lkml.org 
[lkml]   [2003]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: Sensors and linux 2.6.0-test4-bk8 question
    From
    Date
    Ton Hospel replied to me
    |> I know libsensors is not yet 2.6 aware, but I thought sensed values
    |> where available in sysfs if one wanted to manually read them. Since I
    |> have via hardware:

    |If there is any interest, I have a perl program that does a configurable
    |display for 2.6.

    Sure there is interest:)

    |>
    |> Now there is no sensor-related message as far as I can see in my dmesg,
    |> and I do not seem to find any temperature/fan related info in /sys:
    |>

    |You still need the bus and chip drivers before anything appears.
    |Which ones is basically the same as with the old lmsensors stuff, so
    |look in their docs.

    But how can I check the damn things work ? Sensors writers seem to
    have eschewed the nice messages every other driver writer put in dmesg to
    tell me their stuff is correctly loaded.

    For example I have :
    "SMBus Via Pro adapter at 5000"

    in "/sys/devices/pci0000:00/0000:00:11.0/i2c-3/name" so I suppose via-pro
    at least is loaded (fully ?). Which should be the bus stuff I think. For
    the chip stuff that would be VIA686A (?) But how am I supposed to check the
    darn thing works with nothing in dmesg ? I've already combed sysfs for clues
    and found nothing.

    Regards,

    --
    Nicolas Mailhot
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2005-03-22 13:48    [W:5.764 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site