux/i2c-id.h
--- a/include/linux/i2c-id.h Mon Jan 19 15:28:47 2004
+++ b/include/linux/i2c-id.h Mon Jan 19 15:28:47 2004
@@ -156,6 +156,7 @@
#define I2C_DRIVERID_LM83 1040
#define I2C_DRIVERID_LM90 1042
#define I2C_DRIVERID_ASB100 1043
+#define I2C_DRIVERID_W83L785TS 1047

/*
* ---- Adapter types ----------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.073 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site