lkml.org 
[lkml]   [2004]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6: The hardware reports a non fatal, correctable incident occured on CPU 0.
Date
On Saturday 10 January 2004 00:12, Eric wrote:
> Check your hardware CPU/MOBO/RAM. Overheating? Bad Ram? Cheap mobo?
> MCE should not be triggered under any circumstances unless it is a kernel
> bug(RARE, I believe the MCE code is simple) or you REALLY have a hardware
> problem. As said before, the bios is resetting your fsb to 100 as a
> fail-safe because something bad happened.

Well, my system did run very stable and in the meantime again does run very
stable on both, 2.4.21 and Windows XP...

> BTW, check your setup, an AMD 2200+ should run at 1.8ghz i believe. If you

Yes.

> > What the fuck is going on here?? As far as I figured out this has
> > something to do with MCE (CONFIG_X86_MCE=y, CONFIG_X86_MCE_NONFATAL=y)
> > (?).
>
> Leave it enabled, its a good thing to tell you when you have bad hardware.
> Its not a kernel problem, but a feature.

Well, it is a good thing to tell me, but it's not a good thing to make my
system auto-reset itself before reaching the BIOS afterwards...

timo

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:1.213 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site