Messages in this thread | | | Date | Sun, 10 Aug 2003 23:06:34 -0700 | Subject | Re: VIA Serial ATA chipset | From | Misha Nasledov <> |
| |
On Mon, Aug 11, 2003 at 07:55:49AM +0200, Daniela Engert wrote: > It's looking very similar to the standard ATA host register model, so > it's probably nearly identical to existing VIA PATA controllers. To > check this we need to know the actual PCI config space. What does lspci > -s 0:f.0 -vvxx show?
Here is the output: 00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 80) Subsystem: VIA Technologies, Inc.: Unknown device 3149 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 8800 [size=8] Region 1: I/O ports at 8400 [size=4] Region 2: I/O ports at 8000 [size=8] Region 3: I/O ports at 7800 [size=4] Region 4: I/O ports at 7400 [size=16] Region 5: I/O ports at 7000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 49 31 07 00 90 02 80 00 04 01 00 20 80 00 10: 01 88 00 00 01 84 00 00 01 80 00 00 01 78 00 00 20: 01 74 00 00 01 70 00 00 00 00 00 00 06 11 49 31 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 01 00 00
Also, if SATA were to work, would there be any problem with accessing the hard disk? Currently, I have two onboard IDE channels, a PCI IDE card, and this SATA chip. I notice that the IDE hard disk devices only go up to hdh in /dev. Would I be able to use all 6 of my IDE channels? -- Misha Nasledov misha@nasledov.com http://nasledov.com/misha/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |