lkml.org 
[lkml]   [2003]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] Re: Firmware loading problem
On Tue, Jul 22, 2003 at 05:38:15PM +0200, Marcel Holtmann wrote:
> Hi Manuel,
>
> > > I installed linux-2.6.0-test1-ac2 and tried to port my driver for the
> > > BlueFRITZ! USB Bluetooth dongle to 2.6. This device needs a firmware
> > > download and I want to use the new firmware class for getting the
> > > firmware file from userspace. After reading the documentation and
> > > testing the driver samples I got the results that I expected.
> > >
> > > My problem is now that the firmware loader is not working with my
> > > firmware file and it seems that this is a problem of the file size,
> > > because copying small files through the same interface is working fine.
> > > This is the file I want to load:
> > >
> > > -rw-r--r-- 1 holtmann staff 418352 Jul 11 12:38 bfubase.frm
> > >
> > > I have written my own firmware.agent hotplug script, which looks in
> > > general something like this:
> > >
> > > echo 1 > $LOADING
> > > cp bfubase.frm $DATA
> > > echo 0 > $LOADING
> > >
> > > Loading the above firmware file through this interface results in
> > > different behaviours. The results are complete freezes, instant reboots,
> > > X server crashes with black screens and sometimes I see an oops about
> > > virtual memory, but it goes bye bye too fast to let me do anything
> > > useful with it.
> >
> > Could you send me a tarball with a sample showing the problem. If
> > possible I would like to do "make test" and have it compile and crash
> > the system appropriately :)
>
> I tracked down the problem to request_firmware() or a sysfs problem.
> With the firmware included in a header file the driver itself works
> perfect.

You are right, the problem was in sysfs, attached goes a patch that
WorksForMe (tm), please test and report.

> Attached is a sample of how I use the request_firmware() and from the
> documentation it seems correct to me.

Not what I was asking for, but it seams OK.

About the patch:
- undo recent change, made in the believe that "buffer" was the
size of the whole file, it is just PAGE_SIZE in size.
- Since files are allowed to have unknown sizes, by
setting their size to 0, we can't preallocate a buffer
of their size on open.

- don't use any offset when handling buffer
- simplifies code
- since it is temporary storage it doesn't really matter

- undo relevant changes to request_firmware() code.

- hopefully adapt drivers/pci/pci-sysfs.c to this changes
- Please double check, I didn't look very carefully on
this.

Have a nice day

Manuel
--
--- Manuel Estrada Sainz <ranty@debian.org>
<ranty@bigfoot.com>
<ranty@users.sourceforge.net>
------------------------ <manuel.estrada@hispalinux.es> -------------------
Let us have the serenity to accept the things we cannot change, courage to
change the things we can, and wisdom to know the difference.
Index: drivers/base/firmware_class.c
===================================================================
RCS file: /home/cvs/linux-2.5/drivers/base/firmware_class.c,v
retrieving revision 1.3
diff -u -r1.3 firmware_class.c
--- drivers/base/firmware_class.c 4 Jul 2003 02:21:18 -0000 1.3
+++ drivers/base/firmware_class.c 26 Jul 2003 06:53:47 -0000
@@ -149,7 +149,7 @@
if (offset + count > fw->size)
count = fw->size - offset;

- memcpy(buffer + offset, fw->data + offset, count);
+ memcpy(buffer, fw->data + offset, count);
return count;
}
static int
@@ -198,7 +198,7 @@
if (retval)
return retval;

- memcpy(fw->data + offset, buffer + offset, count);
+ memcpy(fw->data + offset, buffer, count);

fw->size = max_t(size_t, offset + count, fw->size);

Index: drivers/pci/pci-sysfs.c
===================================================================
RCS file: /home/cvs/linux-2.5/drivers/pci/pci-sysfs.c,v
retrieving revision 1.6
diff -u -r1.6 pci-sysfs.c
--- drivers/pci/pci-sysfs.c 4 Jul 2003 02:21:18 -0000 1.6
+++ drivers/pci/pci-sysfs.c 26 Jul 2003 06:53:50 -0000
@@ -87,7 +87,7 @@
while (off & 3) {
unsigned char val;
pci_read_config_byte(dev, off, &val);
- buf[off] = val;
+ buf[0] = val;
off++;
if (--size == 0)
break;
@@ -96,10 +96,10 @@
while (size > 3) {
unsigned int val;
pci_read_config_dword(dev, off, &val);
- buf[off] = val & 0xff;
- buf[off + 1] = (val >> 8) & 0xff;
- buf[off + 2] = (val >> 16) & 0xff;
- buf[off + 3] = (val >> 24) & 0xff;
+ buf[0] = val & 0xff;
+ buf[1] = (val >> 8) & 0xff;
+ buf[2] = (val >> 16) & 0xff;
+ buf[3] = (val >> 24) & 0xff;
off += 4;
size -= 4;
}
@@ -107,7 +107,7 @@
while (size > 0) {
unsigned char val;
pci_read_config_byte(dev, off, &val);
- buf[off] = val;
+ buf[0] = val;
off++;
--size;
}
@@ -129,24 +129,24 @@
}

while (off & 3) {
- pci_write_config_byte(dev, off, buf[off]);
+ pci_write_config_byte(dev, off, buf[0]);
off++;
if (--size == 0)
break;
}

while (size > 3) {
- unsigned int val = buf[off];
- val |= (unsigned int) buf[off + 1] << 8;
- val |= (unsigned int) buf[off + 2] << 16;
- val |= (unsigned int) buf[off + 3] << 24;
+ unsigned int val = buf[0];
+ val |= (unsigned int) buf[1] << 8;
+ val |= (unsigned int) buf[2] << 16;
+ val |= (unsigned int) buf[3] << 24;
pci_write_config_dword(dev, off, val);
off += 4;
size -= 4;
}

while (size > 0) {
- pci_write_config_byte(dev, off, buf[off]);
+ pci_write_config_byte(dev, off, buf[0]);
off++;
--size;
}
Index: fs/sysfs/bin.c
===================================================================
RCS file: /home/cvs/linux-2.5/fs/sysfs/bin.c,v
retrieving revision 1.9
diff -u -r1.9 bin.c
--- fs/sysfs/bin.c 4 Jul 2003 02:21:18 -0000 1.9
+++ fs/sysfs/bin.c 26 Jul 2003 06:53:59 -0000
@@ -47,7 +47,7 @@
return ret;
count = ret;

- if (copy_to_user(userbuf, buffer + offs, count) != 0)
+ if (copy_to_user(userbuf, buffer, count) != 0)
return -EINVAL;

pr_debug("offs = %lld, *off = %lld, count = %zd\n", offs, *off, count);
@@ -83,7 +83,7 @@
count = size - offs;
}

- if (copy_from_user(buffer + offs, userbuf, count))
+ if (copy_from_user(buffer, userbuf, count))
return -EFAULT;

count = flush_write(dentry, buffer, offs, count);
\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.232 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site