Messages in this thread | | | Date | Wed, 14 Jan 2004 23:07:09 +0100 | From | Bart Samwel <> | Subject | Re: Hude read/write cache |
| |
Hi Jürgen,
You could take a look at laptop-mode. This a patch that defers disk writes, so that your disks can remain spun down for longer than just a couple of seconds. I've actually done the port of this patch to Linux 2.6 because I wanted to achieve exactly what you want to achieve. Be aware though that most HDs have a VERY LIMITED amount of spinups/spindowns in them, about 50K for most desktop drives (which translates to about once every two hours over a 6-year lifetime). This is why I've actually abandoned my original goal -- I couldn't get my spindown frequency below about twice per hour, so that would kill my drives. If you care for your drives and your data, make ABSOLUTELY SURE that your drive doesn't spin up more than once every two hours on average. And if you can't make that happen, don't do it, find a quiet drive+case+fan+etc instead. Good luck!
-- Bart
Jürgen Scholz wrote: > Hello! > > I got a small server, which main purpose is routing and dialup besides being > a repository for files. This system is very noisy. Because of that I want to > stop the disks from spinning, when the system is in regular usage (standby, > routing..). This should happen through a read and write cache which keeps > the most often used files in RAM (like log files, bash, ...), so that there > is no need for the system to access the (physical) hard drive. > I would like to use a regular filesystem with a sort of transparent cache. > Any ideas? > > Ciao, > Jürgen > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |