lkml.org 
[lkml]   [2003]   [Jul]   [18]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateFri, 18 Jul 2003 10:34:58 +0200
Subject2.6.0-test1 gets corrupted data when loading init
FromAnders Gustafsson <>
Hi,

with 2.6.0-test1 I get error like unresolved symbol in libs used by init or
bad elf-file. Sometimes init manages to start and there are same type of
errors in bash when it tries to run initscripts. This is on a dual xeon, no
highmem (512M), ServerWorks chipset, aic79xx scsi, / on scsi.

It breaks between 2.5.70 and 2.5.70-bk1, which contains a update in the
aic79xx-drivers, so my guess is related to that.

Scsi-related hardware in machine:

scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs

scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs

(scsi1:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
  Vendor: SEAGATE   Model: ST373307LW        Rev: 0002
  Type:   Direct-Access                      ANSI SCSI revision: 03

-- 
Anders Gustafsson - andersg@0x63.nu - http://0x63.nu/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:46    [from the cache]
©2003-2008