[lkml]   [2003]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: hw tcp v4 csum failed

    > Hi,
    > I am getting "hw tcp v4 csum failed" errors using a BCM5701 ethernet
    > adapter with the tigon3 driver in a vanilla 2.4.20 kernel.
    > There seems to be no apparent problem (probably because of low-load).
    > What can be the cause of these errors?

    if it isnt a software problem.

    Its probably a problem releated to the cable or surrounding
    interference on the cable.

    a) loose connection either on back of machine or @ the hub / switch etc..
    b) there is a large power supply sitting very close to the cable.
    i have seen the transformers on scanners / printers etc.. strong enough
    todo this is the cable gets wrapped around it


    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:47    [W:0.022 / U:22.956 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site