lkml.org 
[lkml]   [2003]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.5/2.6 PCMCIA Issues
OSDL <torvalds@osdl.org> wrote:
>
> Misha Nasledov wrote:
> >
> > I am attaching the dmesg output after booting 2.6.0-test2; this does
> > not include the insertion of the Orinoco card as the console freezes
> > immediately after the event. I inspected my logs after a reboot and
> > there were no messages whatsoever regarding the event of the insertion
> > of the Orinoco card.
>
> Can you try with PnP and the i82365 support _disabled_. I find this sequence
> very suspicious:
>
> Intel PCIC probe: PNP <6>pnp: Device 00:17 activated.
> invalid resources ?
> pnp: Device 00:17 disabled.
> not found.
>
> and I bet it messes up some of the register state that the yenta probe had
> just set up.
>
> You should try with just CONFIG_YENTA - the 82365 stuff is for the old
> 16-bit only controllers.

I have an IBM A21P which has the same problem.

The controller is a PCI1450 (rev 03)

The symptoms are that insertion of a PCMCIA or Cardbus card causes the
machine to lock up: it is calling yenta_interrupt() a zillion times per
second. Presumably the IRQ isn't getting cleared.

Disabling i82635 in config fixes it up.

2.5.70 does not lock up. 2.5.71 does lock up.

dmesg and .config are at

http://www.zip.com.au/~akpm/linux/patches/a21p-lockup/


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.061 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site