lkml.org 
[lkml]   [2003]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [linux-usb-devel] 2.6.0-test4 - PL2303 OOPS - see also 2.4.22: OOPS on disconnect PL2303 adapter
Date
On Saturday 06 September 2003 15:38, Jan-Benedict Glaw wrote:
> On Fri, 2003-09-05 16:08:52 -0700, Greg KH <greg@kroah.com>
> wrote in message <20030905230852.GA18196@kroah.com>:
> > On Wed, Sep 03, 2003 at 02:32:16PM +0800, Michael Frank wrote:
> > > On Wednesday 03 September 2003 07:52, Greg KH wrote:
> > > Besides it just stopping without obvious reason:
> > >
> > > 1) It does not like when something is typed on cu and not received by the serial port side
> > > connected to PL2303 (CTS low). It tends to hang and the trouble starts....
> > >
> > > Sep 3 12:52:15 mhfl2 kernel: ttyUSB0: 1 input overrun(s)
> > > Sep 3 12:54:30 mhfl2 last message repeated 2 times
> >
> > Hm, what is causing this?
> > That is probably why cu is getting confused, right?
>
> I've seen the input overrun message also (with the vanilla driver, not
> patched).
> It's effect is that the first bytes (maybe up to 100..300
> bytes) are scrambled. It's like accessing a serial link with a horribly
> wrong baud rate.

I have seen that too, but rarely. Most the time it hangs after the first
few hundred bytes.

>
> After a split-second, however, everything is okay and I start receiving
> valid NMEA data from my GPS receiver. For me, that's not much of a
> problem because nmea is checksum'ed and the bad bytes are ignored...
>

I have used PL2303 so far to grab serial console messages and did not
get in synch with cu after the overrun popped up.

Regards
Michael

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:48    [from the cache]
©2003-2011 Jasper Spaans. Advertise on this site