lkml.org 
[lkml]   [2003]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.4.21 IDE and IEEE1394+SBP2 regressions, orinoco_pci progress
> The IEEE1394+SBP2 driver combination in 2.4.21 has problems.  When the
> kernel is compiled for single-processor the SBP2 driver can't log into my
> SBP2 devices and hangs rmmod when the module is removed--in other words,
> it's useless. When compiled for SMP, the SBP2 driver works more or less
> normally, but still requires an IEEE1394 bus reset to work the second time
> a device is attached. Note this is a laptop, so it only has one
> processor.

You did do rescan-scsi-bus.sh? What do you mean by "can't login"? Do you
mean it shows a login timeout, or that it doesn't even try? What does
/proc/bus/ieee1394/devices show?

Do I understand correctly that this is under cardbus?

--
Debian - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
Deqo - http://www.deqo.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:46    [W:0.055 / U:1.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site