lkml.org 
[lkml]   [2004]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: cdc-acm problems
From
Date
On Tue, 2004-01-13 at 23:05, Colin Leroy wrote:
> Hi,
>
> I have problems with cdc-acm killing ohci. I tried to narrow down the problem,
> but didn't get far.
> Basically `killall -HUP pppd` gives (in dmesg):
>
> drivers/usb/class/cdc-acm.c: acm_ctrl_irq - urb shutting down with status: -2
> ohci_hcd 0001:01:1b.1: OHCI Unrecoverable Error, disabled
> ohci_hcd 0001:01:1b.1: HC died; cleaning up

The above is interesting, looks like a PCI error. I keep getting those
unrecoverable errors with those new USB2 capable chips, I don't know
what's going on yet. Can try this patch and tell me what it dumps ?


===== drivers/usb/host/ohci-hcd.c 1.53 vs edited =====
--- 1.53/drivers/usb/host/ohci-hcd.c Wed Dec 31 15:25:17 2003
+++ edited/drivers/usb/host/ohci-hcd.c Wed Jan 14 13:20:52 2004
@@ -316,6 +316,11 @@
/* ASSERT: any requests/urbs are being unlinked */
/* ASSERT: nobody can be submitting urbs for this any more */

+ if (!HCD_IS_RUNNING (ohci->hcd.state)) {
+ ed->state = ED_IDLE;
+ finish_unlinks (ohci, 0, 0);
+ }
+
epnum <<= 1;
if (epnum != 0 && !(ep & USB_DIR_IN))
epnum |= 1;
@@ -571,9 +576,17 @@
disable (ohci);
ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
// e.g. due to PCI Master/Target Abort
+#if 1
+ if (hcd->pdev) {
+ u16 status;
+
+ pci_read_config_word(hcd->pdev, PCI_STATUS, &status);
+ printk(KERN_ERR "OHCI PCI Status: 0x%04x\n", status);
+ }
+#endif

ohci_dump (ohci, 1);
- hc_reset (ohci);
+ hc_reset (ohci);
}

if (ints & OHCI_INTR_WDH) {
===== drivers/usb/host/ohci-pci.c 1.20 vs edited =====
--- 1.20/drivers/usb/host/ohci-pci.c Tue Oct 28 15:36:00 2003
+++ edited/drivers/usb/host/ohci-pci.c Wed Jan 14 13:23:07 2004
@@ -36,6 +36,17 @@
int ret;

if (hcd->pdev) {
+#if 1
+ u16 status;
+
+ pci_read_config_word(hcd->pdev, PCI_STATUS, &status);
+ printk(KERN_ERR "OHCI PCI Status: 0x%04x\n", status);
+ if (status & 0xf900) {
+ printk(KERN_ERR "Initial error ! clearing ...\n");
+ pci_write_config_word(hcd->pdev, PCI_STATUS, status);
+ }
+#endif
+
ohci->hcca = pci_alloc_consistent (hcd->pdev,
sizeof *ohci->hcca, &ohci->hcca_dma);
if (!ohci->hcca)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.038 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site