Messages in this thread |  | | | Date | Sun, 18 Jan 2004 17:45:58 +0100 | | From | Francesco Piano <> | | Subject | PROBLEM: kernel 2.6.1 strange message |
| |
Hi, sometimes running Kernel 2.6.1 I get this message on login:
Jan 18 12:14:28 knopy kernel: request_module: failed /sbin/modprobe -- char-major-4-64. error = 256 Jan 18 12:14:28 knopy modprobe: FATAL: Error running install command for serial Jan 18 12:14:29 knopy last message repeated 6 times Jan 18 12:14:29 knopy kernel: request_module: failed /sbin/modprobe -- char-major-188-8. error = 256 Jan 18 12:14:30 knopy /usr/sbin/cron[556]: (CRON) INFO (pidfile fd = 3) Jan 18 12:14:30 knopy /usr/sbin/cron[557]: (CRON) STARTUP (fork ok) Jan 18 12:14:30 knopy /usr/sbin/cron[557]: (CRON) INFO (Running @reboot jobs) Jan 18 12:14:30 knopy /USR/SBIN/CRON[565]: (root) CMD ( if [ -x /usr/sbin/logcheck ]; then nice -n10 /usr/sbin/logcheck -R; fi) Jan 18 12:14:45 knopy pppoe[177]: Timeout waiting for PADO packets Jan 18 12:14:45 knopy kernel: Badness in local_bh_enable at kernel/softirq.c:121 Jan 18 12:14:45 knopy pppd[157]: Modem hangup Jan 18 12:14:45 knopy pppd[157]: Connection terminated. Jan 18 12:14:45 knopy kernel: Call Trace: Jan 18 12:14:45 knopy kernel: [<c0124f3d>] local_bh_enable+0x8d/0x90 Jan 18 12:14:45 knopy kernel: [<e1a7ac12>] ppp_async_push+0xa2/0x1a0 [ppp_async] Jan 18 12:14:45 knopy kernel: [<c0167582>] __lookup_hash+0x72/0xe0 Jan 18 12:14:45 knopy kernel: [<e1a7a4d1>] ppp_asynctty_wakeup+0x31/0x70 [ppp_async] Jan 18 12:14:45 knopy kernel: [<c0241679>] pty_unthrottle+0x59/0x60 Jan 18 12:14:45 knopy kernel: [<c023dda8>] check_unthrottle+0x38/0x40 Jan 18 12:14:45 knopy kernel: [<c023de53>] n_tty_flush_buffer+0x13/0x60 Jan 18 12:14:45 knopy kernel: [<c0241a6d>] pty_flush_buffer+0x6d/0x70 Jan 18 12:14:45 knopy kernel: [<c023a57d>] do_tty_hangup+0x43d/0x4a0 Jan 18 12:14:45 knopy kernel: [<c023bb37>] release_dev+0x677/0x6d0 Jan 18 12:14:45 knopy kernel: [<c014930b>] unmap_page_range+0x4b/0x80 Jan 18 12:14:45 knopy kernel: [<c016fdd0>] dput+0x30/0x240 Jan 18 12:14:45 knopy kernel: [<c023bf5a>] tty_release+0x2a/0x70 Jan 18 12:14:45 knopy kernel: [<c0159aea>] __fput+0xba/0xd0 Jan 18 12:14:45 knopy kernel: [<c0158159>] filp_close+0x59/0x90 Jan 18 12:14:45 knopy kernel: [<c01226bc>] put_files_struct+0x6c/0xe0 Jan 18 12:14:45 knopy kernel: [<c0123377>] do_exit+0x197/0x360 Jan 18 12:14:45 knopy kernel: [<c012362b>] do_group_exit+0x7b/0xc0 Jan 18 12:14:45 knopy kernel: [<c010b4db>] syscall_call+0x7/0xb
Output of ver_linux:
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux knopy 2.6.1 #3 Sat Jan 17 20:42:06 CET 2004 i686 GNU/Linux
Gnu C 3.2.3 Gnu make 3.80 util-linux 2.11z mount 2.11x module-init-tools 3.0-pre5 e2fsprogs 1.34-WIP jfsutils 1.1.2 xfsprogs 2.5.3 pcmcia-cs 3.2.2 quota-tools 3.10. PPP 2.4.1 nfs-utils 1.0.5 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.9 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0.91 Modules Loaded nls_iso8859_1 ppp_deflate zlib_deflate bsd_comp nfsd exportfs ipt_ULOG ipt_pkttype ipt_TCPMSS ipt_length iptable_mangle ppp_async ppp_generic slhc via_rhine ipt_conntrack ipt_ttl ipt_dscp ipt_ecn ipt_tos ipt_mark ipt_TOS ipt_MASQUERADE ip_nat_amanda ip_nat_snmp_basic ip_nat_irc ip_nat_ftp iptable_nat ipt_limit ipt_owner ipt_state ipt_REJECT ipt_mac ipt_multiport ip_queue ip_conntrack_irc ip_conntrack_amanda ip_conntrack_ftp ip_conntrack iptable_filter ip_tables ntfs emu10k1 sound ac97_codec soundcore rtc
Distro: Knoppix Debian GNU/Linux 3.3
knoppix@knopy:/usr/src/linux-2.6.0/scripts$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Celeron (Coppermine) stepping : 10 cpu MHz : 1010.204 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1998.84
knoppix@knopy:/usr/src/linux-2.6.0/scripts$ cat /proc/modules nls_iso8859_1 3520 - - Live 0xe5efc000 ppp_deflate 4576 - - Live 0xe1aac000 zlib_deflate 21560 - - Live 0xe1ab3000 bsd_comp 5216 - - Live 0xe1a9e000 nfsd 94320 - - Live 0xe1aba000 exportfs 4928 - - Live 0xe1a9b000 ipt_ULOG 5256 - - Live 0xe1a92000 ipt_pkttype 1056 - - Live 0xe1a8d000 ipt_TCPMSS 3328 - - Live 0xe1a80000 ipt_length 1120 - - Live 0xe1a89000 iptable_mangle 1888 - - Live 0xe198c000 ppp_async 9248 - - Live 0xe1a7a000 ppp_generic 23016 - - Live 0xe1a82000 slhc 6048 - - Live 0xe1a6d000 via_rhine 18376 - - Live 0xe1a74000 ipt_conntrack 1856 - - Live 0xe1a6b000 ipt_ttl 1312 - - Live 0xe1a69000 ipt_dscp 1120 - - Live 0xe1a67000 ipt_ecn 1568 - - Live 0xe1a65000 ipt_tos 1056 - - Live 0xe1a63000 ipt_mark 1120 - - Live 0xe1a61000 ipt_TOS 1728 - - Live 0xe1a5f000 ipt_MASQUERADE 2816 - - Live 0xe1a58000 ip_nat_amanda 2108 - - Live 0xe1a56000 ip_nat_snmp_basic 10564 - - Live 0xe1a5b000 ip_nat_irc 3216 - - Live 0xe1a3c000 ip_nat_ftp 3920 - - Live 0xe19d8000 iptable_nat 19428 - - Live 0xe1a3f000 ipt_limit 1696 - - Live 0xe1a31000 ipt_owner 2912 - - Live 0xe198e000 ipt_state 1248 - - Live 0xe19c4000 ipt_REJECT 5504 - - Live 0xe1a34000 ipt_mac 1344 - - Live 0xe19c2000 ipt_multiport 1440 - - Live 0xe19c0000 ip_queue 8500 - - Live 0xe19d4000 ip_conntrack_irc 70100 - - Live 0xe1a1e000 ip_conntrack_amanda 68580 - - Live 0xe1a0c000 ip_conntrack_ftp 70932 - - Live 0xe19f9000 ip_conntrack 27904 - - Live 0xe19f1000 iptable_filter 1888 - - Live 0xe197d000 ip_tables 14288 - - Live 0xe19c6000 ntfs 86484 - - Live 0xe19da000 emu10k1 81636 - - Live 0xe1996000 sound 75148 - - Live 0xe19ac000 ac97_codec 16960 - - Live 0xe1990000 soundcore 6432 - - Live 0xe1986000 rtc 10440 - - Live 0xe1982000 knoppix@knopy:/usr/src/linux-2.6.0/scripts$ cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 9000-901f : 0000:00:1f.4 9000-901f : uhci_hcd 9400-941f : 0000:00:1f.2 9400-941f : uhci_hcd 9800-980f : 0000:00:1f.1 9800-9807 : ide0 9808-980f : ide1 a800-a8ff : 0000:02:0e.0 a800-a8ff : via-rhine b000-b0ff : 0000:02:0d.0 b000-b0ff : 8139too b400-b407 : 0000:02:0a.1 b800-b81f : 0000:02:0a.0 b800-b81f : EMU10K1 d000-dfff : PCI Bus #01 d800-d8ff : 0000:01:00.0 e800-e80f : 0000:00:1f.3 knoppix@knopy:/usr/src/linux-2.6.0/scripts$ cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-1ffeafff : System RAM 00100000-00353936 : Kernel code 00353937-004368ff : Kernel data 1ffeb000-1ffeefff : ACPI Tables 1ffef000-1fffefff : reserved 1ffff000-1fffffff : ACPI Non-volatile Storage ee000000-ee0000ff : 0000:02:0e.0 ee000000-ee0000ff : via-rhine ee800000-ee8000ff : 0000:02:0d.0 ee800000-ee8000ff : 8139too ef000000-efdfffff : PCI Bus #01 ef000000-ef07ffff : 0000:01:00.0 eff00000-f7ffffff : PCI Bus #01 f0000000-f7ffffff : 0000:01:00.0 f0000000-f0ffffff : vesafb f8000000-fbffffff : 0000:00:00.0 fec00000-fec0ffff : reserved fee00000-fee00fff : reserved fff80000-ffffffff : reserved root@knopy:/usr/src/linux-2.6.0/scripts# lspci -vvv 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04) Subsystem: Asustek Computer, Inc. TUSL2-C Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [88] #09 [e104] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ef000000-efdfffff Prefetchable memory behind bridge: eff00000-f7ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 05) (prog-if 00 [Normal dec ode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000bfff Memory behind bridge: ee000000-eeffffff Prefetchable memory behind bridge: efe00000-efefffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SER R+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) (prog-if 80 [Master]) Subsystem: Asustek Computer, Inc. TUSL2-C Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 0 Region 4: I/O ports at 9800 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 9400 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05) Subsystem: Asustek Computer, Inc. TUSL2-C Mainboard Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at e800 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 23 Region 4: I/O ports at 9000 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon 7200] (pro g-if 00 [VGA]) Subsystem: ATI Technologies Inc Radeon 7000/Radeon Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SER R- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at ef000000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at effe0000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- ) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04) Subsystem: Creative Labs CT4620 SBLive! Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at b800 [size=32] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- ) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 32 Region 0: I/O ports at b400 [size=8] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- ) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 1 0) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SER R- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at b000 [size=256] Region 1: Memory at ee800000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3col d+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0e.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86) Subsystem: VIA Technologies, Inc.: Unknown device 0105 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SER R- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort - >SERR- <PERR- Latency: 32 (750ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at a800 [size=256] Region 1: Memory at ee000000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+ ) Status: D0 PME-Enable- DSel=0 DScale=0 PME- root@knopy:/usr/src/linux-2.6.0/scripts# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TEAC Model: DV-W50D Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: YAMAHA Model: CRW2100E Rev: 1.0N Type: CD-ROM ANSI SCSI revision: 02
Thank to All Linux Developer
bye -- Francesco Piano - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |